List<T>.RemoveRange(Int32, Int32) List<T>.RemoveRange(Int32, Int32) List<T>.RemoveRange(Int32, Int32) List<T>.RemoveRange(Int32, Int32) Method

Definition

Entfernt einen Bereich von Elementen aus der List<T>.Removes a range of elements from the List<T>.

public:
 void RemoveRange(int index, int count);
public void RemoveRange (int index, int count);
member this.RemoveRange : int * int -> unit
Public Sub RemoveRange (index As Integer, count As Integer)

Parameter

index
Int32 Int32 Int32 Int32

Der nullbasierte Startindex des zu entfernenden Bereichs von Elementen.The zero-based starting index of the range of elements to remove.

count
Int32 Int32 Int32 Int32

Die Anzahl der zu entfernenden Elemente.The number of elements to remove.

Ausnahmen

index ist kleiner als 0.index is less than 0.

- oder --or- count ist kleiner als 0.count is less than 0.

index und count geben keinen gültigen Bereich von Elementen in der List<T> an.index and count do not denote a valid range of elements in the List<T>.

Beispiele

Im folgenden Beispiel werden die RemoveRange -Methode und verschiedene andere Methoden List<T> der-Klasse veranschaulicht, die auf Bereiche reagieren.The following example demonstrates the RemoveRange method and various other methods of the List<T> class that act on ranges. Nachdem die Liste erstellt und geändert wurde, wird die RemoveRange -Methode verwendet, um zwei Elemente aus der Liste zu entfernen, beginnend bei Indexposition 2.After the list has been created and modified, the RemoveRange method is used to remove two elements from the list, beginning at index location 2.

using namespace System;
using namespace System::Collections::Generic;

void main()
{
    array<String^>^ input = { "Brachiosaurus", 
                              "Amargasaurus", 
                              "Mamenchisaurus" };

    List<String^>^ dinosaurs = 
        gcnew List<String^>((IEnumerable<String^>^) input);

    Console::WriteLine("\nCapacity: {0}", dinosaurs->Capacity);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nAddRange(dinosaurs)");
    dinosaurs->AddRange(dinosaurs);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nRemoveRange(2, 2)");
    dinosaurs->RemoveRange(2, 2);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    input = gcnew array<String^> { "Tyrannosaurus", 
                                   "Deinonychus", 
                                   "Velociraptor"};

    Console::WriteLine("\nInsertRange(3, (IEnumerable<String^>^) input)");
    dinosaurs->InsertRange(3, (IEnumerable<String^>^) input);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\noutput = dinosaurs->GetRange(2, 3)->ToArray()");
    array<String^>^ output = dinosaurs->GetRange(2, 3)->ToArray();
        
    Console::WriteLine();
    for each(String^ dinosaur in output )
    {
        Console::WriteLine(dinosaur);
    }
}

/* This code example produces the following output:

Capacity: 3

Brachiosaurus
Amargasaurus
Mamenchisaurus

AddRange(dinosaurs)

Brachiosaurus
Amargasaurus
Mamenchisaurus
Brachiosaurus
Amargasaurus
Mamenchisaurus

RemoveRange(2, 2)

Brachiosaurus
Amargasaurus
Amargasaurus
Mamenchisaurus

InsertRange(3, (IEnumerable<String^>^) input)

Brachiosaurus
Amargasaurus
Amargasaurus
Tyrannosaurus
Deinonychus
Velociraptor
Mamenchisaurus

output = dinosaurs->GetRange(2, 3)->ToArray()

Amargasaurus
Tyrannosaurus
Deinonychus
 */
using System;
using System.Collections.Generic;

public class Example
{
    public static void Main()
    {
        string[] input = { "Brachiosaurus", 
                           "Amargasaurus", 
                           "Mamenchisaurus" };

        List<string> dinosaurs = new List<string>(input);

        Console.WriteLine("\nCapacity: {0}", dinosaurs.Capacity);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\nAddRange(dinosaurs)");
        dinosaurs.AddRange(dinosaurs);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\nRemoveRange(2, 2)");
        dinosaurs.RemoveRange(2, 2);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        input = new string[] { "Tyrannosaurus", 
                               "Deinonychus", 
                               "Velociraptor"};

        Console.WriteLine("\nInsertRange(3, input)");
        dinosaurs.InsertRange(3, input);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\noutput = dinosaurs.GetRange(2, 3).ToArray()");
        string[] output = dinosaurs.GetRange(2, 3).ToArray();
        
        Console.WriteLine();
        foreach( string dinosaur in output )
        {
            Console.WriteLine(dinosaur);
        }
    }
}

/* This code example produces the following output:

Capacity: 3

Brachiosaurus
Amargasaurus
Mamenchisaurus

AddRange(dinosaurs)

Brachiosaurus
Amargasaurus
Mamenchisaurus
Brachiosaurus
Amargasaurus
Mamenchisaurus

RemoveRange(2, 2)

Brachiosaurus
Amargasaurus
Amargasaurus
Mamenchisaurus

InsertRange(3, input)

Brachiosaurus
Amargasaurus
Amargasaurus
Tyrannosaurus
Deinonychus
Velociraptor
Mamenchisaurus

output = dinosaurs.GetRange(2, 3).ToArray()

Amargasaurus
Tyrannosaurus
Deinonychus
 */
Imports System.Collections.Generic

Public Class Example

    Public Shared Sub Main()

        Dim input() As String = { "Brachiosaurus", _
                                  "Amargasaurus", _
                                  "Mamenchisaurus" }

        Dim dinosaurs As New List(Of String)(input)

        Console.WriteLine(vbLf & "Capacity: {0}", dinosaurs.Capacity)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "AddRange(dinosaurs)")
        dinosaurs.AddRange(dinosaurs)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "RemoveRange(2, 2)")
        dinosaurs.RemoveRange(2, 2)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        input = New String() { "Tyrannosaurus", _
                               "Deinonychus", _
                               "Velociraptor" }

        Console.WriteLine(vbLf & "InsertRange(3, input)")
        dinosaurs.InsertRange(3, input)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "output = dinosaurs.GetRange(2, 3).ToArray")
        Dim output() As String = dinosaurs.GetRange(2, 3).ToArray()
        
        Console.WriteLine()
        For Each dinosaur As String In output
            Console.WriteLine(dinosaur)
        Next

    End Sub
End Class

' This code example produces the following output:
'
'Capacity: 3
'
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'
'AddRange(dinosaurs)
'
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'
'RemoveRange(2, 2)
'
'Brachiosaurus
'Amargasaurus
'Amargasaurus
'Mamenchisaurus
'
'InsertRange(3, input)
'
'Brachiosaurus
'Amargasaurus
'Amargasaurus
'Tyrannosaurus
'Deinonychus
'Velociraptor
'Mamenchisaurus
'
'output = dinosaurs.GetRange(2, 3).ToArray
'
'Amargasaurus
'Tyrannosaurus
'Deinonychus

Hinweise

Die Elemente werden entfernt, und alle Elemente, die in der List<T> enthalten sind, werden von countreduziert.The items are removed and all the elements following them in the List<T> have their indexes reduced by count.

Diese Methode ist ein O (n)-Vorgang, ** bei dem Countn gleich ist.This method is an O(n) operation, where n is Count.

Gilt für:

Siehe auch