List<T>.Capacity List<T>.Capacity List<T>.Capacity List<T>.Capacity Property

Definition

Ruft die Gesamtzahl der Elemente ab, die die interne Datenstruktur ohne Änderung der Größe aufnehmen kann, oder legt diese Anzahl fest.Gets or sets the total number of elements the internal data structure can hold without resizing.

public:
 property int Capacity { int get(); void set(int value); };
public int Capacity { get; set; }
member this.Capacity : int with get, set
Public Property Capacity As Integer

Eigenschaftswert

Die Anzahl der Elemente, die List<T> enthalten kann, bevor eine Größenanpassung erforderlich ist.The number of elements that the List<T> can contain before resizing is required.

Ausnahmen

Capacity ist auf einen Wert festgelegt, der kleiner als Count ist.Capacity is set to a value that is less than Count.

Im System ist nicht genügend Arbeitsspeicher verfügbar.There is not enough memory available on the system.

Beispiele

Hinweis

Einige der C#-Beispiele in diesem Artikel werden in der Inlinecodeausführung und dem Playground von Try.NET ausgeführt.Some of the C# examples in this article run in the Try.NET inline code runner and playground. Wenn vorhanden, klicken Sie auf die Schaltfläche Ausführen, um ein Beispiel in einem interaktiven Fenster auszuführen.When present, select the Run button to run an example in an interactive window. Nachdem Sie den Code ausgeführt haben, können Sie ihn ändern und den geänderten Code durch erneutes Anklicken der Schaltfläche Ausführen ausführen.Once you execute the code, you can modify it and run the modified code by selecting Run again. Der geänderte Code wird entweder im interaktiven Fenster ausgeführt, oder das interaktive Fenster zeigt alle C#-Compilerfehlermeldungen an, wenn die Kompilierung fehlschlägt.The modified code either runs in the interactive window or, if compilation fails, the interactive window displays all C# compiler error messages.

Im folgenden Beispiel wird veranschaulicht, wie die Kapazität und die Anzahl von List<T> einem-Objekt überprüft werden, das ein einfaches Geschäftsobjekt TrimExcess enthält, und die Verwendung der-Methode veranschaulicht, um zusätzliche Kapazität zu entfernen.The following example demonstrates how to check the capacity and count of a List<T> that contains a simple business object, and illustrates using the TrimExcess method to remove extra capacity.

using System;
using System.Collections.Generic;
// Simple business object. A PartId is used to identify a part 
// but the part name be different for the same Id.
public class Part : IEquatable<Part>
{
    public string PartName { get; set; }
    public int PartId { get; set; }
    public override string ToString()
    {
        return "ID: " + PartId + "   Name: " + PartName;
    }
    public override bool Equals(object obj)
    {
        if (obj == null) return false;
        Part objAsPart = obj as Part;
        if (objAsPart == null) return false;
        else return Equals(objAsPart);
    }
    public override int GetHashCode()
    {
        return base.GetHashCode();
    }
    public bool Equals(Part other)
    {
        if (other == null) return false;
        return (this.PartId.Equals(other.PartId));
    }
    // Should also override == and != operators.

}
public class Example
{

    public static void Main()
    {
        List<Part> parts = new List<Part>();

        Console.WriteLine("\nCapacity: {0}", parts.Capacity);

        parts.Add(new Part() { PartName = "crank arm", PartId = 1234 });
        parts.Add(new Part() { PartName = "chain ring", PartId = 1334 });
        parts.Add(new Part() { PartName = "seat", PartId = 1434 });
        parts.Add(new Part() { PartName = "cassette", PartId = 1534 });
        parts.Add(new Part() { PartName = "shift lever", PartId = 1634 }); ;

        Console.WriteLine();
        foreach (Part aPart in parts)
        {
            Console.WriteLine(aPart);
        }

        Console.WriteLine("\nCapacity: {0}", parts.Capacity);
        Console.WriteLine("Count: {0}", parts.Count);

        parts.TrimExcess();
        Console.WriteLine("\nTrimExcess()");
        Console.WriteLine("Capacity: {0}", parts.Capacity);
        Console.WriteLine("Count: {0}", parts.Count);

        parts.Clear();
        Console.WriteLine("\nClear()");
        Console.WriteLine("Capacity: {0}", parts.Capacity);
        Console.WriteLine("Count: {0}", parts.Count);
    }
    /*
     This code example produces the following output. 
            Capacity: 0

            ID: 1234   Name: crank arm
            ID: 1334   Name: chain ring
            ID: 1434   Name: seat
            ID: 1534   Name: cassette
            ID: 1634   Name: shift lever

            Capacity: 8
            Count: 5

            TrimExcess()
            Capacity: 5
            Count: 5

            Clear()
            Capacity: 5
            Count: 0
     */
}
Imports System.Collections.Generic

' Simple business object. A PartId is used to identify a part 
' but the part name can change.
Public Class Part
    Implements IEquatable(Of Part)
    Public Property PartName() As String
        Get
            Return m_PartName
        End Get
        Set(value As String)
            m_PartName = Value
        End Set
    End Property
    Private m_PartName As String
    Public Property PartId() As Integer
        Get
            Return m_PartId
        End Get
        Set(value As Integer)
            m_PartId = Value
        End Set
    End Property
    Private m_PartId As Integer
    Public Overrides Function ToString() As String
        Return "ID: " & PartId & "   Name: " & PartName
    End Function
    Public Overrides Function Equals(obj As Object) As Boolean
        If obj Is Nothing Then
            Return False
        End If
        Dim objAsPart As Part = TryCast(obj, Part)
        If objAsPart Is Nothing Then
            Return False
        Else
            Return Equals(objAsPart)
        End If
    End Function
    Public Overrides Function GetHashCode() As Integer
        Return MyBase.GetHashCode()
    End Function
    Public Overloads Function Equals(other As Part) As Boolean Implements IEquatable(Of Part).Equals
        If other Is Nothing Then
            Return False
        End If
        Return (Me.PartId.Equals(other.PartId))
    End Function
    ' Should also override == and != operators.

End Class
Public Class Example

    Public Shared Sub Main()
        Dim parts As New List(Of Part)()

        Console.WriteLine(vbLf & "Capacity: {0}", parts.Capacity)

        ' Add parts to the list.
        parts.Add(New Part() With { _
             .PartName = "crank arm", _
             .PartId = 1234 _
        })
        parts.Add(New Part() With { _
             .PartName = "chain ring", _
             .PartId = 1334 _
        })
        parts.Add(New Part() With { _
             .PartName = "regular seat", _
             .PartId = 1434 _
        })
        parts.Add(New Part() With { _
             .PartName = "banana seat", _
             .PartId = 1444 _
        })
        parts.Add(New Part() With { _
             .PartName = "cassette", _
             .PartId = 1534 _
        })
        parts.Add(New Part() With { _
             .PartName = "shift lever", _
             .PartId = 1634 _
        })



        Console.WriteLine()
        For Each aPart As Part In parts
            Console.WriteLine(aPart)
        Next

        Console.WriteLine(vbLf & "Capacity: {0}", parts.Capacity)
        Console.WriteLine("Count: {0}", parts.Count)

        parts.TrimExcess()
        Console.WriteLine(vbLf & "TrimExcess()")
        Console.WriteLine("Capacity: {0}", parts.Capacity)
        Console.WriteLine("Count: {0}", parts.Count)

        parts.Clear()
        Console.WriteLine(vbLf & "Clear()")
        Console.WriteLine("Capacity: {0}", parts.Capacity)
        Console.WriteLine("Count: {0}", parts.Count)
    End Sub
    '
    '     This code example produces the following output. 
    '            Capacity: 0
    '
    '            ID: 1234   Name: crank arm
    '            ID: 1334   Name: chain ring
    '            ID: 1434   Name: seat
    '            ID: 1534   Name: cassette
    '            ID: 1634   Name: shift lever
    '
    '            Capacity: 8
    '            Count: 6
    '
    '            TrimExcess()
    '            Capacity: 6
    '            Count: 6
    '
    '            Clear()
    '            Capacity: 6
    '            Count: 0
    '     

End Class

Im folgenden Beispiel wird die Capacity -Eigenschaft an mehreren Punkten in der Lebensdauer einer Liste gezeigt.The following example shows the Capacity property at several points in the life of a list. Der Parameter lose Konstruktor wird zum Erstellen einer Liste von Zeichen folgen mit einer Kapazität von 0 verwendet, und die Capacity -Eigenschaft wird angezeigt, um dies zu veranschaulichen.The parameterless constructor is used to create a list of strings with a capacity of 0, and the Capacity property is displayed to demonstrate this. Nachdem die Add -Methode zum Hinzufügen mehrerer Elemente verwendet wurde, werden die Elemente aufgelistet, und dann Capacity wird die-Eigenschaft zusammen mit der Count -Eigenschaft erneut angezeigt, um anzuzeigen, dass die Kapazität nach Bedarf erweitert wurde.After the Add method has been used to add several items, the items are listed, and then the Capacity property is displayed again, along with the Count property, to show that the capacity has been increased as needed.

Die Capacity -Eigenschaft wird erneut angezeigt, TrimExcess nachdem die-Methode verwendet wurde, um die Kapazität zu verringern, die der Anzahl entspricht.The Capacity property is displayed again after the TrimExcess method is used to reduce the capacity to match the count. Schließlich wird die Clear -Methode verwendet, um alle Elemente aus der Liste zu entfernen, Capacity und Count die-Eigenschaft und die-Eigenschaft werden erneut angezeigt.Finally, the Clear method is used to remove all items from the list, and the Capacity and Count properties are displayed again.

using namespace System;
using namespace System::Collections::Generic;

void main()
{
    List<String^>^ dinosaurs = gcnew List<String^>();

    Console::WriteLine("\nCapacity: {0}", dinosaurs->Capacity);

    dinosaurs->Add("Tyrannosaurus");
    dinosaurs->Add("Amargasaurus");
    dinosaurs->Add("Mamenchisaurus");
    dinosaurs->Add("Deinonychus");
    dinosaurs->Add("Compsognathus");

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nCapacity: {0}", dinosaurs->Capacity);
    Console::WriteLine("Count: {0}", dinosaurs->Count);

    Console::WriteLine("\nContains(\"Deinonychus\"): {0}",
        dinosaurs->Contains("Deinonychus"));

    Console::WriteLine("\nInsert(2, \"Compsognathus\")");
    dinosaurs->Insert(2, "Compsognathus");

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\ndinosaurs[3]: {0}", dinosaurs[3]);

    Console::WriteLine("\nRemove(\"Compsognathus\")");
    dinosaurs->Remove("Compsognathus");

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    dinosaurs->TrimExcess();
    Console::WriteLine("\nTrimExcess()");
    Console::WriteLine("Capacity: {0}", dinosaurs->Capacity);
    Console::WriteLine("Count: {0}", dinosaurs->Count);

    dinosaurs->Clear();
    Console::WriteLine("\nClear()");
    Console::WriteLine("Capacity: {0}", dinosaurs->Capacity);
    Console::WriteLine("Count: {0}", dinosaurs->Count);
}

/* This code example produces the following output:

Capacity: 0

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

Capacity: 8
Count: 5

Contains("Deinonychus"): True

Insert(2, "Compsognathus")

Tyrannosaurus
Amargasaurus
Compsognathus
Mamenchisaurus
Deinonychus
Compsognathus

dinosaurs[3]: Mamenchisaurus

Remove("Compsognathus")

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

TrimExcess()
Capacity: 5
Count: 5

Clear()
Capacity: 5
Count: 0
 */
List<string> dinosaurs = new List<string>();

Console.WriteLine("\nCapacity: {0}", dinosaurs.Capacity);

dinosaurs.Add("Tyrannosaurus");
dinosaurs.Add("Amargasaurus");
dinosaurs.Add("Mamenchisaurus");
dinosaurs.Add("Deinonychus");
dinosaurs.Add("Compsognathus");
Console.WriteLine();
foreach(string dinosaur in dinosaurs)
{
    Console.WriteLine(dinosaur);
}

Console.WriteLine("\nCapacity: {0}", dinosaurs.Capacity);
Console.WriteLine("Count: {0}", dinosaurs.Count);

Console.WriteLine("\nContains(\"Deinonychus\"): {0}",
    dinosaurs.Contains("Deinonychus"));

Console.WriteLine("\nInsert(2, \"Compsognathus\")");
dinosaurs.Insert(2, "Compsognathus");

Console.WriteLine();
foreach(string dinosaur in dinosaurs)
{
    Console.WriteLine(dinosaur);
}

// Shows accessing the list using the Item property.
Console.WriteLine("\ndinosaurs[3]: {0}", dinosaurs[3]);

Console.WriteLine("\nRemove(\"Compsognathus\")");
dinosaurs.Remove("Compsognathus");

Console.WriteLine();
foreach(string dinosaur in dinosaurs)
{
    Console.WriteLine(dinosaur);
}

dinosaurs.TrimExcess();
Console.WriteLine("\nTrimExcess()");
Console.WriteLine("Capacity: {0}", dinosaurs.Capacity);
Console.WriteLine("Count: {0}", dinosaurs.Count);

dinosaurs.Clear();
Console.WriteLine("\nClear()");
Console.WriteLine("Capacity: {0}", dinosaurs.Capacity);
Console.WriteLine("Count: {0}", dinosaurs.Count);

/* This code example produces the following output:

Capacity: 0

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

Capacity: 8
Count: 5

Contains("Deinonychus"): True

Insert(2, "Compsognathus")

Tyrannosaurus
Amargasaurus
Compsognathus
Mamenchisaurus
Deinonychus
Compsognathus

dinosaurs[3]: Mamenchisaurus

Remove("Compsognathus")

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

TrimExcess()
Capacity: 5
Count: 5

Clear()
Capacity: 5
Count: 0
 */
Imports System.Collections.Generic

Public Class Example

    Public Shared Sub Main()
        Dim dinosaurs As New List(Of String)

        Console.WriteLine(vbLf & "Capacity: {0}", dinosaurs.Capacity)

        dinosaurs.Add("Tyrannosaurus")
        dinosaurs.Add("Amargasaurus")
        dinosaurs.Add("Mamenchisaurus")
        dinosaurs.Add("Deinonychus")
        dinosaurs.Add("Compsognathus")

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "Capacity: {0}", dinosaurs.Capacity)
        Console.WriteLine("Count: {0}", dinosaurs.Count)

        Console.WriteLine(vbLf & "Contains(""Deinonychus""): {0}", _
            dinosaurs.Contains("Deinonychus"))

        Console.WriteLine(vbLf & "Insert(2, ""Compsognathus"")")
        dinosaurs.Insert(2, "Compsognathus")

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next
        ' Shows how to access the list using the Item property.
        Console.WriteLine(vbLf & "dinosaurs(3): {0}", dinosaurs(3))
        Console.WriteLine(vbLf & "Remove(""Compsognathus"")")
        dinosaurs.Remove("Compsognathus")

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        dinosaurs.TrimExcess()
        Console.WriteLine(vbLf & "TrimExcess()")
        Console.WriteLine("Capacity: {0}", dinosaurs.Capacity)
        Console.WriteLine("Count: {0}", dinosaurs.Count)

        dinosaurs.Clear()
        Console.WriteLine(vbLf & "Clear()")
        Console.WriteLine("Capacity: {0}", dinosaurs.Capacity)
        Console.WriteLine("Count: {0}", dinosaurs.Count)
    End Sub
End Class

' This code example produces the following output:
'
'Capacity: 0
'
'Tyrannosaurus
'Amargasaurus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'Capacity: 8
'Count: 5
'
'Contains("Deinonychus"): True
'
'Insert(2, "Compsognathus")
'
'Tyrannosaurus
'Amargasaurus
'Compsognathus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'dinosaurs(3): Mamenchisaurus
'
'Remove("Compsognathus")
'
'Tyrannosaurus
'Amargasaurus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'TrimExcess()
'Capacity: 5
'Count: 5
'
'Clear()
'Capacity: 5
'Count: 0

[<EntryPoint>]
let main argv = 
    // We refer to System.Collections.Generic.List<'T> by its type 
    // abbreviation ResizeArray<'T> to avoid conflict with the List module.    
    // Note: In F# code, F# linked lists are usually preferred over
    // ResizeArray<'T> when an extendable collection is required.
    let dinosaurs = ResizeArray<_>()
 
    // Write out the dinosaurs in the ResizeArray.
    let printDinosaurs() =
        printfn ""
        dinosaurs |> Seq.iter (fun p -> printfn "%O" p) 
 
    
    printfn "\nCapacity: %i" dinosaurs.Capacity
 
    dinosaurs.Add("Tyrannosaurus")
    dinosaurs.Add("Amargasaurus")
    dinosaurs.Add("Mamenchisaurus")
    dinosaurs.Add("Deinonychus")
    dinosaurs.Add("Compsognathus")
 
    printDinosaurs()
 
    printfn "\nCapacity: %i" dinosaurs.Capacity
    printfn "Count: %i" dinosaurs.Count
 
    printfn "\nContains(\"Deinonychus\"): %b" (dinosaurs.Contains("Deinonychus"))
 
    printfn "\nInsert(2, \"Compsognathus\")"
    dinosaurs.Insert(2, "Compsognathus")
 
    printDinosaurs()
 
    // Shows accessing the list using the Item property.
    printfn "\ndinosaurs[3]: %s" dinosaurs.[3]
 
    printfn "\nRemove(\"Compsognathus\")"
    dinosaurs.Remove("Compsognathus") |> ignore
 
    printDinosaurs()
 
    dinosaurs.TrimExcess()
    printfn "\nTrimExcess()"
    printfn "Capacity: %i" dinosaurs.Capacity
    printfn "Count: %i" dinosaurs.Count
 
    dinosaurs.Clear()
    printfn "\nClear()"
    printfn "Capacity: %i" dinosaurs.Capacity
    printfn "Count: %i" dinosaurs.Count
 
    0 // return an integer exit code
 
    (* This code example produces the following output:
 
Capacity: 0
 
Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus
 
Capacity: 8
Count: 5
 
Contains("Deinonychus"): true
 
Insert(2, "Compsognathus")
 
Tyrannosaurus
Amargasaurus
Compsognathus
Mamenchisaurus
Deinonychus
Compsognathus
 
dinosaurs[3]: Mamenchisaurus
 
Remove("Compsognathus")
 
Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus
 
TrimExcess()
Capacity: 5
Count: 5
 
Clear()
Capacity: 5
Count: 0
    *)

Hinweise

Capacitydie Anzahl der Elemente, die von List<T> der gespeichert werden können, bevor die Größe geändert Count wird, während die Anzahl der Elemente ist, die List<T>tatsächlich in der sind.Capacity is the number of elements that the List<T> can store before resizing is required, whereas Count is the number of elements that are actually in the List<T>.

Capacityist immer größer als oder gleich Count.Capacity is always greater than or equal to Count. Wenn Count beim Capacity Hinzufügen von Elementen überschreitet, wird die Kapazität erhöht, indem das interne Array automatisch neu zugewiesen wird, bevor die alten Elemente kopiert und die neuen Elemente hinzugefügt werden.If Count exceeds Capacity while adding elements, the capacity is increased by automatically reallocating the internal array before copying the old elements and adding the new elements.

Wenn die Kapazität deutlich größer als die Anzahl ist und Sie den von List<T>genutzten Arbeitsspeicher verringern möchten, können Sie die Kapazität verringern, indem Sie die TrimExcess -Methode aufrufen oder Capacity die-Eigenschaft explizit auf einen niedrigeren Wert festlegen.If the capacity is significantly larger than the count and you want to reduce the memory used by the List<T>, you can decrease capacity by calling the TrimExcess method or by setting the Capacity property explicitly to a lower value. Wenn der Wert von Capacity explizit festgelegt wird, wird das interne Array ebenfalls neu zugeordnet, um der angegebenen Kapazität Rechnung zu tragen, und alle Elemente werden kopiert.When the value of Capacity is set explicitly, the internal array is also reallocated to accommodate the specified capacity, and all the elements are copied.

Das Abrufen des Werts dieser Eigenschaft ist ein O (1)-Vorgang. das Festlegen der-Eigenschaft ist ein O (n)-Vorgang, wobei n die neue Kapazität ist.Retrieving the value of this property is an O(1) operation; setting the property is an O(n) operation, where n is the new capacity.

Gilt für:

Siehe auch