Share via


az ams live-event

Manage live events for an Azure Media Service account.

Commands

Name Description Type Status
az ams live-event create

Create a live event.

Core GA
az ams live-event delete

Delete a live event.

Core GA
az ams live-event list

List all the live events of an Azure Media Services account.

Core GA
az ams live-event reset

Reset a live event.

Core GA
az ams live-event show

Show the details of a live event.

Core GA
az ams live-event standby

Allocate a live event to be started later.

Core GA
az ams live-event start

Start a live event.

Core GA
az ams live-event stop

Stop a live event.

Core GA
az ams live-event update

Update the details of a live event.

Core GA
az ams live-event wait

Place the CLI in a waiting state until a condition of the live event is met.

Core GA

az ams live-event create

Create a live event.

az ams live-event create --account-name
                         --ips
                         --name
                         --resource-group
                         --streaming-protocol {FragmentedMP4, RTMP}
                         [--access-token]
                         [--alternative-media-id]
                         [--auto-start]
                         [--client-access-policy]
                         [--cross-domain-policy]
                         [--description]
                         [--encoding-type]
                         [--hostname-prefix]
                         [--key-frame-interval]
                         [--key-frame-interval-duration]
                         [--no-wait]
                         [--preset-name]
                         [--preview-ips]
                         [--preview-locator]
                         [--stream-options {Default, LowLatency, LowLatencyV2}]
                         [--streaming-policy-name]
                         [--stretch-mode]
                         [--tags]
                         [--transcription-lang]
                         [--use-static-hostname]

Required Parameters

--account-name -a

The name of the Azure Media Services account.

--ips

Space-separated IP addresses for access control. Allowed IP addresses can be specified as either a single IP address (e.g. "10.0.0.1") or as an IP range using an IP address and a CIDR subnet mask (e.g. "10.0.0.1/22"). Use "" to clear existing list. Use "AllowAll" to allow all IP addresses. Allowing all IPs is not recommended for production environments.

--name -n

The name of the live event.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--streaming-protocol

The streaming protocol for the live event. This value is specified at creation time and cannot be updated.

Accepted values: FragmentedMP4, RTMP

Optional Parameters

--access-token

A unique identifier for a stream. This can be specified at creation time but cannot be updated. If omitted, the service will generate a unique value.

--alternative-media-id

An Alternative Media Identifier associated with the StreamingLocator created for the preview. This value is specified at creation time and cannot be updated. The identifier can be used in the CustomLicenseAcquisitionUrlTemplate or the CustomKeyAcquisitionUrlTemplate of the StreamingPolicy specified in the StreamingPolicyName field.

--auto-start

The flag indicates if the resource should be automatically started on creation.

Default value: False
--client-access-policy

Filepath to the clientaccesspolicy.xml used by Microsoft Silverlight and Adobe Flash. Use @{file} to load from a file.

--cross-domain-policy

Filepath to the crossdomain.xml used by Microsoft Silverlight and Adobe Flash. Use @{file} to load from a file.

--description

The live event description.

--encoding-type

The encoding type for live event. This value is specified at creation time and cannot be updated. Allowed values: Premium1080p, None, Standard.

--hostname-prefix

When useStaticHostname is set to true, hostname_prefix specifies the first part of the hostname assigned to the live event preview and ingest endpoints. The final hostname would be a combination of this prefix, the media service account name and a short code for the Azure Media Services data center.

--key-frame-interval

Use an ISO 8601 time value between 0.5 to 20 seconds to specify the output fragment length for the video and audiotracks of an encoding live event. For example, use PT2S to indicate 2 seconds. For the video track it also defines the key frame interval, or the length of a GoP (group of pictures). If this value is not set for anencoding live event, the fragment duration defaults to 2 seconds. The value cannot be set for pass-through live events.

--key-frame-interval-duration

ISO 8601 timespan duration of the key frame interval duration in seconds. The value should be an interger in the range of 1 (PT1S or 00:00:01) to 30 (PT30S or 00:00:30) seconds.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--preset-name

The encoding preset name. This value is specified at creation time and cannot be updated.

--preview-ips

Space-separated IP addresses for access control. Allowed IP addresses can be specified as either a single IP address (e.g. "10.0.0.1") or as an IP range using an IP address and a CIDR subnet mask (e.g. "10.0.0.1/22"). Use "" to clear existing list. Use "AllowAll" to allow all IP addresses. Allowing all IPs is not recommended for production environments.

--preview-locator

The identifier of the preview locator in Guid format. Specifying this at creation time allows the caller to know the preview locator url before the event is created. If omitted, the service will generate a random identifier. This value cannot be updated once the live event is created.

--stream-options

The options to use for the LiveEvent. This value is specified at creation time and cannot be updated.

Accepted values: Default, LowLatency, LowLatencyV2
--streaming-policy-name

The name of streaming policy used for the live event preview. This can be specified at creation time but cannot be updated.

--stretch-mode

Specifies how the input video will be resized to fit the desired output resolution(s). Default is None. Allowed values: None, AutoSize, AutoFit.

--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

--transcription-lang

Live transcription language for the live event. Allowed values: ca-ES, da-DK, de-DE, en-AU, en-CA, en-GB, en-IN, en-NZ, en-US, es-ES, es-MX, fi-FI, fr-CA, fr-FR, it-IT, nl-NL, pt-BR, pt-PT, sv-SE See https://go.microsoft.com/fwlink/?linkid=2133742 for more information about the live transcription feature.

--use-static-hostname

Specifies whether a static hostname would be assigned to the live event preview and ingest endpoints. This value can only be updated if the live event is in Standby state. If hostname_prefix is not specified, the live event name will be used as the hostname prefix.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az ams live-event delete

Delete a live event.

az ams live-event delete [--account-name]
                         [--ids]
                         [--name]
                         [--resource-group]
                         [--subscription]

Optional Parameters

--account-name -a

The name of the Azure Media Services account.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the live event.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az ams live-event list

List all the live events of an Azure Media Services account.

az ams live-event list --account-name
                       --resource-group

Examples

List all the live events by name and resourceState quickly.

az ams live-event list -a amsAccount -g resourceGroup --query [].{liveEventName:name,state:resourceState}

Required Parameters

--account-name -a

The name of the Azure Media Services account.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az ams live-event reset

Reset a live event.

az ams live-event reset [--account-name]
                        [--ids]
                        [--name]
                        [--no-wait]
                        [--resource-group]
                        [--subscription]

Optional Parameters

--account-name -a

The name of the Azure Media Services account.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the live event.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az ams live-event show

Show the details of a live event.

az ams live-event show [--account-name]
                       [--ids]
                       [--name]
                       [--resource-group]
                       [--subscription]

Optional Parameters

--account-name -a

The name of the Azure Media Services account.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the live event.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az ams live-event standby

Allocate a live event to be started later.

az ams live-event standby [--account-name]
                          [--ids]
                          [--name]
                          [--no-wait]
                          [--resource-group]
                          [--subscription]

Optional Parameters

--account-name -a

The name of the Azure Media Services account.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the live event.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az ams live-event start

Start a live event.

az ams live-event start [--account-name]
                        [--ids]
                        [--name]
                        [--no-wait]
                        [--resource-group]
                        [--subscription]

Optional Parameters

--account-name -a

The name of the Azure Media Services account.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the live event.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az ams live-event stop

Stop a live event.

az ams live-event stop [--account-name]
                       [--ids]
                       [--name]
                       [--no-wait]
                       [--remove-outputs-on-stop]
                       [--resource-group]
                       [--subscription]

Optional Parameters

--account-name -a

The name of the Azure Media Services account.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the live event.

--no-wait

Do not wait for the long-running operation to finish.

Default value: False
--remove-outputs-on-stop

Remove live outputs on stop.

Default value: False
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az ams live-event update

Update the details of a live event.

az ams live-event update [--account-name]
                         [--add]
                         [--client-access-policy]
                         [--cross-domain-policy]
                         [--description]
                         [--force-string]
                         [--ids]
                         [--ips]
                         [--key-frame-interval-duration]
                         [--name]
                         [--preview-ips]
                         [--remove]
                         [--resource-group]
                         [--set]
                         [--subscription]
                         [--tags]

Examples

Set a new allowed IP address and remove an existing IP address at index '0'.

az ams live-event update -a amsAccount -g resourceGroup -n liveEventName --remove input.accessControl.ip.allow 0 --add input.accessControl.ip.allow 1.2.3.4/22

Clear existing IP addresses and set new ones.

az ams live-event update -a amsAccount -g resourceGroup -n liveEventName --ips 1.2.3.4/22 5.6.7.8/30

Optional Parameters

--account-name -a

The name of the Azure Media Services account.

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

Default value: []
--client-access-policy

Filepath to the clientaccesspolicy.xml used by Microsoft Silverlight and Adobe Flash. Use @{file} to load from a file.

--cross-domain-policy

Filepath to the crossdomain.xml used by Microsoft Silverlight and Adobe Flash. Use @{file} to load from a file.

--description

The live event description.

--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--ips

Space-separated IP addresses for access control. Allowed IP addresses can be specified as either a single IP address (e.g. "10.0.0.1") or as an IP range using an IP address and a CIDR subnet mask (e.g. "10.0.0.1/22"). Use "" to clear existing list. Use "AllowAll" to allow all IP addresses. Allowing all IPs is not recommended for production environments.

--key-frame-interval-duration

ISO 8601 timespan duration of the key frame interval duration in seconds. The value should be an interger in the range of 1 (PT1S or 00:00:01) to 30 (PT30S or 00:00:30) seconds.

--name -n

The name of the live event.

--preview-ips

Space-separated IP addresses for access control. Allowed IP addresses can be specified as either a single IP address (e.g. "10.0.0.1") or as an IP range using an IP address and a CIDR subnet mask (e.g. "10.0.0.1/22"). Use "" to clear existing list. Use "AllowAll" to allow all IP addresses. Allowing all IPs is not recommended for production environments.

--remove

Remove a property or an element from a list. Example: --remove property.list <indexToRemove> OR --remove propertyToRemove.

Default value: []
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=<value>.

Default value: []
--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--tags

Space-separated tags: key[=value] [key[=value] ...]. Use "" to clear existing tags.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az ams live-event wait

Place the CLI in a waiting state until a condition of the live event is met.

az ams live-event wait [--account-name]
                       [--created]
                       [--custom]
                       [--deleted]
                       [--exists]
                       [--ids]
                       [--interval]
                       [--name]
                       [--resource-group]
                       [--subscription]
                       [--timeout]
                       [--updated]

Examples

Place the CLI in a waiting state until the live event is created.

az ams live-event wait -g MyResourceGroup -a MyAmsAccount -n MyLiveEvent --created

Optional Parameters

--account-name -a

The name of the Azure Media Services account.

--created

Wait until created with 'provisioningState' at 'Succeeded'.

Default value: False
--custom

Wait until the condition satisfies a custom JMESPath query. E.g. provisioningState!='InProgress', instanceView.statuses[?code=='PowerState/running'].

--deleted

Wait until deleted.

Default value: False
--exists

Wait until the resource exists.

Default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--interval

Polling interval in seconds.

Default value: 30
--name -n

The name of the live event.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--timeout

Maximum wait in seconds.

Default value: 3600
--updated

Wait until updated with provisioningState at 'Succeeded'.

Default value: False
Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

Accepted values: json, jsonc, none, table, tsv, yaml, yamlc
Default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.