Editar

Compartilhar via


New-NetFirewallRule

Creates a new inbound or outbound firewall rule and adds the rule to the target computer.

Syntax

New-NetFirewallRule
   [-PolicyStore <String>]
   [-GPOSession <String>]
   [-Name <String>]
   -DisplayName <String>
   [-Description <String>]
   [-Group <String>]
   [-Enabled <Enabled>]
   [-Profile <Profile>]
   [-Platform <String[]>]
   [-Direction <Direction>]
   [-Action <Action>]
   [-EdgeTraversalPolicy <EdgeTraversal>]
   [-LooseSourceMapping <Boolean>]
   [-LocalOnlyMapping <Boolean>]
   [-Owner <String>]
   [-LocalAddress <String[]>]
   [-RemoteAddress <String[]>]
   [-Protocol <String>]
   [-LocalPort <String[]>]
   [-RemotePort <String[]>]
   [-IcmpType <String[]>]
   [-DynamicTarget <DynamicTransport>]
   [-Program <String>]
   [-Package <String>]
   [-Service <String>]
   [-InterfaceAlias <WildcardPattern[]>]
   [-InterfaceType <InterfaceType>]
   [-LocalUser <String>]
   [-RemoteUser <String>]
   [-RemoteMachine <String>]
   [-Authentication <Authentication>]
   [-Encryption <Encryption>]
   [-OverrideBlockRules <Boolean>]
   [-RemoteDynamicKeywordAddresses <String[]>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The New-NetFirewallRule cmdlet creates an inbound or outbound firewall rule and adds the rule to the target computer.

Some parameters are used to specify the conditions that must be matched for the rule to apply, such as the LocalAddress and RemoteAddress parameters. Other parameters specify the way that the connection should be secured, like the Authentication and Encryption parameters. Rules that already exist can be managed with the Get-NetFirewallRule and Set-NetFirewallRule cmdlets.

Filter objects, such as NetFirewallAddressFilter or NetFirewallApplicationFilter, are created with each firewall rule. The filter objects and rules are always one-to-one and are managed automatically.

Examples

EXAMPLE 1

PS C:\> New-NetFirewallRule -DisplayName "Block Outbound Port 80" -Direction Outbound -LocalPort 80 -Protocol TCP -Action Block

This example creates an outbound firewall rule to block all of the traffic from the local computer that originates on TCP port 80.

EXAMPLE 2

PS C:\> New-NetFirewallRule -DisplayName "Block WINS" -Direction Inbound -Action Block -RemoteAddress WINS

This example creates a firewall rule that blocks all inbound traffic from all WINS servers.

EXAMPLE 3

PS C:\> New-NetFirewallRule -DisplayName "Allow Messenger" -Direction Inbound -Program "C:\Program Files (x86)\Messenger\msmsgs.exe" -RemoteAddress LocalSubnet -Action Allow

This example creates an inbound firewall rule that allows traffic for the Windows Messenger program only from computers on the same subnet as the local computer.

EXAMPLE 4

PS C:\> New-NetFirewallRule -DisplayName "Allow Authenticated Messenger" -Direction Inbound -Program "C:\Program Files (x86)\Messenger\msmsgs.exe" -Authentication Required -Action Allow

This example creates a firewall rule that allows inbound Windows Messenger network traffic only if the connection from the remote computer is authenticated by using a separate IPsec rule.

EXAMPLE 5

PS C:\> New-NetFirewallRule -DisplayName "Allow Only Specific Computers and Users" -Direction Inbound -RemoteMachine "D:(A;;CC;;;SIDforMachineGroupAccount)"  -RemoteUser "D:(A;;CC;;;SIDforUserGroupAccount)"  -Action Allow -Authentication Required

This example creates a firewall rule that allows all of the network traffic from computers that are members of a specific computer group, and only from users that are members of a specific user group. Both memberships must be confirmed by authentication using a separate connection security rule.

EXAMPLE 6

PS C:\> New-NetFirewallRule -Name "Block Wireless In" -Direction Inbound -InterfaceType Wireless -Action Block
PS C:\> New-NetFirewallRule -Name "Block Wireless Out" -Direction Outbound -InterfaceType Wireless -Action Block

This example uses two cmdlets to create firewall rules that block all of the wireless network traffic.

EXAMPLE 7

PS C:\> New-NetFirewallRule -DisplayName "Allow TCP 12345 and 5000-5020 over Teredo" -Direction Inbound -Action Allow -EdgeTraversalPolicy Allow -Protocol TCP -LocalPort 12345,5000-5020 -Program "C:\Program Files (x86)\TestIPv6App.exe"

This example creates a firewall rule to allow TCP traffic addressed to port 12345 and the range of ports 5000-5020 to a specific application from the computers on the remote side of an edge (NAT) device, using the Teredo IPv6 interface.

Parameters

-Action

Specifies that matching firewall rules of the indicated action are created. This parameter specifies the action to take on traffic that matches this rule. The acceptable values for this parameter are: Allow or Block.

  • Allow: Network packets that match all criteria specified in this rule are permitted through the firewall. This is the default value.
  • Block: Network packets that match all criteria specified in this rule are dropped by the firewall. The default value is Allow. The OverrideBlockRules field changes an allow rule into an allow bypass rule.
Type:Action
Accepted values:NotConfigured, Allow, Block
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-AsJob

Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Authentication

Specifies that authentication is required on firewall rules. The acceptable values for this parameter are: NotRequired, Required, or NoEncap.

  • NotRequired: Any network packet matches this rule, that it is protected by IPsec. This option is the equivalent of not selecting the allow only secure connections option in the Windows Firewall with Advanced Security MMC snap-in.
  • Required: Network packets that are authenticated by IPsec match this rule. A separate IPsec rule must be created to authenticate the traffic. This option is the equivalent of the allow only secure connections option in the Windows Firewall with Advanced Security MMC snap-in. This is the default value.
  • NoEncap: Network connections that are authenticated, but not encapsulated by Encapsulating Security Payload (ESP) or Authentication Header (AH) match this rule. This option is useful for connections that must be monitored by network equipment, such as intrusion detection systems (IDS), that are not compatible with ESP NULL-protected network packets. The initial connection is authenticated by IPsec by using AuthIP, but the quick mode SA permits clear-text traffic. To use this option, you must also configure an IPsec rule that specifies authentication with encapsulation none as a quick mode security method. In the Microsoft Management Console (MMC), authentication and encryption are combined into one set of radio buttons. In Windows Management Instrumentation (WMI) or Windows PowerShell®, authentication and encryption are given as two separate options. A rule can be queried for this condition, or modified by using the security filter object. See the Get-NetFirewallSecurityFilter cmdlet for more information.
Type:Authentication
Accepted values:NotRequired, Required, NoEncap
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Description

Specifies that matching firewall rules of the indicated description are created. Wildcard characters are accepted. This parameter provides information about the firewall rule. This parameter specifies the localized, user-facing description of the IPsec rule.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Direction

Specifies that matching firewall rules of the indicated direction are created. This parameter specifies which direction of traffic to match with this rule. The acceptable values for this parameter are: Inbound or Outbound. The default value is Inbound.

Type:Direction
Accepted values:Inbound, Outbound
Position:Named
Default value:Inbound
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DisplayName

Specifies that only matching firewall rules of the indicated display name are created. Wildcard characters are accepted. Specifies the localized, user-facing name of the firewall rule being created. When creating a rule this parameter is required. This parameter value is locale-dependent. If the object is not modified, then this parameter value may change in certain circumstances. When writing scripts in multi-lingual environments, the Name parameter should be used instead, where the default value is a randomly assigned value. This parameter cannot be set to All.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-DynamicTarget

Specifies a dynamic transport. The cmdlet adds the dynamic transport that you specify as a condition that must be matched for the firewall rule to apply. The acceptable values for this parameter are:

  • Any
  • ProximityApps
  • ProximitySharing
  • WifiDirectPrinting
  • WifiDirectDisplay
  • WifiDirectDevices

The default value is Any.

Some types of dynamic transports, such as proximity sharing, abstract the network layer details. This means that you cannot use standard network layer conditions, such as protocols and ports, to identify the dynamic transports.

Type:DynamicTransport
Aliases:DynamicTransport
Accepted values:Any, ProximityApps, ProximitySharing, WifiDirectPrinting, WifiDirectDisplay, WifiDirectDevices
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-EdgeTraversalPolicy

Specifies that matching firewall rules of the indicated edge traversal policy are created. This parameter specifies how this firewall rule will handle edge traversal cases. Valid only when the Direction parameter is set to Inbound. The acceptable values for this parameter are: Block, Allow, DeferToUser, or DeferToApp. This parameter specifies that traffic that traverses an edge device, such as a network address translation (NAT)-enabled router, between the local and remote computer matches this rule. If this parameter is set to DeferToUser or DeferToApp, then Windows allows the user or application to programmatically register with the firewall to receive inbound unsolicited application traffic from the edge device.

Type:EdgeTraversal
Accepted values:Block, Allow, DeferToUser, DeferToApp
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Enabled

Specifies that matching firewall rules of the indicated state are created. This parameter specifies that the rule object is administratively enabled or administratively disabled. The acceptable values for this parameter are:

  • True: Specifies the rule is currently enabled.
  • False: Specifies the rule is currently disabled.

Note, that the type of this parameter is not boolean, therefore $true and $false variables are not acceptable values here. Use "True" and "False" text strings instead.

A disabled rule will not actively modify computer behavior, but the management construct still exists on the computer so it can be re-enabled.

Type:Enabled
Accepted values:True, False
Position:Named
Default value:True
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Encryption

Specifies that encryption in authentication is required on firewall rules. The authentication is done through a separate IPsec or main mode rule. The acceptable values for this parameter are: NotRequired, Required, or Dynamic.

  • NotRequired: Encryption is not required for authentication. This is the default value.
  • Required: Encryption is required for authentication through an IPsec rule.
  • Dynamic: Allows computers to dynamically negotiate encryption. A rule can be queried for this condition, or modified by using the security filter object. See the Get-NetFirewallSecurityFilter cmdlet for more information.
Type:Encryption
Accepted values:NotRequired, Required, Dynamic
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-GPOSession

Specifies the network GPO from which to retrieve the rules to be created. This parameter is used in the same way as the PolicyStore parameter. When modifying GPOs in Windows PowerShell®, each change to a GPO requires the entire GPO to be loaded, modified, and saved back. On a busy Domain Controller (DC), this can be a slow and resource-heavy operation. A GPO Session loads a domain GPO onto the local computer and makes all changes in a batch, before saving it back. This reduces the load on the DC and speeds up the Windows PowerShell cmdlets. To load a GPO Session, use the Open-NetGPO cmdlet. To save a GPO Session, use the Save-NetGPO cmdlet.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Group

Specifies that only matching firewall rules of the indicated group association are copied. Wildcard characters are accepted. This parameter specifies the source string for the DisplayGroup parameter. If the DisplayGroup parameter value is a localizable string, then this parameter contains an indirect string. Rule groups can be used to organize rules by influence and allows batch rule modifications. Using the Set-NetFirewallRule cmdlets, if the group name is specified for a set of rules or sets, then all of the rules or sets in that group receive the same set of modifications. It is a good practice to specify this parameter value with a universal and world-ready indirect @FirewallAPI name. The DisplayGroup parameter cannot be specified upon object creation using the New-NetFirewallRule cmdlet, but can be modified using dot-notation and the Set-NetFirewallRule cmdlet.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IcmpType

Specifies the ICMP type codes. The key encoding is specified by running the Set-NetFirewallSetting cmdlet with the KeyEncoding parameter. The acceptable values for this parameter are:

  • ICMP type code: 0-255.
  • ICMP type code pairs: 3:4.
  • Keyword: Any.

A rule can be queried for this condition, modified by using the security filter object, or both. See the Get-NetFirewallPortFilter cmdlet for more information.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InterfaceAlias

Specifies the alias of the interface that applies to the traffic. Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallInterfaceFilter cmdlet for more information.

Type:WildcardPattern[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InterfaceType

Specifies that only network connections made through the indicated interface types are subject to the requirements of this rule. This parameter specifies different authentication requirements for each of the three main network types. The acceptable values for this parameter are: Any, Wired, Wireless, or RemoteAccess. The default value is Any. Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallInterfaceTypeFilter cmdlet for more information.

Type:InterfaceType
Accepted values:Any, Wired, Wireless, RemoteAccess
Position:Named
Default value:Any
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-LocalAddress

Specifies that network packets with matching IP addresses match this rule. This parameter value is the first end point of an IPsec rule and specifies the computers that are subject to the requirements of this rule. This parameter value is an IPv4 or IPv6 address, hostname, subnet, range, or the following keyword: Any. The acceptable formats for this parameter are:

  • Single IPv4 Address: 1.2.3.4
  • Single IPv6 Address: fe80::1
  • IPv4 Subnet (by network bit count): 1.2.3.4/24
  • IPv6 Subnet (by network bit count): fe80::1/48
  • IPv4 Subnet (by network mask): 1.2.3.4/255.255.255.0
  • IPv4 Range: 1.2.3.4-1.2.3.7
  • IPv6 Range: fe80::1-fe80::9 Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallAddressFilter cmdlet for more information.
Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-LocalOnlyMapping

Indicates that matching firewall rules of the indicated value are created. This parameter specifies the firewall rules for local only mapping, which describes whether a packet must pass through a local address on the way to the destination. Non-TCP traffic is session-less. Windows Firewall authorizes traffic per session, not per packet, for performance reasons. Generally, non-TCP sessions are inferred by checking the following fields: local address, remote address, protocol, local port, and remote port. If this parameter is set to True, then the remote address and port will be ignored when inferring remote sessions. Sessions will be grouped based on local address, protocol, and local port. This is similar to the LooseSourceMapping parameter, but performs better in cases where the traffic does not need to be filtered by remote address. This could improve performance on heavy server workloads where UDP requests come from dynamic client ports. For instance, Teredo relay servers.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-LocalPort

Specifies that network packets with matching IP local port numbers match this rule. The acceptable value is a port, range, or keyword and depends on the protocol. If the Protocol parameter value is TCP or UDP, then the acceptable values for this parameter are:

  • Port range: 0-65535.
  • Port number: 80.
  • Keyword: PlayToDiscovery or Any.

If the Protocol parameter value is ICMPv4 or ICMPv6, then the acceptable values for this parameter are:

  • An ICMP type, code pair: 0, 8.
  • Type and code: 0-255.
  • Keyword: Any.

If the Protocol parameter is not specified, then the acceptable values for this parameter are: RPC, RPCEPMap, Teredo, IPHTTPSIn, IPHTTPSOut, or Any. IPHTTPS is only supported on Windows Server 2012. Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallPortFilter cmdlet for more information.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-LocalUser

Specifies the principals to which network traffic this firewall rule applies. Principals for which the network traffic this firewall rule should apply. The principals, represented by security identifiers (SIDs) in the security descriptor definition language (SDDL) string, are services, users, application containers, or any SID to which network traffic is associated. This parameter specifies that only network packets that are authenticated as coming from or going to a principal identified in the list of accounts (SID) match this rule. Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallSecurityFilter cmdlet for more information.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-LooseSourceMapping

Indicates that matching firewall rules of the indicated value are created. This parameter specifies the firewall rules for loose source mapping, which describes whether a packet can have a non-local source address when being forwarded to a destination. If this parameter is set to True, then the rule accepts packets incoming from a host other than the one the packets were sent to. This parameter applies only to UDP protocol traffic. The default value is False.

Type:Boolean
Aliases:LSM
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Name

Specifies that only matching firewall rules of the indicated name are created. Wildcard characters are accepted. This parameter acts just like a file name, in that only one rule with a given name may exist in a policy store at a time. During group policy processing and policy merge, rules that have the same name but come from multiple stores being merged, will overwrite one another so that only one exists. This overwriting behavior is desirable if the rules serve the same purpose. For instance, all of the firewall rules have specific names, so if an administrator can copy these rules to a GPO, and the rules will override the local versions on a local computer. GPOs can have precedence. So if an administrator has a different or more specific rule with the same name in a higher-precedence GPO, then it overrides other rules that exist. The default value is a randomly assigned value. When the defaults for main mode encryption need to overridden, specify the customized parameters and set this parameter, making it the new default setting for encryption.

Type:String
Aliases:ID
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-OverrideBlockRules

Indicates that matching network traffic that would otherwise be blocked are allowed. The network traffic must be authenticated by using a separate IPsec rule. If the Direction parameter is set to Inbound, then this parameter is valid only for rules that have one or more accounts listed in the RemoteUser parameter and optionally the RemoteMachine parameter. Network packets that match this rule and that are successfully authenticated against a computer account specified in the RemoteUser parameter and against a user account identified in the RemoteMachine parameter are permitted through the firewall. If this parameter is specified, then the Authentication parameter cannot be set to NotRequired. This parameter is equivalent to the override block rules checkbox in the Windows Firewall with Advanced Security MMC snap-in. For computers that are running Windows® 7 or nextref_server_7, this parameter is permitted on an outbound rule. Selecting this parameter on an outbound rule causes matching traffic to be permitted through this rule even if other matching rules would block the traffic. No accounts are required in the RemoteMachine or RemoteUser parameter for an outbound bypass rule, however, if authorized or excepted computers are listed in those groups the rules will be enforced. This parameter is not valid on outbound rules on computers that are running firstref_vista or earlier. Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallSecurityFilter cmdlet for more information.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Owner

Specifies that matching firewall rules of the indicated owner are created. This parameter specifies the owner of the firewall rule, represented as an SDDL string. All Windows Store applications that require network traffic create network isolation rules (normally through installing via the Store), where the user that installed the application is the owner. This parameter specifies that only network packets that are authenticated as coming from or going to an owner identified in the list of accounts (SID) match this rule.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Package

Specifies the Windows Store application to which the firewall rule applies. This parameter is specified as a security identifier (SID). Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallApplicationFilter cmdlet for more information.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Platform

Specifies which version of Windows the associated rule applies. The acceptable format for this parameter is a number in the Major.Minor format. The version number of 6.0 corresponds to Vista (nextref_vista), 6.1 corresponds to Win7 (Windows® 7 or firstref_longhorn), and 6.2 corresponds to Win8 (Windows® 8 or Windows Server 2012). If + is not specified, then only that version is associated. If + is specified, then that version and later versions are associated. Querying for rules with this parameter with the Get-NetFirewallRule cmdlet cannot be performed.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PolicyStore

Specifies the policy store from which to retrieve the rules to be created. A policy store is a container for firewall and IPsec policy. The acceptable values for this parameter are:

  • PersistentStore: Sometimes called static rules, this store contains the persistent policy for the local computer. This policy is not from GPOs, and has been created manually or programmatically (during application installation) on the computer. Rules created in this store are attached to the ActiveStore and activated on the computer immediately.
  • ActiveStore: This store contains the currently active policy, which is the sum of all policy stores that apply to the computer. This is the resultant set of policy (RSOP) for the local computer (the sum of all GPOs that apply to the computer), and the local stores (the PersistentStore, the static Windows service hardening (WSH), and the configurable WSH). ---- GPOs are also policy stores. Computer GPOs can be specified as follows. ------ -PolicyStore hostname. ---- Active Directory GPOs can be specified as follows. ------ -PolicyStore domain.fqdn.com\GPO_Friendly_Namedomain.fqdn.comGPO_Friendly_Name. ------ Such as the following. -------- -PolicyStore localhost -------- -PolicyStore corp.contoso.com\FirewallPolicy ---- Active Directory GPOs can be created using the New-GPO cmdlet or the Group Policy Management Console.
  • RSOP: This read-only store contains the sum of all of the GPOs applied to the local computer.
  • SystemDefaults: This read-only store contains the default state of firewall rules that ship with Windows Server 2012.
  • StaticServiceStore: This read-only store contains all the service restrictions that ship with Windows Server 2012. Optional and product-dependent features are considered part of Windows Server 2012 for the purposes of WFAS.
  • ConfigurableServiceStore: This read-write store contains all the service restrictions that are added for third-party services. In addition, network isolation rules that are created for Windows Store application containers will appear in this policy store. The default value is PersistentStore. The Set-NetFirewallRule cmdlet cannot be used to add an object to a policy store. An object can only be added to a policy store at creation time with this cmdlet or the New-NetFirewallRule cmdlet.
Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Profile

Specifies one or more profiles to which the rule is assigned. The rule is active on the local computer only when the specified profile is currently active. This relationship is many-to-many and can be indirectly modified by the user, by changing the Profiles field on instances of firewall rules. Only one profile is applied at a time. The acceptable values for this parameter are: Any, Domain, Private, Public, or NotApplicable. The default value is Any. Separate multiple entries with a comma and do not include any spaces. Use the keyword Any to configure the profile as Private, Public, Domain in the ConfigurableServiceStore.

Type:Profile
Accepted values:Any, Domain, Private, Public, NotApplicable
Position:Named
Default value:Any
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Program

Specifies the path and file name of the program for which the rule allows traffic. This is specified as the full path to an application file. Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallApplicationFilter cmdlet for more information.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Protocol

Specifies that network packets with matching IP addresses match this rule. This parameter specifies the protocol for an IPsec rule. The acceptable values for this parameter are:

  • Protocols by number: 0-255.
  • Protocols by name: TCP, UDP, ICMPv4, or ICMPv6. If a port number is identified by using numeric values (80, 443, 8080, etc.), then this parameter must be set to TCP or UDP. The values ICMPv4 and ICMPv6 create a rule that exempts ICMP network traffic from the IPsec requirements of another rule.

The default value is Any. Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallPortFilter cmdlet for more information.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoteAddress

Specifies that network packets with matching IP addresses match this rule. This parameter value is an IPv4 or IPv6 address, subnet, range or keyword. The acceptable formats for this parameter are:

  • Single IPv4 Address: 1.2.3.4
  • Single IPv6 Address: fe80::1
  • IPv4 Subnet (by network bit count): 1.2.3.4/24
  • IPv6 Subnet (by network bit count): fe80::1/48
  • IPv4 Subnet (by network mask): 1.2.3.4/255.255.255.0
  • IPv4 Range: 1.2.3.4-1.2.3.7
  • IPv6 Range: fe80::1-fe80::9
  • Keyword: Any, LocalSubnet, DNS, DHCP, WINS, DefaultGateway, Internet, Intranet, IntranetRemoteAccess, PlayToDevice. NOTE: Keywords can be restricted to IPv4 or IPv6 by appending a 4 or 6 (for example, keyword "LocalSubnet4" means that all local IPv4 addresses are matching this rule).

Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallAddressFilter cmdlet for more information.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoteDynamicKeywordAddresses

Specifies the dynamic keyword address IDs to be used for the remote host of the traffic matched by this rule.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoteMachine

Specifies that matching IPsec rules of the indicated computer accounts are created. This parameter specifies that only network packets that are authenticated as incoming from or outgoing to a computer identified in the list of computer accounts (SID) match this rule. This parameter value is specified as an SDDL string. Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallSecurityFilter cmdlet for more information.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemotePort

Specifies that network packets with matching IP port numbers match this rule. This parameter value is the second end point of an IPsec rule. The acceptable value is a port, range, or keyword and depends on the protocol. If the protocol is TCP or UDP, then the acceptable values for this parameter are:

  • Port range: 0-65535
  • Port number: 80
  • Keyword: Any

If the protocol is ICMPv4 or ICMPv6, then the acceptable values for this parameter are:

  • An ICMP type, code pair: 0, 8
  • Type and code: 0-255
  • Keyword: Any.

If a protocol is not specified, then the acceptable values for this parameter are: Any, RPC, RPC-EPMap, or IPHTTPS. IPHTTPS is only supported on Windows Server 2012. Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallPortFilter cmdlet for more information.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoteUser

Specifies that matching IPsec rules of the indicated user accounts are created. This parameter specifies that only network packets that are authenticated as incoming from or outgoing to a user identified in the list of user accounts match this rule. This parameter value is specified as an SDDL string. Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallSecurityFilter cmdlet for more information.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Service

Specifies the short name of a Windows Server 2012 service to which the firewall rule applies. If this parameter is not specified, then network traffic generated by any program or service matches this rule. Querying for rules with this parameter can only be performed using filter objects. See the Get-NetFirewallServiceFilter cmdlet for more information.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

None

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.