編集

次の方法で共有


Set-CsTeamsComplianceRecordingApplication

Modifies an existing association between an application instance of a policy-based recording application and a Teams recording policy for administering automatic policy-based recording in your tenant. Automatic policy-based recording is only applicable to Microsoft Teams users.

Syntax

Set-CsTeamsComplianceRecordingApplication
   [-Tenant <System.Guid>]
   [-Identity <XdsIdentity>]
   [-RequiredBeforeMeetingJoin <Boolean>]
   [-RequiredDuringMeeting <Boolean>]
   [-RequiredBeforeCallEstablishment <Boolean>]
   [-RequiredDuringCall <Boolean>]
   [-ConcurrentInvitationCount <UInt32>]
   [-ComplianceRecordingPairedApplications <ComplianceRecordingPairedApplication[]>]
   [-Priority <Int32>]
   [-Force]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CsTeamsComplianceRecordingApplication
   [-Tenant <System.Guid>]
   [-Instance <PSObject>]
   [-RequiredBeforeMeetingJoin <Boolean>]
   [-RequiredDuringMeeting <Boolean>]
   [-RequiredBeforeCallEstablishment <Boolean>]
   [-RequiredDuringCall <Boolean>]
   [-ConcurrentInvitationCount <UInt32>]
   [-ComplianceRecordingPairedApplications <ComplianceRecordingPairedApplication[]>]
   [-Priority <Int32>]
   [-Force]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

Policy-based recording applications are used in automatic policy-based recording scenarios. When Microsoft Teams users participate in meetings or make or receive calls, the policy-based recording applications i.e. bots associated with the user's Teams recording policy are invited into the call or meeting to enforce compliance with the administrative set policy.

Instances of these applications are created using CsOnlineApplicationInstance cmdlets and are then associated with Teams recording policies.

Note that application instances of policy-based recording applications must be associated with a Teams recording policy using the CsTeamsComplianceRecordingApplication cmdlets. Once the association is done, the Identity of these application instances becomes <Identity of the associated Teams recording policy>/<ObjectId of the application instance>. For example, the Identity of an application instance can be "Tag:ContosoPartnerComplianceRecordingPolicy/39dc3ede-c80e-4f19-9153-417a65a1f144", which indicates that the application instance with ObjectId 39dc3ede-c80e-4f19-9153-417a65a1f144 is associated with the Teams recording policy with Identity ContosoPartnerComplianceRecordingPolicy.

Please work with your Microsoft certified policy-based recording application provider to obtain an instance of their recording application. Please refer to the documentation of the CsOnlineApplicationInstance cmdlets for information on how to create an application instance of a policy-based recording application. Please also refer to the documentation of CsTeamsComplianceRecordingPolicy cmdlets for further information.

Examples

Example 1

PS C:\> Set-CsTeamsComplianceRecordingApplication -Identity 'Tag:ContosoPartnerComplianceRecordingPolicy/d93fefc7-93cc-4d44-9a5d-344b0fff2899' -RequiredBeforeMeetingJoin $false -RequiredDuringMeeting $false

The command shown in Example 1 modifies an existing association between an application instance of a policy-based recording application with ObjectId d93fefc7-93cc-4d44-9a5d-344b0fff2899 and a Teams recording policy with the Identity ContosoPartnerComplianceRecordingPolicy.

In this example, the application is made optional for meetings. Please refer to the documentation of the RequiredBeforeMeetingJoin and RequiredDuringMeeting parameters for more information.

Example 2

PS C:\> Set-CsTeamsComplianceRecordingApplication -Identity 'Tag:ContosoPartnerComplianceRecordingPolicy/d93fefc7-93cc-4d44-9a5d-344b0fff2899' -RequiredBeforeCallEstablishment $false -RequiredDuringCall $false

The command shown in Example 2 modifies an existing association between an application instance of a policy-based recording application with ObjectId d93fefc7-93cc-4d44-9a5d-344b0fff2899 and a Teams recording policy with the Identity ContosoPartnerComplianceRecordingPolicy.

In this example, the application is made optional for calls. Please refer to the documentation of the RequiredBeforeCallEstablishment and RequiredDuringCall parameters for more information.

Example 3

PS C:\> Set-CsTeamsComplianceRecordingApplication -Identity 'Tag:ContosoPartnerComplianceRecordingPolicy/d93fefc7-93cc-4d44-9a5d-344b0fff2899' -ConcurrentInvitationCount 2

The command shown in Example 3 modifies an existing association between an application instance of a policy-based recording application with ObjectId d93fefc7-93cc-4d44-9a5d-344b0fff2899 and a Teams recording policy with the Identity ContosoPartnerComplianceRecordingPolicy.

In this example, the application is made resilient by specifying that two invites must be sent to the same application for the same call or meeting. Please refer to the documentation of the ConcurrentInvitationCount parameter for more information.

Example 4

PS C:\> Set-CsTeamsComplianceRecordingApplication -Identity 'Tag:ContosoPartnerComplianceRecordingPolicy/d93fefc7-93cc-4d44-9a5d-344b0fff2899' -ComplianceRecordingPairedApplications @(New-CsTeamsComplianceRecordingPairedApplication -Id '39dc3ede-c80e-4f19-9153-417a65a1f144')

The command shown in Example 4 modifies an existing association between an application instance of a policy-based recording application with ObjectId d93fefc7-93cc-4d44-9a5d-344b0fff2899 and a Teams recording policy with the Identity ContosoPartnerComplianceRecordingPolicy.

In this example, the application is made resilient by pairing it with another application instance of a policy-based recording application with ObjectId 39dc3ede-c80e-4f19-9153-417a65a1f144. Separate invites are sent to the paired applications for the same call or meeting. Please refer to the documentation of the ComplianceRecordingPairedApplications parameter for more information.

Example 5

PS C:\> Set-CsTeamsComplianceRecordingApplication -Identity 'Tag:ContosoPartnerComplianceRecordingPolicy/d93fefc7-93cc-4d44-9a5d-344b0fff2899' -ComplianceRecordingPairedApplications $null

The command shown in Example 5 modifies an existing association between an application instance of a policy-based recording application with ObjectId d93fefc7-93cc-4d44-9a5d-344b0fff2899 and a Teams recording policy with the Identity ContosoPartnerComplianceRecordingPolicy.

In this example, the application's resiliency is removed by removing the pairing it had with the application instance of a policy-based recording application with ObjectId 39dc3ede-c80e-4f19-9153-417a65a1f144. Please refer to the documentation of the ComplianceRecordingPairedApplications parameter for more information.

Example 6

PS C:\> Get-CsTeamsComplianceRecordingApplication | Set-CsTeamsComplianceRecordingApplication -RequiredBeforeMeetingJoin $false -RequiredDuringMeeting $false

The command shown in Example 6 modifies all existing associations between application instances of policy-based recording applications and their corresponding Teams recording policy.

In this example, all applications are made optional for meetings. Please refer to the documentation of the RequiredBeforeMeetingJoin and RequiredDuringMeeting parameters for more information.

Parameters

-ComplianceRecordingPairedApplications

Determines the other policy-based recording applications to pair with this application to achieve application resiliency. Can only have one paired application.

In situations where application resiliency is a necessity, invites can be sent to separate paired applications for the same call or meeting. If multiple such invites are accepted, then it means that multiple instances of this application are in the call or meeting and each of those instances can record independent of the others.

If all of the invites are rejected, the application invitation process is deemed a failure and the other flags for this application control what happens next. Please refer to the documentation of the RequiredBeforeMeetingJoin and RequiredBeforeCallEstablishment parameters.

If at least one of the invites is accepted and the others are rejected, the application invitation process is still deemed a success.

If multiple invites are accepted and all of the instances leave or get dropped from the call or meeting, then the application is no longer in the call or meeting and the other flags for this application control what happens next. Please refer to the documentation of the RequiredDuringMeeting and RequiredDuringCall parameters.

If multiple invites are accepted and at least one of the instances remains in the call or meeting, then the application is in the call or meeting.

Note that application resiliency can be achieved either by sending multiple invites to the same application using ConcurrentInvitationCount or by sending invites to separate paired applications using ComplianceRecordingPairedApplications. However, you cannot do both. Please work with your Microsoft certified policy-based recording application provider to determine if application resiliency is needed for your workflows and how best to achieve application resiliency.

Type:ComplianceRecordingPairedApplication[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ConcurrentInvitationCount

Determines the number of invites to send out to the application instance of the policy-based recording application. Can be set to 1 or 2 only.

In situations where application resiliency is a necessity, multiple invites can be sent to the same application for the same call or meeting. If multiple such invites are accepted, then it means that multiple instances of this application are in the call or meeting and each of those instances can record independent of the others.

If all of the invites are rejected, the application invitation process is deemed a failure and the other flags for this application control what happens next. Please refer to the documentation of the RequiredBeforeMeetingJoin and RequiredBeforeCallEstablishment parameters.

If at least one of the invites is accepted and the others are rejected, the application invitation process is still deemed a success.

If multiple invites are accepted and all of the instances leave or get dropped from the call or meeting, then the application is no longer in the call or meeting and the other flags for this application control what happens next. Please refer to the documentation of the RequiredDuringMeeting and RequiredDuringCall parameters.

If multiple invites are accepted and at least one of the instances remains in the call or meeting, then the application is in the call or meeting.

Note that application resiliency can be achieved either by sending multiple invites to the same application using ConcurrentInvitationCount or by sending invites to separate paired applications using ComplianceRecordingPairedApplications. However, you cannot do both. Please work with your Microsoft certified policy-based recording application provider to determine if application resiliency is needed for your workflows and how best to achieve application resiliency.

Type:UInt32
Position:Named
Default value:1
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Force

Suppresses the display of any non-fatal error message that might arise when running the command.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Identity

A name that uniquely identifies the application instance of the policy-based recording application.

Application instances of policy-based recording applications must be associated with a Teams recording policy using the CsTeamsComplianceRecordingApplication cmdlets. To do this association correctly, the Identity of these application instances must be <Identity of the associated Teams recording policy>/<ObjectId of the application instance>. For example, the Identity of an application instance can be "Tag:ContosoPartnerComplianceRecordingPolicy/39dc3ede-c80e-4f19-9153-417a65a1f144", which indicates that the application instance with ObjectId 39dc3ede-c80e-4f19-9153-417a65a1f144 is associated with the Teams recording policy with Identity ContosoPartnerComplianceRecordingPolicy.

Type:XdsIdentity
Position:1
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Instance

Allows you to pass a reference to an object to the cmdlet rather than set individual parameter values.

Type:PSObject
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Priority

This priority determines the order in which the policy-based recording applications are displayed in the output of the Get-CsTeamsComplianceRecordingPolicy cmdlet.

All policy-based recording applications are invited in parallel to ensure low call setup and meeting join latencies. So this parameter does not affect the order of invitations to the applications, or any other routing.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RequiredBeforeCallEstablishment

Indicates whether the policy-based recording application must be in the call before the call is allowed to establish.

If this is set to True, the call will be cancelled if the policy-based recording application fails to join the call.

If this is set to False, call establishment will proceed normally if the policy-based recording application fails to join the call.

Type:Boolean
Position:Named
Default value:True
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RequiredBeforeMeetingJoin

Indicates whether the policy-based recording application must be in the meeting before the user is allowed to join the meeting.

If this is set to True, the user will not be allowed to join the meeting if the policy-based recording application fails to join the meeting. The meeting will still continue for users who are in the meeting.

If this is set to False, the user will be allowed to join the meeting even if the policy-based recording application fails to join the meeting.

Type:Boolean
Position:Named
Default value:True
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RequiredDuringCall

Indicates whether the policy-based recording application must be in the call while the call is active.

If this is set to True, the call will be cancelled if the policy-based recording application leaves the call or is dropped from the call.

If this is set to False, call establishment will proceed normally if the policy-based recording application leaves the call or is dropped from the call.

Type:Boolean
Position:Named
Default value:True
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RequiredDuringMeeting

Indicates whether the policy-based recording application must be in the meeting while the user is in the meeting.

If this is set to True, the user will be ejected from the meeting if the policy-based recording application leaves the meeting or is dropped from the meeting. The meeting will still continue for users who are in the meeting.

If this is set to False, the user will not be ejected from the meeting if the policy-based recording application leaves the meeting or is dropped from the meeting.

Type:Boolean
Position:Named
Default value:True
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Tenant

Globally unique identifier (GUID) of the tenant account whose Teams recording policies are being queried. For example:

-Tenant "38aad667-af54-4397-aaa7-e94c79ec2308"

You can return your tenant ID by running this command:

Get-CsTenant | Select-Object DisplayName, TenantID

If you are using a remote session of Windows PowerShell and are connected only to Skype for Business Online you do not have to include the Tenant parameter. Instead, the tenant ID will automatically be filled in for you based on your connection information. The Tenant parameter is primarily for use in a hybrid deployment.

Type:System.Guid
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

System.Management.Automation.PSObject

Outputs

System.Object