Freigeben über


Erstellen von Threads und Übergeben von Daten zur Startzeit

Wenn ein Betriebssystemprozess erstellt wird, führt das Betriebssystem einen Thread ein, um Code in diesem Prozess auszuführen, einschließlich einer etwaigen ursprünglichen Anwendungsdomäne. Ab diesem Punkt können Anwendungsdomänen erstellt und gelöscht werden, ohne dass notwendigerweise Betriebssystemthreads erstellt oder zerstört werden. Wenn der ausgeführte Code verwalteter Code ist, kann ein Thread -Objekt für die Threadausführung in der aktuellen Anwendungsdomäne durch Abrufen der statischen CurrentThread-Eigenschaft des Typs Thread abgerufen werden. Dieses Thema beschreibt die Threaderstellung und erläutert Alternativen für die Übergabe von Daten an die Threadprozedur.

Erstellen eines Threads

Beim Erstellen eines neuen Thread-Objekts wird ein neuer verwalteter Thread erstellt. Die Thread-Klasse verfügt über Konstruktoren, die einen ThreadStart- oder ParameterizedThreadStart-annehmen; der Delegat umschließt die Methode, die von dem neuen Thread aufgerufen wird, wenn Sie die Start-Methode aufrufen. Bei mehrmaligem Aufrufen von Start wird eine ThreadStateException ausgelöst.

Die Rückgabe der Start-Methode erfolgt sofort, oft bevor der neue Thread tatsächlich gestartet wurde. Sie können mit den Eigenschaften ThreadState und IsAlive jederzeit den Status des Threads ermitteln, aber diese Eigenschaften sollten nie zum Synchronisieren der Aktivitäten von Threads verwendet werden.

Hinweis

Sobald ein Thread gestartet wird, ist es nicht notwendig, einen Verweis auf das Thread-Objekt beizubehalten. Der Thread wird weiterhin ausgeführt, bis die Threadprozedur endet.

Das folgende Codebeispiel erstellt zwei neue Threads, um Instanz- und statische Methode auf einem anderen Objekt aufzurufen.

using namespace System;
using namespace System::Threading;

public ref class ServerClass
{
public:
    // The method that will be called when the thread is started.
    void InstanceMethod()
    {
        Console::WriteLine(
            "ServerClass.InstanceMethod is running on another thread.");

        // Pause for a moment to provide a delay to make
        // threads more apparent.
        Thread::Sleep(3000);
        Console::WriteLine(
            "The instance method called by the worker thread has ended.");
    }

    static void StaticMethod()
    {
        Console::WriteLine(
            "ServerClass.StaticMethod is running on another thread.");

        // Pause for a moment to provide a delay to make
        // threads more apparent.
        Thread::Sleep(5000);
        Console::WriteLine(
            "The static method called by the worker thread has ended.");
    }
};

public ref class Simple
{
public:
    static void Main()
    {
        ServerClass^ serverObject = gcnew ServerClass();

        // Create the thread object, passing in the
        // serverObject.InstanceMethod method using a
        // ThreadStart delegate.
        Thread^ InstanceCaller = gcnew Thread(
            gcnew ThreadStart(serverObject, &ServerClass::InstanceMethod));

        // Start the thread.
        InstanceCaller->Start();

        Console::WriteLine("The Main() thread calls this after "
            + "starting the new InstanceCaller thread.");

        // Create the thread object, passing in the
        // serverObject.StaticMethod method using a
        // ThreadStart delegate.
        Thread^ StaticCaller = gcnew Thread(
            gcnew ThreadStart(&ServerClass::StaticMethod));

        // Start the thread.
        StaticCaller->Start();

        Console::WriteLine("The Main() thread calls this after "
            + "starting the new StaticCaller thread.");
    }
};

int main()
{
    Simple::Main();
}
// The example displays output like the following:
//       The Main() thread calls this after starting the new InstanceCaller thread.
//       The Main() thread calls this after starting the new StaticCaller thread.
//       ServerClass.StaticMethod is running on another thread.
//       ServerClass.InstanceMethod is running on another thread.
//       The instance method called by the worker thread has ended.
//       The static method called by the worker thread has ended.
using System;
using System.Threading;

public class ServerClass
{
    // The method that will be called when the thread is started.
    public void InstanceMethod()
    {
        Console.WriteLine(
            "ServerClass.InstanceMethod is running on another thread.");

        // Pause for a moment to provide a delay to make
        // threads more apparent.
        Thread.Sleep(3000);
        Console.WriteLine(
            "The instance method called by the worker thread has ended.");
    }

    public static void StaticMethod()
    {
        Console.WriteLine(
            "ServerClass.StaticMethod is running on another thread.");

        // Pause for a moment to provide a delay to make
        // threads more apparent.
        Thread.Sleep(5000);
        Console.WriteLine(
            "The static method called by the worker thread has ended.");
    }
}

public class Simple
{
    public static void Main()
    {
        ServerClass serverObject = new ServerClass();

        // Create the thread object, passing in the
        // serverObject.InstanceMethod method using a
        // ThreadStart delegate.
        Thread InstanceCaller = new Thread(
            new ThreadStart(serverObject.InstanceMethod));

        // Start the thread.
        InstanceCaller.Start();

        Console.WriteLine("The Main() thread calls this after "
            + "starting the new InstanceCaller thread.");

        // Create the thread object, passing in the
        // serverObject.StaticMethod method using a
        // ThreadStart delegate.
        Thread StaticCaller = new Thread(
            new ThreadStart(ServerClass.StaticMethod));

        // Start the thread.
        StaticCaller.Start();

        Console.WriteLine("The Main() thread calls this after "
            + "starting the new StaticCaller thread.");
    }
}
// The example displays the output like the following:
//    The Main() thread calls this after starting the new InstanceCaller thread.
//    The Main() thread calls this after starting the new StaticCaller thread.
//    ServerClass.StaticMethod is running on another thread.
//    ServerClass.InstanceMethod is running on another thread.
//    The instance method called by the worker thread has ended.
//    The static method called by the worker thread has ended.
Imports System.Threading

Public class ServerClass
    ' The method that will be called when the thread is started.
    Public Sub InstanceMethod()
        Console.WriteLine(
            "ServerClass.InstanceMethod is running on another thread.")

        ' Pause for a moment to provide a delay to make
        ' threads more apparent.
        Thread.Sleep(3000)
        Console.WriteLine(
            "The instance method called by the worker thread has ended.")
    End Sub

    Public Shared Sub SharedMethod()
        Console.WriteLine(
            "ServerClass.SharedMethod is running on another thread.")

        ' Pause for a moment to provide a delay to make
        ' threads more apparent.
        Thread.Sleep(5000)
        Console.WriteLine(
            "The Shared method called by the worker thread has ended.")
    End Sub
End Class

Public class Simple
    Public Shared Sub Main()
        Dim serverObject As New ServerClass()

        ' Create the thread object, passing in the
        ' serverObject.InstanceMethod method using a
        ' ThreadStart delegate.
        Dim InstanceCaller As New Thread(AddressOf serverObject.InstanceMethod)

        ' Start the thread.
        InstanceCaller.Start()

        Console.WriteLine("The Main() thread calls this after " _
            + "starting the new InstanceCaller thread.")

        ' Create the thread object, passing in the
        ' serverObject.SharedMethod method using a
        ' ThreadStart delegate.
        Dim SharedCaller As New Thread( _
            New ThreadStart(AddressOf ServerClass.SharedMethod))

        ' Start the thread.
        SharedCaller.Start()

        Console.WriteLine("The Main() thread calls this after " _
            + "starting the new SharedCaller thread.")
    End Sub
End Class
' The example displays output like the following:
'    The Main() thread calls this after starting the new InstanceCaller thread.
'    The Main() thread calls this after starting the new StaticCaller thread.
'    ServerClass.StaticMethod is running on another thread.
'    ServerClass.InstanceMethod is running on another thread.
'    The instance method called by the worker thread has ended.
'    The static method called by the worker thread has ended.

Übergeben von Daten an Threads

Der ParameterizedThreadStart-Delegat bietet eine einfache Möglichkeit, ein Objekt mit Daten an einen Thread zu übergeben, wenn Sie Thread.Start(Object) aufrufen. Ein Codebeispiel finden Sie unter ParameterizedThreadStart.

Die Verwendung des ParameterizedThreadStart-Delegaten ist keine typsichere Möglichkeit zur Übergabe von Daten, da die Thread.Start(Object)-Methode jedes Objekt akzeptiert. Eine Alternative ist, die Threadprozedur und die Daten in eine Hilfsklasse zu kapseln und die Threadprozedur mit dem ThreadStart-Delegaten auszuführen. Diese Prozedur wird im folgenden Beispiel veranschaulicht:

using namespace System;
using namespace System::Threading;

// The ThreadWithState class contains the information needed for
// a task, and the method that executes the task.
//
public ref class ThreadWithState
{
private:
    // State information used in the task.
    String^ boilerplate;
    int numberValue;

    // The constructor obtains the state information.
public:
    ThreadWithState(String^ text, int number)
    {
        boilerplate = text;
        numberValue = number;
    }

    // The thread procedure performs the task, such as formatting
    // and printing a document.
    void ThreadProc()
    {
        Console::WriteLine(boilerplate, numberValue);
    }
};

// Entry point for the example.
//
public ref class Example
{
public:
    static void Main()
    {
        // Supply the state information required by the task.
        ThreadWithState^ tws = gcnew ThreadWithState(
            "This report displays the number {0}.", 42);

        // Create a thread to execute the task, and then
        // start the thread.
        Thread^ t = gcnew Thread(gcnew ThreadStart(tws, &ThreadWithState::ThreadProc));
        t->Start();
        Console::WriteLine("Main thread does some work, then waits.");
        t->Join();
        Console::WriteLine(
            "Independent task has completed; main thread ends.");
    }
};

int main()
{
    Example::Main();
}
// This example displays the following output:
//       Main thread does some work, then waits.
//       This report displays the number 42.
//       Independent task has completed; main thread ends.
using System;
using System.Threading;

// The ThreadWithState class contains the information needed for
// a task, and the method that executes the task.
//
public class ThreadWithState
{
    // State information used in the task.
    private string boilerplate;
    private int numberValue;

    // The constructor obtains the state information.
    public ThreadWithState(string text, int number)
    {
        boilerplate = text;
        numberValue = number;
    }

    // The thread procedure performs the task, such as formatting
    // and printing a document.
    public void ThreadProc()
    {
        Console.WriteLine(boilerplate, numberValue);
    }
}

// Entry point for the example.
//
public class Example
{
    public static void Main()
    {
        // Supply the state information required by the task.
        ThreadWithState tws = new ThreadWithState(
            "This report displays the number {0}.", 42);

        // Create a thread to execute the task, and then
        // start the thread.
        Thread t = new Thread(new ThreadStart(tws.ThreadProc));
        t.Start();
        Console.WriteLine("Main thread does some work, then waits.");
        t.Join();
        Console.WriteLine(
            "Independent task has completed; main thread ends.");
    }
}
// The example displays the following output:
//       Main thread does some work, then waits.
//       This report displays the number 42.
//       Independent task has completed; main thread ends.
Imports System.Threading

' The ThreadWithState class contains the information needed for
' a task, and the method that executes the task.
Public Class ThreadWithState
    ' State information used in the task.
    Private boilerplate As String
    Private numberValue As Integer

    ' The constructor obtains the state information.
    Public Sub New(text As String, number As Integer)
        boilerplate = text
        numberValue = number
    End Sub

    ' The thread procedure performs the task, such as formatting
    ' and printing a document.
    Public Sub ThreadProc()
        Console.WriteLine(boilerplate, numberValue)
    End Sub
End Class

' Entry point for the example.
'
Public Class Example
    Public Shared Sub Main()
        ' Supply the state information required by the task.
        Dim tws As New ThreadWithState( _
            "This report displays the number {0}.", 42)

        ' Create a thread to execute the task, and then
        ' start the thread.
        Dim t As New Thread(New ThreadStart(AddressOf tws.ThreadProc))
        t.Start()
        Console.WriteLine("Main thread does some work, then waits.")
        t.Join()
        Console.WriteLine( _
            "Independent task has completed main thread ends.")
    End Sub
End Class
' The example displays the following output:
'       Main thread does some work, then waits.
'       This report displays the number 42.
'       Independent task has completed; main thread ends.

Weder der Delegat ThreadStart noch der Delegat ParameterizedThreadStart haben einen Rückgabewert, da es keinen Ort gibt, an den die Daten aus einem asynchronen Aufruf zurückgegeben werden können. Zum Abrufen der Ergebnisse einer Threadmethode können Sie wie im zweiten Codebeispiel gezeigt eine Rückrufmethode verwenden.

Abrufen von Daten aus Threads mit Rückrufmethoden

Das folgende Beispiel veranschaulicht eine Rückrufmethode, die Daten von einem anderen Thread abruft. Der Konstruktor für die Klasse, die die Daten enthält, und auch die Threadmethode akzeptieren einen Delegaten, der die Rückrufmethode darstellt; bevor die Threadmethode endet, ruft sie den Rückrufdelegaten auf.

using namespace System;
using namespace System::Threading;

// Delegate that defines the signature for the callback method.
//
public delegate void ExampleCallback(int lineCount);

// The ThreadWithState class contains the information needed for
// a task, the method that executes the task, and a delegate
// to call when the task is complete.
//
public ref class ThreadWithState
{
private:
    // State information used in the task.
    String^ boilerplate;
    int numberValue;

    // Delegate used to execute the callback method when the
    // task is complete.
    ExampleCallback^ callback;

public:
    // The constructor obtains the state information and the
    // callback delegate.
    ThreadWithState(String^ text, int number,
        ExampleCallback^ callbackDelegate)
    {
        boilerplate = text;
        numberValue = number;
        callback = callbackDelegate;
    }

    // The thread procedure performs the task, such as
    // formatting and printing a document, and then invokes
    // the callback delegate with the number of lines printed.
    void ThreadProc()
    {
        Console::WriteLine(boilerplate, numberValue);
        if (callback != nullptr)
        {
            callback(1);
        }
    }
};

// Entry point for the example.
//
public ref class Example
{
public:
    static void Main()
    {
        // Supply the state information required by the task.
        ThreadWithState^ tws = gcnew ThreadWithState(
            "This report displays the number {0}.",
            42,
            gcnew ExampleCallback(&Example::ResultCallback)
        );

        Thread^ t = gcnew Thread(gcnew ThreadStart(tws, &ThreadWithState::ThreadProc));
        t->Start();
        Console::WriteLine("Main thread does some work, then waits.");
        t->Join();
        Console::WriteLine(
            "Independent task has completed; main thread ends.");
    }

    // The callback method must match the signature of the
    // callback delegate.
    //
    static void ResultCallback(int lineCount)
    {
        Console::WriteLine(
            "Independent task printed {0} lines.", lineCount);
    }
};

int main()
{
    Example::Main();
}
// The example displays the following output:
//       Main thread does some work, then waits.
//       This report displays the number 42.
//       Independent task printed 1 lines.
//       Independent task has completed; main thread ends.
using System;
using System.Threading;

// The ThreadWithState class contains the information needed for
// a task, the method that executes the task, and a delegate
// to call when the task is complete.
//
public class ThreadWithState
{
    // State information used in the task.
    private string boilerplate;
    private int numberValue;

    // Delegate used to execute the callback method when the
    // task is complete.
    private ExampleCallback callback;

    // The constructor obtains the state information and the
    // callback delegate.
    public ThreadWithState(string text, int number,
        ExampleCallback callbackDelegate)
    {
        boilerplate = text;
        numberValue = number;
        callback = callbackDelegate;
    }

    // The thread procedure performs the task, such as
    // formatting and printing a document, and then invokes
    // the callback delegate with the number of lines printed.
    public void ThreadProc()
    {
        Console.WriteLine(boilerplate, numberValue);
        if (callback != null)
            callback(1);
    }
}

// Delegate that defines the signature for the callback method.
//
public delegate void ExampleCallback(int lineCount);

// Entry point for the example.
//
public class Example
{
    public static void Main()
    {
        // Supply the state information required by the task.
        ThreadWithState tws = new ThreadWithState(
            "This report displays the number {0}.",
            42,
            new ExampleCallback(ResultCallback)
        );

        Thread t = new Thread(new ThreadStart(tws.ThreadProc));
        t.Start();
        Console.WriteLine("Main thread does some work, then waits.");
        t.Join();
        Console.WriteLine(
            "Independent task has completed; main thread ends.");
    }

    // The callback method must match the signature of the
    // callback delegate.
    //
    public static void ResultCallback(int lineCount)
    {
        Console.WriteLine(
            "Independent task printed {0} lines.", lineCount);
    }
}
// The example displays the following output:
//       Main thread does some work, then waits.
//       This report displays the number 42.
//       Independent task printed 1 lines.
//       Independent task has completed; main thread ends.
Imports System.Threading

' The ThreadWithState class contains the information needed for
' a task, the method that executes the task, and a delegate
' to call when the task is complete.
Public Class ThreadWithState
    ' State information used in the task.
    Private boilerplate As String
    Private numberValue As Integer

    ' Delegate used to execute the callback method when the
    ' task is complete.
    Private callback As ExampleCallback

    ' The constructor obtains the state information and the
    ' callback delegate.
    Public Sub New(text As String, number As Integer, _
        callbackDelegate As ExampleCallback)
        boilerplate = text
        numberValue = number
        callback = callbackDelegate
    End Sub

    ' The thread procedure performs the task, such as
    ' formatting and printing a document, and then invokes
    ' the callback delegate with the number of lines printed.
    Public Sub ThreadProc()
        Console.WriteLine(boilerplate, numberValue)
        If Not (callback Is Nothing) Then
            callback(1)
        End If
    End Sub
End Class

' Delegate that defines the signature for the callback method.
'
Public Delegate Sub ExampleCallback(lineCount As Integer)

Public Class Example
    Public Shared Sub Main()
        ' Supply the state information required by the task.
        Dim tws As New ThreadWithState( _
            "This report displays the number {0}.", _
            42, _
            AddressOf ResultCallback)

        Dim t As New Thread(AddressOf tws.ThreadProc)
        t.Start()
        Console.WriteLine("Main thread does some work, then waits.")
        t.Join()
        Console.WriteLine( _
            "Independent task has completed; main thread ends.")
    End Sub

    Public Shared Sub ResultCallback(lineCount As Integer)
        Console.WriteLine( _
            "Independent task printed {0} lines.", lineCount)
    End Sub
End Class
' The example displays the following output:
'       Main thread does some work, then waits.
'       This report displays the number 42.
'       Independent task printed 1 lines.
'       Independent task has completed; main thread ends.

Siehe auch