How to provision devices using symmetric key enrollment groups
This article demonstrates how to securely provision multiple symmetric key devices to a single IoT Hub using an enrollment group.
Some devices may not have a certificate, TPM, or any other security feature that can be used to securely identify the device. The Device Provisioning Service includes symmetric key attestation. Symmetric key attestation can be used to identify a device based off unique information like the MAC address or a serial number.
If you can easily install a hardware security module (HSM) and a certificate, then that may be a better approach for identifying and provisioning your devices. Using an HSM will allow you to bypass updating the code deployed to all your devices, and you would not have a secret key embedded in your device images. This article assumes that neither an HSM or a certificate is a viable option. However, it is assumed that you do have some method of updating device code to use the Device Provisioning Service to provision these devices.
This article also assumes that the device update takes place in a secure environment to prevent unauthorized access to the master group key or the derived device key.
This article is oriented toward a Windows-based workstation. However, you can perform the procedures on Linux. For a Linux example, see How to provision for multitenancy.
The sample used in this article is written in C. There is also a C# device provisioning symmetric key sample available. To use this sample, download or clone the azure-iot-samples-csharp repository and follow the in-line instructions in the sample code. You can follow the instructions in this article to create a symmetric key enrollment group using the portal and to find the ID Scope and enrollment group primary and secondary keys needed to run the sample. You can also create individual enrollments using the sample.
- Completion of the Set up IoT Hub Device Provisioning Service with the Azure portal quickstart.
The following prerequisites are for a Windows development environment. For Linux or macOS, see the appropriate section in Prepare your development environment in the SDK documentation.
Latest version of Git installed.
A unique registration ID will be defined for each device based on information that identifies that device. For example, the MAC address or a serial number.
An enrollment group that uses symmetric key attestation will be created with the Device Provisioning Service. The enrollment group will include a group master key. That master key will be used to hash each unique registration ID to produce a unique device key for each device. The device will use that derived device key with its unique registration ID to attest with the Device Provisioning Service and be assigned to an IoT hub.
The device code demonstrated in this article will follow the same pattern as the Quickstart: Provision a simulated device with symmetric keys. The code will simulate a device using a sample from the Azure IoT C SDK. The simulated device will attest with an enrollment group instead of an individual enrollment as demonstrated in the quickstart.
Prepare an Azure IoT C SDK development environment
In this section, you will prepare a development environment used to build the Azure IoT C SDK.
The SDK includes the sample code for the simulated device. This simulated device will attempt provisioning during the device's boot sequence.
Download the CMake build system.
It is important that the Visual Studio prerequisites (Visual Studio and the 'Desktop development with C++' workload) are installed on your machine, before starting the
CMakeinstallation. Once the prerequisites are in place, and the download is verified, install the CMake build system.
Find the tag name for the latest release of the SDK.
Open a command prompt or Git Bash shell. Run the following commands to clone the latest release of the Azure IoT C SDK GitHub repository. Use the tag you found in the previous step as the value for the
git clone -b <release-tag> https://github.com/Azure/azure-iot-sdk-c.git cd azure-iot-sdk-c git submodule update --init
You should expect this operation to take several minutes to complete.
cmakesubdirectory in the root directory of the Git repository, and navigate to that folder. Run the following commands from the
mkdir cmake cd cmake
Run the following command, which builds a version of the SDK specific to your development client platform. A Visual Studio solution for the simulated device will be generated in the
cmake -Dhsm_type_symm_key:BOOL=ON -Duse_prov_client:BOOL=ON ..
cmakedoes not find your C++ compiler, you might get build errors while running the above command. If that happens, try running this command in the Visual Studio command prompt.
Once the build succeeds, the last few output lines will look similar to the following output:
$ cmake -Dhsm_type_symm_key:BOOL=ON -Duse_prov_client:BOOL=ON .. -- Building for: Visual Studio 15 2017 -- Selecting Windows SDK version 10.0.16299.0 to target Windows 10.0.17134. -- The C compiler identification is MSVC 19.12.25835.0 -- The CXX compiler identification is MSVC 19.12.25835.0 ... -- Configuring done -- Generating done -- Build files have been written to: E:/IoT Testing/azure-iot-sdk-c/cmake
Create a symmetric key enrollment group
Sign in to the Azure portal, and open your Device Provisioning Service instance.
Select the Manage enrollments tab, and then click the Add enrollment group button at the top of the page.
On Add Enrollment Group, enter the following information, and click the Save button.
Group name: Enter mylegacydevices.
Attestation Type: Select Symmetric Key.
Auto Generate Keys: Check this box.
Select how you want to assign devices to hubs: Select Static configuration so you can assign to a specific hub.
Select the IoT hubs this group can be assigned to: Select one of your hubs.
Once you saved your enrollment, the Primary Key and Secondary Key will be generated and added to the enrollment entry. Your symmetric key enrollment group appears as mylegacydevices under the Group Name column in the Enrollment Groups tab.
Open the enrollment and copy the value of your generated Primary Key. This key is your master group key.
Choose a unique registration ID for the device
A unique registration ID must be defined to identify each device. You can use the MAC address, serial number, or any unique information from the device.
In this example, we use a combination of a MAC address and serial number forming the following string for a registration ID.
Create unique registration IDs for each device. Valid characters are lowercase alphanumeric and dash ('-').
Derive a device key
To generate device keys, use the enrollment group master key to compute an HMAC-SHA256 of the registration ID for each device. The result is then converted into Base64 format for each device.
Your device code for each device should only include the corresponding derived device key for that device. Do not include your group master key in your device code. A compromised master key has the potential to compromise the security of all devices being authenticated with it.
The IoT extension for the Azure CLI provides the
compute-device-key command for generating derived device keys. This command can be used from a Windows-based or Linux systems, in PowerShell or a Bash shell.
Replace the value of
--key argument with the Primary Key from your enrollment group.
Replace the value of
--registration-id argument with your registration ID.
az iot dps compute-device-key --key 8isrFI1sGsIlvvFSSFRiMfCNzv21fjbE/+ah/lSh3lF8e2YG1Te7w1KpZhJFFXJrqYKi9yegxkqIChbqOS9Egw== --registration-id sn-007-888-abc-mac-a1-b2-c3-d4-e5-f6
Each device uses its derived device key and unique registration ID to perform symmetric key attestation with the enrollment group during provisioning.
Create a device image to provision
In this section, you will update a provisioning sample named prov_dev_client_sample located in the Azure IoT C SDK you set up earlier.
This sample code simulates a device boot sequence that sends the provisioning request to your Device Provisioning Service instance. The boot sequence will cause the device to be recognized and assigned to the IoT hub you configured on the enrollment group. This would be completed for each device that would be provisioned using the enrollment group.
In the Azure portal, select the Overview tab for your Device Provisioning service and note down the ID Scope value.
In Visual Studio, open the azure_iot_sdks.sln solution file that was generated by running CMake earlier. The solution file should be in the following location:
In Visual Studio's Solution Explorer window, navigate to the Provision_Samples folder. Expand the sample project named prov_dev_client_sample. Expand Source Files, and open prov_dev_client_sample.c.
id_scopeconstant, and replace the value with your ID Scope value that you copied earlier.
static const char* id_scope = "0ne00002193";
Find the definition for the
main()function in the same file. Make sure the
hsm_typevariable is set to
SECURE_DEVICE_TYPE_SYMMETRIC_KEYas shown below:
SECURE_DEVICE_TYPE hsm_type; //hsm_type = SECURE_DEVICE_TYPE_TPM; //hsm_type = SECURE_DEVICE_TYPE_X509; hsm_type = SECURE_DEVICE_TYPE_SYMMETRIC_KEY;
Find the call to
prov_dev_set_symmetric_key_info()in prov_dev_client_sample.c which is commented out.
// Set the symmetric key if using they auth type //prov_dev_set_symmetric_key_info("<symm_registration_id>", "<symmetric_Key>");
Uncomment the function call, and replace the placeholder values (including the angle brackets) with the unique registration ID for your device and the derived device key you generated.
// Set the symmetric key if using they auth type prov_dev_set_symmetric_key_info("sn-007-888-abc-mac-a1-b2-c3-d4-e5-f6", "Jsm0lyGpjaVYVP2g3FnmnmG9dI/9qU24wNoykUmermc=");
Save the file.
Right-click the prov_dev_client_sample project and select Set as Startup Project.
On the Visual Studio menu, select Debug > Start without debugging to run the solution. In the prompt to rebuild the project, click Yes, to rebuild the project before running.
The following output is an example of the simulated device successfully booting up, and connecting to the provisioning Service instance to be assigned to an IoT hub:
Provisioning API Version: 1.2.8 Registering Device Provisioning Status: PROV_DEVICE_REG_STATUS_CONNECTED Provisioning Status: PROV_DEVICE_REG_STATUS_ASSIGNING Provisioning Status: PROV_DEVICE_REG_STATUS_ASSIGNING Registration Information received from service: test-docs-hub.azure-devices.net, deviceId: sn-007-888-abc-mac-a1-b2-c3-d4-e5-f6 Press enter key to exit:
In the portal, navigate to the IoT hub your simulated device was assigned to and click the IoT Devices tab. On successful provisioning of the simulated to the hub, its device ID appears on the IoT Devices blade, with STATUS as enabled. You might need to click the Refresh button at the top.
Be aware that this leaves the derived device key included as part of the image for each device, which is not a recommended security best practice. This is one reason why security and ease-of-use are often tradeoffs. You must fully review the security of your devices based on your own requirements.
- To learn more about Reprovisioning, see
- To learn more about Deprovisioning, see