Array.GetValue Methode

Definition

Ruft den Wert des angegebenen Elements im aktuellen Array ab.Gets the value of the specified element in the current Array.

Überlädt

GetValue(Int64, Int64, Int64)

Ruft den Wert an der angegebenen Position des dreidimensionalen Array ab.Gets the value at the specified position in the three-dimensional Array. Die Indizes werden als 64-Bit-Ganzzahlen angegeben.The indexes are specified as 64-bit integers.

GetValue(Int32, Int32, Int32)

Ruft den Wert an der angegebenen Position des dreidimensionalen Array ab.Gets the value at the specified position in the three-dimensional Array. Die Indizes werden als 32-Bit-Ganzzahlen angegeben.The indexes are specified as 32-bit integers.

GetValue(Int64, Int64)

Ruft den Wert an der angegebenen Position des zweidimensionalen Array ab.Gets the value at the specified position in the two-dimensional Array. Die Indizes werden als 64-Bit-Ganzzahlen angegeben.The indexes are specified as 64-bit integers.

GetValue(Int32, Int32)

Ruft den Wert an der angegebenen Position des zweidimensionalen Array ab.Gets the value at the specified position in the two-dimensional Array. Die Indizes werden als 32-Bit-Ganzzahlen angegeben.The indexes are specified as 32-bit integers.

GetValue(Int32)

Ruft den Wert an der angegebenen Position des eindimensionalen Array ab.Gets the value at the specified position in the one-dimensional Array. Der Index wird als 32-Bit-Ganzzahl angegeben.The index is specified as a 32-bit integer.

GetValue(Int64)

Ruft den Wert an der angegebenen Position des eindimensionalen Array ab.Gets the value at the specified position in the one-dimensional Array. Der Index wird als 64-Bit-Ganzzahl angegeben.The index is specified as a 64-bit integer.

GetValue(Int32[])

Ruft den Wert an der angegebenen Position des mehrdimensionalen Array ab.Gets the value at the specified position in the multidimensional Array. Die Indizes werden als ein Array von 32-Bit-Ganzzahlen angegeben.The indexes are specified as an array of 32-bit integers.

GetValue(Int64[])

Ruft den Wert an der angegebenen Position des mehrdimensionalen Array ab.Gets the value at the specified position in the multidimensional Array. Die Indizes werden als ein Array von 64-Bit-Ganzzahlen angegeben.The indexes are specified as an array of 64-bit integers.

GetValue(Int64, Int64, Int64)

Ruft den Wert an der angegebenen Position des dreidimensionalen Array ab.Gets the value at the specified position in the three-dimensional Array. Die Indizes werden als 64-Bit-Ganzzahlen angegeben.The indexes are specified as 64-bit integers.

public:
 System::Object ^ GetValue(long index1, long index2, long index3);
public object GetValue (long index1, long index2, long index3);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (long index1, long index2, long index3);
member this.GetValue : int64 * int64 * int64 -> obj
[<System.Runtime.InteropServices.ComVisible(false)>]
member this.GetValue : int64 * int64 * int64 -> obj
Public Function GetValue (index1 As Long, index2 As Long, index3 As Long) As Object

Parameter

index1
Int64

Eine 64-Bit-Ganzzahl, die den Index für die erste Dimension des abzurufenden Array-Elements darstellt.A 64-bit integer that represents the first-dimension index of the Array element to get.

index2
Int64

Eine 64-Bit-Ganzzahl, die den Index für die zweite Dimension des abzurufenden Array-Elements darstellt.A 64-bit integer that represents the second-dimension index of the Array element to get.

index3
Int64

Eine 64-Bit-Ganzzahl, die den Index für die dritte Dimension des abzurufenden Array-Elements darstellt.A 64-bit integer that represents the third-dimension index of the Array element to get.

Gibt zurück

Object

Der Wert an der angegebenen Position des dreidimensionalen Array.The value at the specified position in the three-dimensional Array.

Attribute

Ausnahmen

Das aktuelle Array verfügt nicht über genau drei Dimensionen.The current Array does not have exactly three dimensions.

Entweder index1, index2 oder index3 liegt außerhalb des Bereichs gültiger Indizes für die entsprechende Dimension des aktuellen Array.index1 or index2 or index3 is outside the range of valid indexes for the corresponding dimension of the current Array.

Beispiele

Im folgenden Codebeispiel wird veranschaulicht, wie ein bestimmter Wert in einem eindimensionalen oder mehrdimensionalen Array festgelegt und erhalten wird.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {

      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );

      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );

      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );

      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );
   }
}


/*
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Hinweise

Die GetLowerBound -Methode und die- GetUpperBound Methode können bestimmen, ob ein Index außerhalb des gültigen Bereichs liegt.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Diese Methode ist ein O (1)-Vorgang.This method is an O(1) operation.

Weitere Informationen

GetValue(Int32, Int32, Int32)

Ruft den Wert an der angegebenen Position des dreidimensionalen Array ab.Gets the value at the specified position in the three-dimensional Array. Die Indizes werden als 32-Bit-Ganzzahlen angegeben.The indexes are specified as 32-bit integers.

public:
 System::Object ^ GetValue(int index1, int index2, int index3);
public object GetValue (int index1, int index2, int index3);
member this.GetValue : int * int * int -> obj
Public Function GetValue (index1 As Integer, index2 As Integer, index3 As Integer) As Object

Parameter

index1
Int32

Eine 32-Bit-Ganzzahl, die den Index für die erste Dimension des abzurufenden Array-Elements darstellt.A 32-bit integer that represents the first-dimension index of the Array element to get.

index2
Int32

Eine 32-Bit-Ganzzahl, die den Index für die zweite Dimension des abzurufenden Array-Elements darstellt.A 32-bit integer that represents the second-dimension index of the Array element to get.

index3
Int32

Eine 32-Bit-Ganzzahl, die den Index für die dritte Dimension des abzurufenden Array-Elements darstellt.A 32-bit integer that represents the third-dimension index of the Array element to get.

Gibt zurück

Object

Der Wert an der angegebenen Position des dreidimensionalen Array.The value at the specified position in the three-dimensional Array.

Ausnahmen

Das aktuelle Array verfügt nicht über genau drei Dimensionen.The current Array does not have exactly three dimensions.

Entweder index1, index2 oder index3 liegt außerhalb des Bereichs gültiger Indizes für die entsprechende Dimension des aktuellen Array.index1 or index2 or index3 is outside the range of valid indexes for the corresponding dimension of the current Array.

Beispiele

Im folgenden Codebeispiel wird veranschaulicht, wie ein bestimmter Wert in einem eindimensionalen oder mehrdimensionalen Array festgelegt und erhalten wird.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {

      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );

      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );

      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );

      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );
   }
}


/*
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Hinweise

Die GetLowerBound -Methode und die- GetUpperBound Methode können bestimmen, ob ein Index außerhalb des gültigen Bereichs liegt.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Diese Methode ist ein O (1)-Vorgang.This method is an O(1) operation.

Weitere Informationen

GetValue(Int64, Int64)

Ruft den Wert an der angegebenen Position des zweidimensionalen Array ab.Gets the value at the specified position in the two-dimensional Array. Die Indizes werden als 64-Bit-Ganzzahlen angegeben.The indexes are specified as 64-bit integers.

public:
 System::Object ^ GetValue(long index1, long index2);
public object GetValue (long index1, long index2);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (long index1, long index2);
member this.GetValue : int64 * int64 -> obj
[<System.Runtime.InteropServices.ComVisible(false)>]
member this.GetValue : int64 * int64 -> obj
Public Function GetValue (index1 As Long, index2 As Long) As Object

Parameter

index1
Int64

Eine 64-Bit-Ganzzahl, die den Index für die erste Dimension des abzurufenden Array-Elements darstellt.A 64-bit integer that represents the first-dimension index of the Array element to get.

index2
Int64

Eine 64-Bit-Ganzzahl, die den Index für die zweite Dimension des abzurufenden Array-Elements darstellt.A 64-bit integer that represents the second-dimension index of the Array element to get.

Gibt zurück

Object

Der Wert an der angegebenen Position des zweidimensionalen Array.The value at the specified position in the two-dimensional Array.

Attribute

Ausnahmen

Das aktuelle Array verfügt nicht über genau zwei Dimensionen.The current Array does not have exactly two dimensions.

Entweder index1 oder index2 liegt außerhalb des Bereichs der gültigen Indizes für die entsprechende Dimension des aktuellen Array.Either index1 or index2 is outside the range of valid indexes for the corresponding dimension of the current Array.

Beispiele

Im folgenden Codebeispiel wird veranschaulicht, wie ein bestimmter Wert in einem eindimensionalen oder mehrdimensionalen Array festgelegt und erhalten wird.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {

      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );

      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );

      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );

      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );
   }
}


/*
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Hinweise

Die GetLowerBound -Methode und die- GetUpperBound Methode können bestimmen, ob ein Index außerhalb des gültigen Bereichs liegt.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Diese Methode ist ein O (1)-Vorgang.This method is an O(1) operation.

Weitere Informationen

GetValue(Int32, Int32)

Ruft den Wert an der angegebenen Position des zweidimensionalen Array ab.Gets the value at the specified position in the two-dimensional Array. Die Indizes werden als 32-Bit-Ganzzahlen angegeben.The indexes are specified as 32-bit integers.

public:
 System::Object ^ GetValue(int index1, int index2);
public object GetValue (int index1, int index2);
member this.GetValue : int * int -> obj
Public Function GetValue (index1 As Integer, index2 As Integer) As Object

Parameter

index1
Int32

Eine 32-Bit-Ganzzahl, die den Index für die erste Dimension des abzurufenden Array-Elements darstellt.A 32-bit integer that represents the first-dimension index of the Array element to get.

index2
Int32

Eine 32-Bit-Ganzzahl, die den Index für die zweite Dimension des abzurufenden Array-Elements darstellt.A 32-bit integer that represents the second-dimension index of the Array element to get.

Gibt zurück

Object

Der Wert an der angegebenen Position des zweidimensionalen Array.The value at the specified position in the two-dimensional Array.

Ausnahmen

Das aktuelle Array verfügt nicht über genau zwei Dimensionen.The current Array does not have exactly two dimensions.

Entweder index1 oder index2 liegt außerhalb des Bereichs der gültigen Indizes für die entsprechende Dimension des aktuellen Array.Either index1 or index2 is outside the range of valid indexes for the corresponding dimension of the current Array.

Beispiele

Im folgenden Codebeispiel wird veranschaulicht, wie ein bestimmter Wert in einem eindimensionalen oder mehrdimensionalen Array festgelegt und erhalten wird.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {

      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );

      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );

      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );

      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );
   }
}


/*
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Hinweise

Die GetLowerBound -Methode und die- GetUpperBound Methode können bestimmen, ob ein Index außerhalb des gültigen Bereichs liegt.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Diese Methode ist ein O (1)-Vorgang.This method is an O(1) operation.

Weitere Informationen

GetValue(Int32)

Ruft den Wert an der angegebenen Position des eindimensionalen Array ab.Gets the value at the specified position in the one-dimensional Array. Der Index wird als 32-Bit-Ganzzahl angegeben.The index is specified as a 32-bit integer.

public:
 System::Object ^ GetValue(int index);
public object GetValue (int index);
member this.GetValue : int -> obj
Public Function GetValue (index As Integer) As Object

Parameter

index
Int32

Eine 32-Bit-Ganzzahl, die die Position des abzurufenden Array-Elements darstellt.A 32-bit integer that represents the position of the Array element to get.

Gibt zurück

Object

Der Wert an der angegebenen Position des eindimensionalen Array.The value at the specified position in the one-dimensional Array.

Ausnahmen

Das aktuelle Array verfügt nicht über genau eine Dimension.The current Array does not have exactly one dimension.

index liegt außerhalb des Bereichs der gültigen Indizes für das aktuelle Array.index is outside the range of valid indexes for the current Array.

Beispiele

Im folgenden Codebeispiel wird veranschaulicht, wie ein bestimmter Wert in einem eindimensionalen oder mehrdimensionalen Array festgelegt und erhalten wird.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {

      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );

      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );

      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );

      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );
   }
}


/*
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Hinweise

Die GetLowerBound -Methode und die- GetUpperBound Methode können bestimmen, ob der Wert von index außerhalb des gültigen Bereichs liegt.The GetLowerBound and GetUpperBound methods can determine whether the value of index is out of bounds.

Diese Methode ist ein O (1)-Vorgang.This method is an O(1) operation.

Weitere Informationen

GetValue(Int64)

Ruft den Wert an der angegebenen Position des eindimensionalen Array ab.Gets the value at the specified position in the one-dimensional Array. Der Index wird als 64-Bit-Ganzzahl angegeben.The index is specified as a 64-bit integer.

public:
 System::Object ^ GetValue(long index);
public object GetValue (long index);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (long index);
member this.GetValue : int64 -> obj
[<System.Runtime.InteropServices.ComVisible(false)>]
member this.GetValue : int64 -> obj
Public Function GetValue (index As Long) As Object

Parameter

index
Int64

Eine 64-Bit-Ganzzahl, die die Position des abzurufenden Array-Elements darstellt.A 64-bit integer that represents the position of the Array element to get.

Gibt zurück

Object

Der Wert an der angegebenen Position des eindimensionalen Array.The value at the specified position in the one-dimensional Array.

Attribute

Ausnahmen

Das aktuelle Array verfügt nicht über genau eine Dimension.The current Array does not have exactly one dimension.

index liegt außerhalb des Bereichs der gültigen Indizes für das aktuelle Array.index is outside the range of valid indexes for the current Array.

Beispiele

Im folgenden Codebeispiel wird veranschaulicht, wie ein bestimmter Wert in einem eindimensionalen oder mehrdimensionalen Array festgelegt und erhalten wird.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {

      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );

      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );

      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );

      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );
   }
}


/*
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Hinweise

Die GetLowerBound -Methode und die- GetUpperBound Methode können bestimmen, ob der Wert von index außerhalb des gültigen Bereichs liegt.The GetLowerBound and GetUpperBound methods can determine whether the value of index is out of bounds.

Diese Methode ist ein O (1)-Vorgang.This method is an O(1) operation.

Weitere Informationen

GetValue(Int32[])

Ruft den Wert an der angegebenen Position des mehrdimensionalen Array ab.Gets the value at the specified position in the multidimensional Array. Die Indizes werden als ein Array von 32-Bit-Ganzzahlen angegeben.The indexes are specified as an array of 32-bit integers.

public:
 System::Object ^ GetValue(... cli::array <int> ^ indices);
public object GetValue (params int[] indices);
public object? GetValue (params int[] indices);
member this.GetValue : int[] -> obj
Public Function GetValue (ParamArray indices As Integer()) As Object

Parameter

indices
Int32[]

Ein eindimensionales Array von 32-Bit-Ganzzahlen, die die Indizes darstellen, die die Position des abzurufenden Array-Elements angeben.A one-dimensional array of 32-bit integers that represent the indexes specifying the position of the Array element to get.

Gibt zurück

Object

Der Wert an der angegebenen Position des mehrdimensionalen Array.The value at the specified position in the multidimensional Array.

Ausnahmen

indices ist null.indices is null.

Die Anzahl von Dimensionen im aktuellen Array ist nicht mit der Anzahl von Elementen in indices identisch.The number of dimensions in the current Array is not equal to the number of elements in indices.

Jedes Element in indices liegt außerhalb des Bereichs der gültigen Indizes für die entsprechende Dimension des aktuellen Array.Any element in indices is outside the range of valid indexes for the corresponding dimension of the current Array.

Beispiele

Im folgenden Codebeispiel wird veranschaulicht, wie ein bestimmter Wert in einem eindimensionalen oder mehrdimensionalen Array festgelegt und erhalten wird.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {

      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );

      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );

      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );

      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );
   }
}


/*
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Hinweise

Die Anzahl der Elemente in indices muss der Anzahl der Dimensionen in der entsprechen Array .The number of elements in indices must equal the number of dimensions in the Array. Alle Elemente im indices Array müssen kollektiv die Position des gewünschten Elements im mehrdimensionalen angeben Array .All elements in the indices array must collectively specify the position of the desired element in the multidimensional Array.

Die GetLowerBound -Methode und die- GetUpperBound Methode können bestimmen, ob ein Index außerhalb des gültigen Bereichs liegt.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Diese Methode ist ein O (1)-Vorgang.This method is an O(1) operation.

Weitere Informationen

GetValue(Int64[])

Ruft den Wert an der angegebenen Position des mehrdimensionalen Array ab.Gets the value at the specified position in the multidimensional Array. Die Indizes werden als ein Array von 64-Bit-Ganzzahlen angegeben.The indexes are specified as an array of 64-bit integers.

public:
 System::Object ^ GetValue(... cli::array <long> ^ indices);
public object? GetValue (params long[] indices);
public object GetValue (params long[] indices);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (params long[] indices);
member this.GetValue : int64[] -> obj
[<System.Runtime.InteropServices.ComVisible(false)>]
member this.GetValue : int64[] -> obj
Public Function GetValue (ParamArray indices As Long()) As Object

Parameter

indices
Int64[]

Ein eindimensionales Array von 64-Bit-Ganzzahlen, das die Indizes darstellt, die die Position des abzurufenden Array-Elements angeben.A one-dimensional array of 64-bit integers that represent the indexes specifying the position of the Array element to get.

Gibt zurück

Object

Der Wert an der angegebenen Position des mehrdimensionalen Array.The value at the specified position in the multidimensional Array.

Attribute

Ausnahmen

indices ist null.indices is null.

Die Anzahl von Dimensionen im aktuellen Array ist nicht mit der Anzahl von Elementen in indices identisch.The number of dimensions in the current Array is not equal to the number of elements in indices.

Jedes Element in indices liegt außerhalb des Bereichs der gültigen Indizes für die entsprechende Dimension des aktuellen Array.Any element in indices is outside the range of valid indexes for the corresponding dimension of the current Array.

Beispiele

Im folgenden Codebeispiel wird veranschaulicht, wie ein bestimmter Wert in einem eindimensionalen oder mehrdimensionalen Array festgelegt und erhalten wird.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {

      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );

      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );

      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );

      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );
   }
}


/*
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Hinweise

Die Anzahl der Elemente in indices muss der Anzahl der Dimensionen in der entsprechen Array .The number of elements in indices must equal the number of dimensions in the Array. Alle Elemente im indices Array müssen kollektiv die Position des gewünschten Elements im mehrdimensionalen angeben Array .All elements in the indices array must collectively specify the position of the desired element in the multidimensional Array.

Die GetLowerBound -Methode und die- GetUpperBound Methode können bestimmen, ob ein Index außerhalb des gültigen Bereichs liegt.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Diese Methode ist ein O (1)-Vorgang.This method is an O(1) operation.

Weitere Informationen

Gilt für: