Console.Error Eigenschaft

Definition

Ruft den Standard-Fehlerausgabestream ab.Gets the standard error output stream.

public:
 static property System::IO::TextWriter ^ Error { System::IO::TextWriter ^ get(); };
public static System.IO.TextWriter Error { get; }
member this.Error : System.IO.TextWriter
Public Shared ReadOnly Property Error As TextWriter

Eigenschaftswert

Ein TextWriter, der den Standard-Fehlerausgabestream darstellt.A TextWriter that represents the standard error output stream.

Beispiele

Das folgende Beispiel ist ein Befehlszeilen-Hilfsprogramm mit dem Namen ExpandTabs, das Tabstopp Zeichen in einer Textdatei durch vier Leerzeichen ersetzt, den Wert, der von der tabSize Variable definiert wird.The following example is a command line utility named ExpandTabs that replaces tab characters in a text file with four spaces, the value defined by the tabSize variable. Dabei werden die standardmäßigen Eingabe-und Ausgabedaten Ströme an Dateien umgeleitet, die Error-Eigenschaft wird jedoch verwendet, um den Standardfehlerstream in die Konsole zu schreiben.It redirects the standard input and output streams to files, but uses the Error property to write the standard error stream to the console. Sie kann über die Befehlszeile gestartet werden, indem Sie den Namen der Datei angeben, die Tabstopp Zeichen und den Namen der Ausgabedatei enthält.It can be launched from the command line by supplying the name of the file that contains tab characters and the name of the output file.

using namespace System;
using namespace System::IO;

void main()
{
   const int tabSize = 4;
   array<String^>^args = Environment::GetCommandLineArgs();
   String^ usageText = "Usage: EXPANDTABSEX inputfile.txt outputfile.txt";
   StreamWriter^ writer = nullptr;
   
   if ( args->Length < 3 )
   {
      Console::WriteLine( usageText );
      return;
   }

   try
   {
      writer = gcnew StreamWriter( args[ 2 ] );
      Console::SetOut( writer );
      Console::SetIn( gcnew StreamReader( args[ 1 ] ) );
   }
   catch ( IOException^ e ) 
   {
      TextWriter^ errorWriter = Console::Error;
      errorWriter->WriteLine( e->Message );
      errorWriter->WriteLine( usageText );
      return;
   }

   int i;
   while ( (i = Console::Read()) != -1 )
   {
      Char c = (Char)i;
      if ( c == '\t' )
            Console::Write( ((String^)"")->PadRight( tabSize, ' ' ) );
      else
            Console::Write( c );
   }

   writer->Close();
   
   // Recover the standard output stream so that a 
   // completion message can be displayed.
   StreamWriter^ standardOutput = gcnew StreamWriter(Console::OpenStandardOutput());
   standardOutput->AutoFlush = true;
   Console::SetOut(standardOutput);
   Console::WriteLine( "EXPANDTABSEX has completed the processing of {0}.", args[ 0 ] );
   return;
}
using System;
using System.IO;

public class ExpandTabs
{
    private const int tabSize = 4;
    private const string usageText = "Usage: EXPANDTABSEX inputfile.txt outputfile.txt";

    public static void Main(string[] args)
    {
        StreamWriter writer = null;

        if (args.Length < 2) {
            Console.WriteLine(usageText);
            return;
        }

        try {
            writer = new StreamWriter(args[1]);
            Console.SetOut(writer);
            Console.SetIn(new StreamReader(args[0]));
        }
        catch(IOException e) {
            TextWriter errorWriter = Console.Error;
            errorWriter.WriteLine(e.Message);
            errorWriter.WriteLine(usageText);
            return;
        }
        int i;
        while ((i = Console.Read()) != -1) {
            char c = (char)i;
            if (c == '\t')
                Console.Write(("").PadRight(tabSize, ' '));
            else
                Console.Write(c);
        }
        writer.Close();
        // Recover the standard output stream so that a 
        // completion message can be displayed.
        StreamWriter standardOutput = new StreamWriter(Console.OpenStandardOutput());
        standardOutput.AutoFlush = true;
        Console.SetOut(standardOutput);
        Console.WriteLine("EXPANDTABSEX has completed the processing of {0}.", args[0]);
        return;
    }
}
Imports System.IO

Public Class ExpandTabs
   Private Const tabSize As Integer = 4
   Private Const usageText As String = "Usage: EXPANDTABSEX inputfile.txt outputfile.txt"
   
   Public Shared Sub Main(args() As String)
      Dim writer As StreamWriter = Nothing

      If args.Length < 2 Then
         Console.WriteLine(usageText)
         Exit Sub
      End If
      
      Try
         writer = New StreamWriter(args(1))
         Console.SetOut(writer)
         Console.SetIn(New StreamReader(args(0)))
      Catch e As IOException
         Console.Error.WriteLine(e.Message)
         Console.Error.WriteLine(usageText)
         Exit Sub
      End Try
      
      Dim i As Integer = Console.Read()
      While i <> -1 
         Dim c As Char = Convert.ToChar(i)
         If c = ControlChars.Tab Then
            Console.Write("".PadRight(tabSize, " "c))
         Else
            Console.Write(c)
         End If
         i = Console.Read()
      End While
      writer.Close()
      
      ' Reacquire the standard output stream so that a
      ' completion message can be displayed.
      Dim standardOutput As New StreamWriter(Console.OpenStandardOutput)
      standardOutput.AutoFlush = True
      Console.SetOut(standardOutput)
      Console.WriteLine("EXPANDTABSEX has completed the processing of {0}.", args(0))
   End Sub
End Class

Das folgende Beispiel ist ein einfacher Textdatei-Viewer, der den Inhalt einer oder mehrerer Textdateien in der Konsole anzeigt.The following example is a simple text file viewer that displays the contents of one or more text files to the console. Wenn keine Befehlszeilenargumente vorhanden sind oder Dateien, die als Befehlszeilenargumente weitergegeben wurden, nicht vorhanden sind, wird im Beispiel die SetError-Methode aufgerufen, um Fehlerinformationen in eine Datei umzuleiten, die OpenStandardError-Methode beim erneuten Abrufen des Standardfehlerstreams aufzurufen, und es wird angegeben, dass Fehlerinformationen in eine Datei geschrieben wurden.If there are no command line arguments, or if any files passed as command line arguments do not exist, the example calls the SetError method to redirect error information to a file, calls the OpenStandardError method in the process of reacquiring the standard error stream, and indicates that error information was written to a file.

using System;
using System.IO;

public class ViewTextFile
{
   public static void Main()
   {
      String[] args = Environment.GetCommandLineArgs();
      String errorOutput = "";
      // Make sure that there is at least one command line argument.
      if (args.Length <= 1)
         errorOutput += "You must include a filename on the command line.\n";

      for (int ctr = 1; ctr <= args.GetUpperBound(0); ctr++)  {
         // Check whether the file exists.
         if (! File.Exists(args[ctr])) {
            errorOutput += String.Format("'{0}' does not exist.\n", args[ctr]);
         }
         else {
            // Display the contents of the file.
            StreamReader sr = new StreamReader(args[ctr]);
            String contents = sr.ReadToEnd();
            sr.Close();
            Console.WriteLine("*****Contents of file '{0}':\n\n",
                              args[ctr]);
            Console.WriteLine(contents);
            Console.WriteLine("*****\n");
         }
      }

      // Check for error conditions.
      if (! String.IsNullOrEmpty(errorOutput)) {
         // Write error information to a file.
         Console.SetError(new StreamWriter(@".\ViewTextFile.Err.txt"));
         Console.Error.WriteLine(errorOutput);
         Console.Error.Close();
         // Reacquire the standard error stream.
         var standardError = new StreamWriter(Console.OpenStandardError());
         standardError.AutoFlush = true;
         Console.SetError(standardError);
         Console.Error.WriteLine("\nError information written to ViewTextFile.Err.txt");
      }
   }
}
// If the example is compiled and run with the following command line:
//     ViewTextFile file1.txt file2.txt
// and neither file1.txt nor file2.txt exist, it displays the
// following output:
//     Error information written to ViewTextFile.Err.txt
// and writes the following text to ViewTextFile.Err.txt:
//     'file1.txt' does not exist.
//     'file2.txt' does not exist.
Imports System.IO

Module ViewTextFile
   Public Sub Main()
      Dim args() As String = Environment.GetCommandLineArgs()
      Dim errorOutput As String = ""
      ' Make sure that there is at least one command line argument.
      If args.Length <= 1 Then
         errorOutput += "You must include a filename on the command line." +
                        vbCrLf
      End If
      
      For ctr As Integer = 1 To args.GetUpperBound(0)
         ' Check whether the file exists.
         If Not File.Exists(args(ctr)) Then
            errorOutput += String.Format("'{0}' does not exist.{1}",
                                         args(ctr), vbCrLf)
         Else
            ' Display the contents of the file.
            Dim sr As New StreamReader(args(ctr))
            Dim contents As String = sr.ReadToEnd()
            sr.Close()
            Console.WriteLine("***** Contents of file '{0}':{1}{1}",
                              args(ctr), vbCrLf)
            Console.WriteLine(contents)
            Console.WriteLine("*****{0}", vbCrLf)
         End If
      Next

      ' Check for error conditions.
      If Not String.IsNullOrEmpty(errorOutput) Then
         ' Write error information to a file.
         Console.SetError(New StreamWriter(".\ViewTextFile.Err.txt"))
         Console.Error.WriteLine(errorOutput)
         Console.Error.Close()
         ' Reacquire the standard error stream.
         Dim standardError As New StreamWriter(Console.OpenStandardError())
         standardError.AutoFlush = True
         Console.SetError(standardError)
         Console.Error.WriteLine("{0}Error information written to ViewTextFile.Err.txt",
                                 vbCrLf)
      End If
   End Sub
End Module
' If the example is compiled and run with the following command line:
'     ViewTextFile file1.txt file2.txt
' and neither file1.txt nor file2.txt exist, it displays the
' following output:
'     Error information written to ViewTextFile.Err.txt
' and writes the following text to ViewTextFile.Err.txt:
'     'file1.txt' does not exist.
'     'file2.txt' does not exist.

Beachten Sie, dass die StreamWriter.AutoFlush-Eigenschaft auf true festgelegt ist, bevor Sie den Fehler Datenstrom erneut abrufen.Note that the StreamWriter.AutoFlush property is set to true before reacquiring the error stream. Dadurch wird sichergestellt, dass die Ausgabe sofort an die Konsole gesendet wird, anstatt gepuffert zu werden.This ensures that output will be sent to the console immediately rather than buffered.

Hinweise

Dieser Standardfehlerstream wird standardmäßig auf die Konsole festgelegt.This standard error stream is set to the console by default. Sie kann mit der SetError-Methode auf einen anderen Stream festgelegt werden.It can be set to another stream with the SetError method. Nachdem der Standardfehlerstream umgeleitet wurde, kann er erneut abgerufen werden, indem die OpenStandardError-Methode aufgerufen wird.After the standard error stream is redirected, it can be reacquired by calling the OpenStandardError method.

In Konsolen Anwendungen, deren Informationsausgabe häufig in eine Datei umgeleitet wird, kann der Standardfehlerstream, der über die Error-Eigenschaft verfügbar ist, zum Anzeigen von Informationen in der Konsole verwendet werden, auch wenn die Ausgabe umgeleitet wird.In console applications whose informational output is often redirected to a file, the standard error stream available through the Error property can be used to display information to the console even if output is redirected. Im folgenden Beispiel werden Produkt Tabellen für 10 Zahlen gleichzeitig, beginnend mit 1, angezeigt.The following example displays product tables for 10 numbers at a time starting with 1. Nach jedem Satz von 10 Zahlen wird die Error-Eigenschaft verwendet, um den Benutzer zu Fragen, ob der nächste Satz angezeigt werden soll.After every set of 10 numbers, the Error property is used to ask the user whether to display the next set. Wenn die Standardausgabe an eine Datei umgeleitet wird, wird der Benutzer nach wie vor gefragt, ob die Routine den nächsten Satz von Produkten generieren soll.If the standard output is redirected to a file, the user is still asked whether the routine should generate the next set of products.

using System;

public class Example
{
   public static void Main()
   {
      int increment = 0;
      bool exitFlag = false;

      while (! exitFlag) {
         if (Console.IsOutputRedirected)
            Console.Error.WriteLine("Generating multiples of numbers from {0} to {1}",
                                    increment + 1, increment + 10);

         Console.WriteLine("Generating multiples of numbers from {0} to {1}",
                           increment + 1, increment + 10);
         for (int ctr = increment + 1; ctr <= increment + 10; ctr++) {
            Console.Write("Multiples of {0}: ", ctr);
            for (int ctr2 = 1; ctr2 <= 10; ctr2++)
               Console.Write("{0}{1}", ctr * ctr2, ctr2 == 10 ? "" : ", ");

            Console.WriteLine();
         }
         Console.WriteLine();

         increment += 10;
         Console.Error.Write("Display multiples of {0} through {1} (y/n)? ",
                             increment + 1, increment + 10);
         Char response = Console.ReadKey(true).KeyChar;
         Console.Error.WriteLine(response);
         if (! Console.IsOutputRedirected)
            Console.CursorTop--;

         if (Char.ToUpperInvariant(response) == 'N')
            exitFlag = true;
      }
   }
}
Module Example
   Public Sub Main()
      Dim increment As Integer = 0
      Dim exitFlag As Boolean = False
      
      Do While Not exitFlag
         If Console.IsOutputRedirected Then
            Console.Error.WriteLine("Generating multiples of numbers from {0} to {1}",
                                    increment + 1, increment + 10)
         End If
         Console.WriteLine("Generating multiples of numbers from {0} to {1}",
                           increment + 1, increment + 10)
         For ctr As Integer = increment + 1 To increment + 10
            Console.Write("Multiples of {0}: ", ctr)
            For ctr2 As Integer = 1 To 10
               Console.Write("{0}{1}", ctr * ctr2, If(ctr2 = 10, "", ", "))
            Next
            Console.WriteLine()
         Next
         Console.WriteLine()
         
         increment += 10
         Console.Error.Write("Display multiples of {0} through {1} (y/n)? ",
                             increment + 1, increment + 10)
         Dim response As Char = Console.ReadKey(True).KeyChar
         Console.Error.WriteLine(response)
         If Not Console.IsOutputRedirected Then
            Console.CursorTop = Console.CursorTop - 1
         End If
         If Char.ToUpperInvariant(response) = "N" Then exitFlag = True
      Loop
   End Sub
End Module

Gilt für:

Siehe auch