String.CompareTo Methode

Definition

Vergleicht diese Instanz mit einem angegebenen Objekt oder String und gibt eine ganze Zahl zurück, die angibt, ob diese Instanz in der Sortierreihenfolge an einer früheren, späteren oder derselben Position wie das angegebene Objekt oder String aufgeführt wird.Compares this instance with a specified object or String and returns an integer that indicates whether this instance precedes, follows, or appears in the same position in the sort order as the specified object or String.

Überlädt

CompareTo(Object)

Vergleicht diese Instanz mit einem angegebenen Object und gibt an, ob diese Instanz in der Sortierreihenfolge an einer früheren, späteren oder derselben Position wie das angegebene Object aufgeführt wird.Compares this instance with a specified Object and indicates whether this instance precedes, follows, or appears in the same position in the sort order as the specified Object.

CompareTo(String)

Vergleicht diese Instanz mit einem angegebenen String-Objekt und gibt an, ob diese Instanz in der Sortierreihenfolge an einer früheren, späteren oder derselben Position wie die angegebene Zeichenfolge aufgeführt wird.Compares this instance with a specified String object and indicates whether this instance precedes, follows, or appears in the same position in the sort order as the specified string.

Hinweise

Beide über Ladungen der CompareTo-Methode führen Kultur abhängige Vergleiche mit Unterscheidung nach Groß-/Kleinschreibung durch.Both overloads of the CompareTo method perform culture-sensitive and case-sensitive comparison. Sie können diese Methode nicht verwenden, um Kultur unabhängige oder ordinale Vergleiche auszuführen.You cannot use this method to perform culture-insensitive or ordinal comparisons. Aus Gründen der Übersichtlichkeit des Codes wird empfohlen, die CompareTo-Methode zu vermeiden und stattdessen die Compare-Methode aufzurufen.For code clarity, we recommend that you avoid the CompareTo method and call the Compare method instead.

CompareTo(Object)

Vergleicht diese Instanz mit einem angegebenen Object und gibt an, ob diese Instanz in der Sortierreihenfolge an einer früheren, späteren oder derselben Position wie das angegebene Object aufgeführt wird.Compares this instance with a specified Object and indicates whether this instance precedes, follows, or appears in the same position in the sort order as the specified Object.

public:
 virtual int CompareTo(System::Object ^ value);
public int CompareTo (object value);
abstract member CompareTo : obj -> int
override this.CompareTo : obj -> int
Public Function CompareTo (value As Object) As Integer

Parameter

value
Object

Ein Objekt, das als String ausgewertet wird.An object that evaluates to a String.

Gibt zurück

Eine 32-Bit-Ganzzahl mit Vorzeichen, die angibt, ob diese Instanz in der Sortierreihenfolge an einer früheren, späteren oder derselben Position wie der value-Parameter aufgeführt wird.A 32-bit signed integer that indicates whether this instance precedes, follows, or appears in the same position in the sort order as the value parameter.

WertValue BedingungCondition
Kleiner als 0 (null)Less than zero Diese Instanz geht value voran.This instance precedes value.
ZeroZero Diese Instanz hat in der Sortierreihenfolge dieselbe Position wie value.This instance has the same position in the sort order as value.
Größer als 0 (null)Greater than zero Diese Instanz folgt value.This instance follows value. - oder --or- value ist null.value is null.

Implementiert

Ausnahmen

value ist keine String.value is not a String.

Beispiele

Im folgenden Beispiel wird die CompareTo-Methode mit einem-Objectverwendet.The following example uses the CompareTo method with an Object. Da versucht wird, eine String Instanz mit einem TestClass-Objekt zu vergleichen, löst die Methode eine ArgumentExceptionaus.Because it attempts to compare a String instance to a TestClass object, the method throws an ArgumentException.

using namespace System;

public ref class TestClass{};

int main()
{
   TestClass^ test = gcnew TestClass;
   array<Object^>^ objectsToCompare = { test, test->ToString(), 123,
                                        (123).ToString(), "some text",
                                        "Some Text" };
   String^ s = "some text";
   for each (Object^ objectToCompare in objectsToCompare) {
      try {
         Int32 i = s->CompareTo(objectToCompare);
         Console::WriteLine("Comparing '{0}' with '{1}': {2}",
                            s, objectToCompare, i);
      }
      catch (ArgumentException^ e) {
         Console::WriteLine("Bad argument: {0} (type {1})",
                            objectToCompare,
                            objectToCompare->GetType()->Name);
      }
   }
}
// The example displays the following output:
//    Bad argument: TestClass (type TestClass)
//    Comparing 'some text' with 'TestClass': -1
//    Bad argument: 123 (type Int32)
//    Comparing 'some text' with '123': 1
//    Comparing 'some text' with 'some text': 0
//    Comparing 'some text' with 'Some Text': -1
using System;

public class TestClass
{}

public class Example 
{
   public static void Main()
   {
      var test = new TestClass();
      Object[] objectsToCompare = { test, test.ToString(), 123,
                                    123.ToString(), "some text",
                                    "Some Text" };
      string s = "some text";
      foreach (var objectToCompare in objectsToCompare) {
         try {
            int i = s.CompareTo(objectToCompare);
            Console.WriteLine("Comparing '{0}' with '{1}': {2}",
                              s, objectToCompare, i);
         }
         catch (ArgumentException) {
            Console.WriteLine("Bad argument: {0} (type {1})",
                              objectToCompare,
                              objectToCompare.GetType().Name);
         }
      }
   }
}
// The example displays the following output:
//    Bad argument: TestClass (type TestClass)
//    Comparing 'some text' with 'TestClass': -1
//    Bad argument: 123 (type Int32)
//    Comparing 'some text' with '123': 1
//    Comparing 'some text' with 'some text': 0
//    Comparing 'some text' with 'Some Text': -1
Public Class TestClass
End Class 


Public Class Example
   Public Shared Sub Main()
      Dim test As New TestClass()
      Dim objectsToCompare() As Object = { test, test.ToString(), 123,
                                           123.ToString(), "some text",
                                           "Some Text" }
      Dim s As String = "some text"
      For Each objectToCompare In objectsToCompare
         Try
            Dim i As Integer = s.CompareTo(objectToCompare)
            Console.WriteLine("Comparing '{0}' with '{1}': {2}",
                              s, objectToCompare, i)
         Catch e As ArgumentException
            Console.WriteLine("Bad argument: {0} (type {1})",
                              objectToCompare,
                              objectToCompare.GetType().Name)
         End Try
      Next
   End Sub 
End Class 
' The example displays the following output:
'       Bad argument: TestClass (type TestClass)
'       Comparing 'some text' with 'TestClass': -1
'       Bad argument: 123 (type Int32)
'       Comparing 'some text' with '123': 1
'       Comparing 'some text' with 'some text': 0
'       Comparing 'some text' with 'Some Text': -1

Hinweise

value muss ein String Objekt sein.value must be a String object.

Achtung

Die CompareTo-Methode wurde hauptsächlich für die Verwendung in Sortier-oder alphabetisierungsvorgängen entwickelt.The CompareTo method was designed primarily for use in sorting or alphabetizing operations. Er sollte nicht verwendet werden, wenn der primäre Zweck des Methoden Aufrufes ist, zu bestimmen, ob zwei Zeichen folgen äquivalent sind.It should not be used when the primary purpose of the method call is to determine whether two strings are equivalent. Um zu ermitteln, ob zwei Zeichen folgen äquivalent sind, müssen Sie die Equals-Methode abrufen.To determine whether two strings are equivalent, call the Equals method.

Diese Methode führt einen Vergleich mit der aktuellen Kultur durch (Unterscheidung nach Groß-/Kleinschreibung und Kultur sensitiv).This method performs a word (case-sensitive and culture-sensitive) comparison using the current culture. Weitere Informationen zu Wort-, Zeichen folgen-und ordinalsortierungen finden Sie unter System.Globalization.CompareOptions.For more information about word, string, and ordinal sorts, see System.Globalization.CompareOptions.

Weitere Informationen zum Verhalten dieser Methode finden Sie im Abschnitt "Hinweise" der String.Compare(String, String)-Methode.For more information about the behavior of this method, see the Remarks section of the String.Compare(String, String) method.

Hinweise für Aufrufer

Zeichensätze enthalten ignorierbare Zeichen.Character sets include ignorable characters. Die CompareTo(Object)-Methode berücksichtigt solche Zeichen nicht, wenn Sie einen Kultur abhängigen Vergleich durchführt.The CompareTo(Object) method does not consider such characters when it performs a culture-sensitive comparison. Wenn der folgende Code z. b. auf der .NET Framework 4.NET Framework 4 oder später ausgeführt wird, gibt ein Vergleich von "Animal" mit "Ani-mal" (mit einem weichen Bindestrich oder "U + 00ad") an, dass die beiden Zeichen folgen äquivalent sind.For example, if the following code is run on the .NET Framework 4.NET Framework 4 or later, a comparison of "animal" with "ani-mal" (using a soft hyphen, or U+00AD) indicates that the two strings are equivalent.

[! Code-csharpSystem. String. CompareTo # 1] [! Code-vbSystem. String. CompareTo # 1][!code-csharpSystem.String.CompareTo#1] [!code-vbSystem.String.CompareTo#1] Um Ignorable-Zeichen in einem Zeichen folgen Vergleich zu erkennen, müssen Sie die CompareOrdinal(String, String)-Methode abrufen.To recognize ignorable characters in a string comparison, call the CompareOrdinal(String, String) method.

Siehe auch

CompareTo(String)

Vergleicht diese Instanz mit einem angegebenen String-Objekt und gibt an, ob diese Instanz in der Sortierreihenfolge an einer früheren, späteren oder derselben Position wie die angegebene Zeichenfolge aufgeführt wird.Compares this instance with a specified String object and indicates whether this instance precedes, follows, or appears in the same position in the sort order as the specified string.

public:
 int CompareTo(System::String ^ strB);
public int CompareTo (string strB);
member this.CompareTo : string -> int
Public Function CompareTo (strB As String) As Integer

Parameter

strB
String

Die Zeichenfolge, die mit dieser Instanz verglichen werden soll.The string to compare with this instance.

Gibt zurück

Eine 32-Bit-Ganzzahl mit Vorzeichen, die angibt, ob diese Instanz in der Sortierreihenfolge an einer früheren, späteren oder derselben Position wie der strB-Parameter aufgeführt wird.A 32-bit signed integer that indicates whether this instance precedes, follows, or appears in the same position in the sort order as the strB parameter.

WertValue BedingungCondition
Kleiner als 0 (null)Less than zero Diese Instanz geht strB voran.This instance precedes strB.
ZeroZero Diese Instanz hat in der Sortierreihenfolge dieselbe Position wie strB.This instance has the same position in the sort order as strB.
Größer als 0 (null)Greater than zero Diese Instanz folgt strB.This instance follows strB. - oder --or- strB ist null.strB is null.

Implementiert

Beispiele

Im folgenden Beispiel wird die CompareTo-Methode verwendet, um die aktuelle Zeichen folgen Instanz mit einer anderen Zeichenfolge zu vergleichen.The following example uses the CompareTo method to compare the current string instance with another string.

using namespace System;

String^ CompareStrings(String^ str1, String^ str2)
{
   // compare the values, using the CompareTo method on the first string
   int cmpVal = str1->CompareTo(str2);
   if (cmpVal == 0)
      // the values are the same
      return "The strings occur in the same position in the sort order.";
   else if (cmpVal < 0)
      return "The first string precedes the second in the sort order.";
   else
      return "The first string follows the second in the sort order.";
}

int main()
{
   String^ strFirst = "Goodbye";
   String^ strSecond = "Hello";
   String^ strThird = "a small String*";
   String^ strFourth = "goodbye";
   
   // Compare a string to itself.
   Console::WriteLine(CompareStrings(strFirst, strFirst));
   Console::WriteLine(CompareStrings(strFirst, strSecond));
   Console::WriteLine(CompareStrings(strFirst, strThird));
   
   // Compare a string to another string that varies only by case.
   Console::WriteLine(CompareStrings(strFirst, strFourth));
   Console::WriteLine(CompareStrings(strFourth, strFirst));
}
// The example displays the following output:
//       The strings occur in the same position in the sort order.
//       The first string precedes the second in the sort order.
//       The first string follows the second in the sort order.
//       The first string follows the second in the sort order.
//       The first string precedes the second in the sort order.
using System;

public class Example
{
   public static void Main()
   {
      string strFirst = "Goodbye";
      string strSecond = "Hello";
      string strThird = "a small string";
      string strFourth = "goodbye";

      // Compare a string to itself.
      Console.WriteLine(CompareStrings(strFirst, strFirst));

      Console.WriteLine(CompareStrings(strFirst, strSecond));
      Console.WriteLine(CompareStrings(strFirst, strThird));

      // Compare a string to another string that varies only by case.
      Console.WriteLine(CompareStrings(strFirst, strFourth));
      Console.WriteLine(CompareStrings(strFourth, strFirst));
   }

   private static string CompareStrings( string str1, string str2 )
   {
      // Compare the values, using the CompareTo method on the first string.
      int cmpVal = str1.CompareTo(str2);

       if (cmpVal == 0) // The strings are the same.
         return "The strings occur in the same position in the sort order.";
      else if (cmpVal < 0)
         return "The first string precedes the second in the sort order.";
      else
         return "The first string follows the second in the sort order.";
    }
}
// The example displays the following output:
//       The strings occur in the same position in the sort order.
//       The first string precedes the second in the sort order.
//       The first string follows the second in the sort order.
//       The first string follows the second in the sort order.
//       The first string precedes the second in the sort order.
Public Module Example
   Public Sub Main()
      Dim strFirst As String = "Goodbye"
      Dim strSecond As String = "Hello"
      Dim strThird As String = "a small string"
      Dim strFourth As String = "goodbye"

      ' Compare a string to itself.
      Console.WriteLine(CompareStrings(strFirst, strFirst))
        
      Console.WriteLine(CompareStrings(strFirst, strSecond))
      Console.WriteLine(CompareStrings(strFirst, strThird))
        
      ' Compare a string to another string that varies only by case.
      Console.WriteLine(CompareStrings(strFirst, strFourth))
      Console.WriteLine(CompareStrings(strFourth, strFirst))
   End Sub
    
   Private Function CompareStrings(str1 As String, str2 As String) As String
      Dim cmpVal As Integer = str1.CompareTo(str2)
      If cmpVal = 0 Then
         ' The values are the same.
         Return "The strings occur in the same position in the sort order."
      ElseIf cmpVal < 0 Then
         Return "The first string precedes the second in the sort order."
      Else
         Return "The first string follows the second in the sort order."
      End If
   End Function
End Module
' This example displays the following output:
'       The strings occur in the same position in the sort order.
'       The strings occur in the same position in the sort order.
'       The first string precedes the second in the sort order.
'       The first string follows the second in the sort order.
'       The first string follows the second in the sort order.
'       The first string precedes the second in the sort order.

Im folgenden Beispiel werden generische und nicht generische Versionen der CompareTo-Methode für verschiedene Wert-und Verweis Typen veranschaulicht.The following example demonstrates generic and non-generic versions of the CompareTo method for several value and reference types.

// This example demonstrates the two versions of the 
// CompareTo method for several base types.
// The general version takes a parameter of type Object, while the specific
// version takes a type-specific parameter, such as Boolean, Int32, or Double.
using namespace System;

void Show( String^ caption, Object^ var1, Object^ var2, int resultGeneric, int resultNonGeneric )
{
   String^ relation;
   Console::Write( caption );
   if ( resultGeneric == resultNonGeneric )
   {
      if ( resultGeneric < 0 )
            relation = "less than";
      else
      if ( resultGeneric > 0 )
            relation = "greater than";
      else
            relation = "equal to";
      Console::WriteLine( "{0} is {1} {2}", var1, relation, var2 );
   }
   // The following condition will never occur because the generic and non-generic
   // CompareTo methods are equivalent.
   else
   {
      Console::WriteLine( "Generic CompareTo = {0}; non-generic CompareTo = {1}", resultGeneric, resultNonGeneric );
   }
}

int main()
{
   String^ nl = Environment::NewLine;
   String^ msg = "{0}The following is the result of using the generic and non-generic{0}"
   "versions of the CompareTo method for several base types:{0}";
   Object^ obj; // An Object used to insure CompareTo(Object) is called.

   DateTime now = DateTime::Now;
   
   // Time span = 11 days, 22 hours, 33 minutes, 44 seconds
   TimeSpan tsX = TimeSpan(11,22,33,44);
   
   // Version = 1.2.333.4
   Version^ versX = gcnew Version(  "1.2.333.4" );
   
   // Guid = CA761232-ED42-11CE-BACD-00AA0057B223
   Guid guidX = Guid( "{CA761232-ED42-11CE-BACD-00AA0057B223}");
   Boolean a1 = true,a2 = true;
   Byte b1 = 1,b2 = 1;
   Int16 c1 = -2,c2 = 2;
   Int32 d1 = 3,d2 = 3;
   Int64 e1 = 4,e2 = -4;
   Decimal f1 = Decimal(-5.5), f2 = Decimal(5.5);
   Single g1 = 6.6f,g2 = 6.6f;
   Double h1 = 7.7,h2 = -7.7;
   Char i1 = 'A',i2 = 'A';
   String^ j1 = "abc", ^j2 = "abc";
   DateTime k1 = now,k2 = now;
   TimeSpan l1 = tsX,l2 = tsX;
   Version^ m1 = versX, ^m2 = gcnew Version(  "2.0" );
   Guid n1 = guidX,n2 = guidX;
   
   // The following types are not CLS-compliant.
   SByte w1 = 8,w2 = 8;
   UInt16 x1 = 9,x2 = 9;
   UInt32 y1 = 10,y2 = 10;
   UInt64 z1 = 11,z2 = 11;
   
   //
   Console::WriteLine( msg, nl );
   try
   {
      Show( "Boolean: ", a1, a2, a1.CompareTo( a2 ), a1.CompareTo( a2 ) );
      Show( "Byte:    ", b1, b2, b1.CompareTo( b2 ), b1.CompareTo( b2 ) );
      Show( "Int16:   ", c1, c2, c1.CompareTo( c2 ), c1.CompareTo( c2 ) );
      Show( "Int32:   ", d1, d2, d1.CompareTo( d2 ), d1.CompareTo( d2 ) );
      Show( "Int64:   ", e1, e2, e1.CompareTo( e2 ), e1.CompareTo( e2 ) );
      Show( "Decimal: ", f1, f2, f1.CompareTo( f2 ), f1.CompareTo( f2 ) );
      Show( "Single:  ", g1, g2, g1.CompareTo( g2 ), g1.CompareTo( g2 ) );
      Show( "Double:  ", h1, h2, h1.CompareTo( h2 ), h1.CompareTo( h2 ) );
      Show( "Char:    ", i1, i2, i1.CompareTo( i2 ), i1.CompareTo( i2 ) );
      
      // Use an anonymous object to hide the String object.
      obj = j2;
      Show( "String:  ", j1, j2, j1->CompareTo( j2 ), j1->CompareTo( obj ) );
      Show( "DateTime:", k1, k2, k1.CompareTo( k2 ), k1.CompareTo( k2 ) );
      Show(  "TimeSpan: ", l1, l2, l1.CompareTo( l2 ), l1.CompareTo( l2 ) );
      
      // Use an anonymous object to hide the Version object.
      obj = m2;
      Show(  "Version:  ", m1, m2, m1->CompareTo( m2 ), m1->CompareTo( obj ) );
      Show(  "Guid:     ", n1, n2, n1.CompareTo( n2 ), n1.CompareTo( n2 ) );
      
      //
      Console::WriteLine( "{0}The following types are not CLS-compliant:", nl );
      Show( "SByte:   ", w1, w2, w1.CompareTo( w2 ), w1.CompareTo( w2 ) );
      Show( "UInt16:  ", x1, x2, x1.CompareTo( x2 ), x1.CompareTo( x2 ) );
      Show( "UInt32:  ", y1, y2, y1.CompareTo( y2 ), y1.CompareTo( y2 ) );
      Show( "UInt64:  ", z1, z2, z1.CompareTo( z2 ), z1.CompareTo( z2 ) );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e );
   }

}
//     This example displays the following output:
//     
//     The following is the result of using the generic and non-generic versions of the
//     CompareTo method for several base types:
//     
//     Boolean:  True is equal to True
//     Byte:     1 is equal to 1
//     Int16:    -2 is less than 2
//     Int32:    3 is equal to 3
//     Int64:    4 is greater than -4
//     Decimal:  -5.5 is less than 5.5
//     Single:   6.6 is equal to 6.6
//     Double:   7.7 is greater than -7.7
//     Char:     A is equal to A
//     String:   abc is equal to abc
//     DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
//     TimeSpan: 11.22:33:44 is equal to 11.22:33:44
//     Version:  1.2.333.4 is less than 2.0
//     Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
//     aa0057b223
//     
//     The following types are not CLS-compliant:
//     SByte:    8 is equal to 8
//     UInt16:   9 is equal to 9
//     UInt32:   10 is equal to 10
//     UInt64:   11 is equal to 11
// This example demonstrates the generic and non-generic versions of the 
// CompareTo method for several base types.
// The non-generic version takes a parameter of type Object, while the generic
// version takes a type-specific parameter, such as Boolean, Int32, or Double.

using System;

class Sample 
{
    public static void Main() 
    {
    string    nl = Environment.NewLine;
    string    msg = "{0}The following is the result of using the generic and non-generic{0}" +
                    "versions of the CompareTo method for several base types:{0}";

    DateTime  now = DateTime.Now;
// Time span = 11 days, 22 hours, 33 minutes, 44 seconds
    TimeSpan  tsX = new TimeSpan(11, 22, 33, 44); 
// Version = 1.2.333.4
    Version   versX = new Version("1.2.333.4");  
// Guid = CA761232-ED42-11CE-BACD-00AA0057B223
    Guid      guidX = new Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}");

    Boolean  a1 = true,  a2 = true;
    Byte     b1 = 1,     b2 = 1;
    Int16    c1 = -2,    c2 = 2;
    Int32    d1 = 3,     d2 = 3;
    Int64    e1 = 4,     e2 = -4;
    Decimal  f1 = -5.5m, f2 = 5.5m;
    Single   g1 = 6.6f,  g2 = 6.6f;
    Double   h1 = 7.7d,  h2 = -7.7d;
    Char     i1 = 'A',   i2 = 'A';
    String   j1 = "abc", j2 = "abc";
    DateTime k1 = now,   k2 = now;
    TimeSpan l1 = tsX,   l2 = tsX;
    Version  m1 = versX, m2 = new Version("2.0");
    Guid     n1 = guidX, n2 = guidX;

// The following types are not CLS-compliant.
    SByte    w1 = 8,     w2 = 8;
    UInt16   x1 = 9,     x2 = 9;
    UInt32   y1 = 10,    y2 = 10;
    UInt64   z1 = 11,    z2 = 11;
//
    Console.WriteLine(msg, nl);
    try 
        {
// The second and third Show method call parameters are automatically boxed because
// the second and third Show method declaration arguments expect type Object.

        Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo((Object)a2));
        Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo((Object)b2));
        Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo((Object)c2));
        Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo((Object)d2));
        Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo((Object)e2));
        Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo((Object)f2));
        Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo((Object)g2));
        Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo((Object)h2));
        Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo((Object)i2));
        Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo((Object)j2));
        Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo((Object)k2));
        Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo((Object)l2));
        Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo((Object)m2));
        Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo((Object)n2));
//
        Console.WriteLine("{0}The following types are not CLS-compliant:", nl);
        Show("SByte:    ", w1, w2, w1.CompareTo(w2), w1.CompareTo((Object)w2));
        Show("UInt16:   ", x1, x2, x1.CompareTo(x2), x1.CompareTo((Object)x2));
        Show("UInt32:   ", y1, y2, y1.CompareTo(y2), y1.CompareTo((Object)y2));
        Show("UInt64:   ", z1, z2, z1.CompareTo(z2), z1.CompareTo((Object)z2));
        }
    catch (Exception e)
        {
        Console.WriteLine(e);
        }
    }

    public static void Show(string caption, Object var1, Object var2, 
                            int resultGeneric, int resultNonGeneric)
    {
    string relation;

    Console.Write(caption);
    if (resultGeneric == resultNonGeneric) 
        {
        if      (resultGeneric < 0) relation = "less than";
        else if (resultGeneric > 0) relation = "greater than";
        else                        relation = "equal to";
        Console.WriteLine("{0} is {1} {2}", var1, relation, var2);
        }

// The following condition will never occur because the generic and non-generic
// CompareTo methods are equivalent.

    else
        {
        Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}", 
                           resultGeneric, resultNonGeneric);
        }
   }
}
/*
This example produces the following results:

The following is the result of using the generic and non-generic versions of the
CompareTo method for several base types:

Boolean:  True is equal to True
Byte:     1 is equal to 1
Int16:    -2 is less than 2
Int32:    3 is equal to 3
Int64:    4 is greater than -4
Decimal:  -5.5 is less than 5.5
Single:   6.6 is equal to 6.6
Double:   7.7 is greater than -7.7
Char:     A is equal to A
String:   abc is equal to abc
DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
TimeSpan: 11.22:33:44 is equal to 11.22:33:44
Version:  1.2.333.4 is less than 2.0
Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
aa0057b223

The following types are not CLS-compliant:
SByte:    8 is equal to 8
UInt16:   9 is equal to 9
UInt32:   10 is equal to 10
UInt64:   11 is equal to 11
*/
' This example demonstrates the generic and non-generic versions of the 
' CompareTo method for several base types.
' The non-generic version takes a parameter of type Object, while the generic
' version takes a type-specific parameter, such as Boolean, Int32, or Double.

Class Sample
   Public Shared Sub Main()
      Dim nl As String = Environment.NewLine
      Dim msg As String = _
          "{0}The following is the result of using the generic and non-generic{0}" & _
          "versions of the CompareTo method for several base types:{0}"
      
      Dim now As DateTime = DateTime.Now
      ' Time span = 11 days, 22 hours, 33 minutes, 44 seconds
      Dim tsX As New TimeSpan(11, 22, 33, 44)
      ' Version = 1.2.333.4
      Dim versX As New Version("1.2.333.4")
      ' Guid = CA761232-ED42-11CE-BACD-00AA0057B223
      Dim guidX As New Guid("{CA761232-ED42-11CE-BACD-00AA0057B223}")
      
      Dim a1 As [Boolean] = True,    a2 As [Boolean] = True
      Dim b1 As [Byte] = 1,          b2 As [Byte] = 1
      Dim c1 As Int16 = -2,          c2 As Int16 = 2
      Dim d1 As Int32 = 3,           d2 As Int32 = 3
      Dim e1 As Int64 = 4,           e2 As Int64 = -4
      Dim f1 As [Decimal] = -5.5D,   f2 As [Decimal] = 5.5D
      Dim g1 As [Single] = 6.6F,     g2 As [Single] = 6.6F
      Dim h1 As [Double] = 7.7,      h2 As [Double] = -7.7
      Dim i1 As [Char] = "A"c,       i2 As [Char] = "A"c
      Dim j1 As String = "abc",      j2 As String = "abc"
      Dim k1 As DateTime = now,      k2 As DateTime = now
      Dim l1 As TimeSpan = tsX,      l2 As TimeSpan = tsX
      Dim m1 As Version = versX,     m2 As New Version("2.0")
      Dim n1 As Guid = guidX,        n2 As Guid = guidX
      
      ' The following types are not CLS-compliant.
      ' SByte, UInt16, UInt32, UInt64

      Console.WriteLine(msg, nl)
      Try
         ' The second and third Show method call parameters are automatically boxed because
         ' the second and third Show method declaration arguments expect type Object.

         Show("Boolean:  ", a1, a2, a1.CompareTo(a2), a1.CompareTo(CObj(a2)))
         Show("Byte:     ", b1, b2, b1.CompareTo(b2), b1.CompareTo(CObj(b2)))
         Show("Int16:    ", c1, c2, c1.CompareTo(c2), c1.CompareTo(CObj(c2)))
         Show("Int32:    ", d1, d2, d1.CompareTo(d2), d1.CompareTo(CObj(d2)))
         Show("Int64:    ", e1, e2, e1.CompareTo(e2), e1.CompareTo(CObj(e2)))
         Show("Decimal:  ", f1, f2, f1.CompareTo(f2), f1.CompareTo(CObj(f2)))
         Show("Single:   ", g1, g2, g1.CompareTo(g2), g1.CompareTo(CObj(g2)))
         Show("Double:   ", h1, h2, h1.CompareTo(h2), h1.CompareTo(CObj(h2)))
         Show("Char:     ", i1, i2, i1.CompareTo(i2), i1.CompareTo(CObj(i2)))
         Show("String:   ", j1, j2, j1.CompareTo(j2), j1.CompareTo(CObj(j2)))
         Show("DateTime: ", k1, k2, k1.CompareTo(k2), k1.CompareTo(CObj(k2)))
         Show("TimeSpan: ", l1, l2, l1.CompareTo(l2), l1.CompareTo(CObj(l2)))
         Show("Version:  ", m1, m2, m1.CompareTo(m2), m1.CompareTo(CObj(m2)))
         Show("Guid:     ", n1, n2, n1.CompareTo(n2), n1.CompareTo(CObj(n2)))
         '
         Console.WriteLine("{0}The following types are not CLS-compliant:", nl)
         Console.WriteLine("SByte, UInt16, UInt32, UInt64")

      Catch e As Exception
         Console.WriteLine(e)
      End Try
   End Sub
   
   Public Shared Sub Show(caption As String, var1 As [Object], var2 As [Object], _
                          resultGeneric As Integer, resultNonGeneric As Integer)
      Dim relation As String
      
      Console.Write(caption)
      If resultGeneric = resultNonGeneric Then
         If resultGeneric < 0 Then
            relation = "less than"
         ElseIf resultGeneric > 0 Then
            relation = "greater than"
         Else
            relation = "equal to"
         End If
         Console.WriteLine("{0} is {1} {2}", var1, relation, var2)
      
      ' The following condition will never occur because the generic and non-generic
      ' CompareTo methods are equivalent.

      Else
         Console.WriteLine("Generic CompareTo = {0}; non-generic CompareTo = {1}", _
                            resultGeneric, resultNonGeneric)
      End If
   End Sub
End Class
'
'This example produces the following results:
'
'The following is the result of using the generic and non-generic versions of the
'CompareTo method for several base types:
'
'Boolean:  True is equal to True
'Byte:     1 is equal to 1
'Int16:    -2 is less than 2
'Int32:    3 is equal to 3
'Int64:    4 is greater than -4
'Decimal:  -5.5 is less than 5.5
'Single:   6.6 is equal to 6.6
'Double:   7.7 is greater than -7.7
'Char:     A is equal to A
'String:   abc is equal to abc
'DateTime: 12/1/2003 5:37:46 PM is equal to 12/1/2003 5:37:46 PM
'TimeSpan: 11.22:33:44 is equal to 11.22:33:44
'Version:  1.2.333.4 is less than 2.0
'Guid:     ca761232-ed42-11ce-bacd-00aa0057b223 is equal to ca761232-ed42-11ce-bacd-00
'aa0057b223
'
'The following types are not CLS-compliant:
'SByte, UInt16, UInt32, UInt64
'

Hinweise

Diese Methode führt einen Vergleich mit der aktuellen Kultur durch (Unterscheidung nach Groß-/Kleinschreibung und Kultur sensitiv).This method performs a word (case-sensitive and culture-sensitive) comparison using the current culture. Weitere Informationen zu Wort-, Zeichen folgen-und ordinalsortierungen finden Sie unter System.Globalization.CompareOptions.For more information about word, string, and ordinal sorts, see System.Globalization.CompareOptions.

Achtung

Die CompareTo-Methode wurde hauptsächlich für die Verwendung in Sortier-oder alphabetisierungsvorgängen entwickelt.The CompareTo method was designed primarily for use in sorting or alphabetizing operations. Er sollte nicht verwendet werden, wenn der primäre Zweck des Methoden Aufrufes ist, zu bestimmen, ob zwei Zeichen folgen äquivalent sind.It should not be used when the primary purpose of the method call is to determine whether two strings are equivalent. Um zu ermitteln, ob zwei Zeichen folgen äquivalent sind, müssen Sie die Equals-Methode abrufen.To determine whether two strings are equivalent, call the Equals method.

Weitere Informationen zum Verhalten dieser Methode finden Sie im Abschnitt "Hinweise" der Compare(String, String)-Methode.For more information about the behavior of this method, see the Remarks section of the Compare(String, String) method.

Diese Methode implementiert die System.IComparable<T>-Schnittstelle und bietet eine etwas bessere Leistung als die String.CompareTo(Object)-Methode, da Sie nicht bestimmen muss, ob das strB-Argument ein änderbarer Werttyp ist, der geschachtelt werden muss, und der Parameter muss nicht aus einer Object in eine Stringumgewandelt werden.This method implements the System.IComparable<T> interface and performs slightly better than the String.CompareTo(Object) method, because it does not have to determine whether the strB argument is a mutable value type that must be boxed, and it does not have to cast its parameter from an Object to a String.

Hinweise für Aufrufer

Zeichensätze enthalten ignorierbare Zeichen.Character sets include ignorable characters. Die CompareTo(String)-Methode berücksichtigt solche Zeichen nicht, wenn Sie einen Kultur abhängigen Vergleich durchführt.The CompareTo(String) method does not consider such characters when it performs a culture-sensitive comparison. Wenn der folgende Code z. b. auf der .NET Framework 4.NET Framework 4 oder später ausgeführt wird, gibt ein Vergleich von "Animal" mit "Ani-mal" (mit einem weichen Bindestrich oder "U + 00ad") an, dass die beiden Zeichen folgen äquivalent sind.For example, if the following code is run on the .NET Framework 4.NET Framework 4 or later, a comparison of "animal" with "ani-mal" (using a soft hyphen, or U+00AD) indicates that the two strings are equivalent.

[! Code-csharpSystem. String. CompareTo # 2] [! Code-vbSystem. String. CompareTo # 2][!code-csharpSystem.String.CompareTo#2] [!code-vbSystem.String.CompareTo#2] Um Ignorable-Zeichen in einem Zeichen folgen Vergleich zu erkennen, müssen Sie die CompareOrdinal(String, String)-Methode abrufen.To recognize ignorable characters in a string comparison, call the CompareOrdinal(String, String) method.

Siehe auch

Gilt für: