EventWaitHandle.OpenExisting Methode

Definition

Öffnet ein bestimmtes benanntes Synchronisierungsereignis, wenn es bereits vorhanden ist.Opens a specified named synchronization event, if it already exists.

Überlädt

OpenExisting(String)

Öffnet das bestimmte benannte Synchronisierungsereignis, wenn es bereits vorhanden ist.Opens the specified named synchronization event, if it already exists.

OpenExisting(String, EventWaitHandleRights)

Öffnet das angegebene benannte Synchronisierungsereignis, wenn es bereits vorhanden ist, mit dem gewünschten Sicherheitszugriff.Opens the specified named synchronization event, if it already exists, with the desired security access.

OpenExisting(String)

Öffnet das bestimmte benannte Synchronisierungsereignis, wenn es bereits vorhanden ist.Opens the specified named synchronization event, if it already exists.

public:
 static System::Threading::EventWaitHandle ^ OpenExisting(System::String ^ name);
[System.Security.SecurityCritical]
public static System.Threading.EventWaitHandle OpenExisting (string name);
static member OpenExisting : string -> System.Threading.EventWaitHandle
Public Shared Function OpenExisting (name As String) As EventWaitHandle

Parameter

name
String

Der Name des zu öffnenden Systemsynchronisierungsereignisses.The name of the system synchronization event to open.

Gibt zurück

Ein Objekt, das das benannte Systemereignis darstellt.An object that represents the named system event.

Attribute

Ausnahmen

name ist eine leere Zeichenfolge.name is an empty string.

- oder --or- name ist länger als 260 Zeichen.name is longer than 260 characters.

name ist null.name is null.

Das benannte Systemereignis ist nicht vorhanden.The named system event does not exist.

Win32-Fehler.A Win32 error occurred.

Das benannte Ereignis ist vorhanden, der Benutzer verfügt jedoch nicht über den nötigen Sicherheitszugriff, um es zu verwenden.The named event exists, but the user does not have the security access required to use it.

Beispiele

Im folgenden Codebeispiel wird das prozessübergreifende Verhalten eines benannten System Ereignisses mit Zugriffs Steuerungs Sicherheit veranschaulicht.The following code example demonstrates the cross-process behavior of a named system event with access control security. Im Beispiel wird die OpenExisting(String)-Methoden Überladung verwendet, um zu testen, ob ein benanntes Ereignis vorhanden ist.The example uses the OpenExisting(String) method overload to test for the existence of a named event.

Wenn das Ereignis nicht vorhanden ist, wird es mit dem anfänglichen Besitz und der Zugriffs Steuerungs Sicherheit erstellt, die dem aktuellen Benutzer das Recht verweigert, das Ereignis zu verwenden, gewährt jedoch das Recht, Lese-und Änderungs Berechtigungen für das Ereignis zu erteilen.If the event does not exist, it is created with initial ownership and access control security that denies the current user the right to use the event, but grants the right to read and change permissions on the event.

Wenn Sie das kompilierte Beispiel aus zwei Befehls Fenstern ausführen, löst die zweite Kopie beim Aufrufen von OpenExisting(String)eine Zugriffs Verletzungs Ausnahme aus.If you run the compiled example from two command windows, the second copy will throw an access violation exception on the call to OpenExisting(String). Die Ausnahme wird abgefangen, und das Beispiel verwendet die OpenExisting(String, EventWaitHandleRights)-Methoden Überladung, um auf das Ereignis mit den rechten zu warten, die zum Lesen und Ändern der Berechtigungen erforderlich sind.The exception is caught, and the example uses the OpenExisting(String, EventWaitHandleRights) method overload to wait on the event with the rights needed to read and change the permissions.

Nachdem die Berechtigungen geändert wurden, wird das Ereignis mit den Rechten geöffnet, die erforderlich sind, um darauf zu warten und es zu signalisieren.After the permissions are changed, the event is opened with the rights required to wait on it and signal it. Wenn Sie das kompilierte Beispiel aus einem dritten Befehlsfenster ausführen, wird das Beispiel mithilfe der neuen Berechtigungen ausgeführt.If you run the compiled example from a third command window, the example runs using the new permissions.

using namespace System;
using namespace System::Threading;
using namespace System::Security::AccessControl;
using namespace System::Security::Permissions;

public ref class Example
{
public:
   [SecurityPermissionAttribute(SecurityAction::Demand,Flags=SecurityPermissionFlag::UnmanagedCode)]
   static void Main()
   {
      String^ ewhName = L"EventWaitHandleExample5";

      EventWaitHandle^ ewh = nullptr;
      bool doesNotExist = false;
      bool unauthorized = false;
      
      // The value of this variable is set by the event
      // constructor. It is true if the named system event was
      // created, and false if the named event already existed.
      //
      bool wasCreated;
      
      // Attempt to open the named event.
      try
      {
         // Open the event with (EventWaitHandleRights.Synchronize
         // | EventWaitHandleRights.Modify), to wait on and
         // signal the named event.
         //
         ewh = EventWaitHandle::OpenExisting( ewhName );
      }
      catch ( WaitHandleCannotBeOpenedException^ ) 
      {
         Console::WriteLine( L"Named event does not exist." );
         doesNotExist = true;
      }
      catch ( UnauthorizedAccessException^ ex ) 
      {
         Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
         unauthorized = true;
      }

      // There are three cases: (1) The event does not exist.
      // (2) The event exists, but the current user doesn't
      // have access. (3) The event exists and the user has
      // access.
      //
      if ( doesNotExist )
      {
         // The event does not exist, so create it.

         // Create an access control list (ACL) that denies the
         // current user the right to wait on or signal the
         // event, but allows the right to read and change
         // security information for the event.
         //
         String^ user = String::Concat( Environment::UserDomainName, L"\\",
            Environment::UserName );
         EventWaitHandleSecurity^ ewhSec = gcnew EventWaitHandleSecurity;
         //following constructor fails
         EventWaitHandleAccessRule^ rule = gcnew EventWaitHandleAccessRule(
            user,
            static_cast<EventWaitHandleRights>(
               EventWaitHandleRights::Synchronize | 
               EventWaitHandleRights::Modify),
            AccessControlType::Deny );
         ewhSec->AddAccessRule( rule );

         rule = gcnew EventWaitHandleAccessRule( user,
            static_cast<EventWaitHandleRights>(
               EventWaitHandleRights::ReadPermissions | 
               EventWaitHandleRights::ChangePermissions),
            AccessControlType::Allow );
         ewhSec->AddAccessRule( rule );
         
         // Create an EventWaitHandle object that represents
         // the system event named by the constant 'ewhName',
         // initially signaled, with automatic reset, and with
         // the specified security access. The Boolean value that
         // indicates creation of the underlying system object
         // is placed in wasCreated.
         //
         ewh = gcnew EventWaitHandle( true,
            EventResetMode::AutoReset,
            ewhName,
            wasCreated,
            ewhSec );
         
         // If the named system event was created, it can be
         // used by the current instance of this program, even
         // though the current user is denied access. The current
         // program owns the event. Otherwise, exit the program.
         //
         if ( wasCreated )
         {
            Console::WriteLine( L"Created the named event." );
         }
         else
         {
            Console::WriteLine( L"Unable to create the event." );
            return;
         }
      }
      else if ( unauthorized )
      {
         // Open the event to read and change the access control
         // security. The access control security defined above
         // allows the current user to do this.
         //
         try
         {
            ewh = EventWaitHandle::OpenExisting( ewhName, 
               static_cast<EventWaitHandleRights>(
                  EventWaitHandleRights::ReadPermissions |
                  EventWaitHandleRights::ChangePermissions) );
            
            // Get the current ACL. This requires
            // EventWaitHandleRights.ReadPermissions.
            EventWaitHandleSecurity^ ewhSec = ewh->GetAccessControl();
            String^ user = String::Concat( Environment::UserDomainName, L"\\",
               Environment::UserName );
            
            // First, the rule that denied the current user
            // the right to enter and release the event must
            // be removed.
            EventWaitHandleAccessRule^ rule = gcnew EventWaitHandleAccessRule(
               user,
               static_cast<EventWaitHandleRights>(
                  EventWaitHandleRights::Synchronize |
                  EventWaitHandleRights::Modify),
               AccessControlType::Deny );
            ewhSec->RemoveAccessRule( rule );
            
            // Now grant the user the correct rights.
            //
            rule = gcnew EventWaitHandleAccessRule( user,
               static_cast<EventWaitHandleRights>(
                  EventWaitHandleRights::Synchronize |
                  EventWaitHandleRights::Modify),
               AccessControlType::Allow );
            ewhSec->AddAccessRule( rule );
            
            // Update the ACL. This requires
            // EventWaitHandleRights.ChangePermissions.
            ewh->SetAccessControl( ewhSec );
            Console::WriteLine( L"Updated event security." );
            
            // Open the event with (EventWaitHandleRights.Synchronize
            // | EventWaitHandleRights.Modify), the rights required
            // to wait on and signal the event.
            //
            ewh = EventWaitHandle::OpenExisting( ewhName );
         }
         catch ( UnauthorizedAccessException^ ex ) 
         {
            Console::WriteLine( L"Unable to change permissions: {0}",
               ex->Message );
            return;
         }

      }
      
      // Wait on the event, and hold it until the program
      // exits.
      //
      try
      {
         Console::WriteLine( L"Wait on the event." );
         ewh->WaitOne();
         Console::WriteLine( L"Event was signaled." );
         Console::WriteLine( L"Press the Enter key to signal the event and exit." );
         Console::ReadLine();
      }
      catch ( UnauthorizedAccessException^ ex ) 
      {
         Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
      }
      finally
      {
         ewh->Set();
      }
   }
};

int main()
{
   Example::Main();
}
using System;
using System.Threading;
using System.Security.AccessControl;

internal class Example
{
    internal static void Main()
    {
        const string ewhName = "EventWaitHandleExample5";

        EventWaitHandle ewh = null;
        bool doesNotExist = false;
        bool unauthorized = false;

        // The value of this variable is set by the event
        // constructor. It is true if the named system event was
        // created, and false if the named event already existed.
        //
        bool wasCreated;

        // Attempt to open the named event.
        try
        {
            // Open the event with (EventWaitHandleRights.Synchronize
            // | EventWaitHandleRights.Modify), to wait on and 
            // signal the named event.
            //
            ewh = EventWaitHandle.OpenExisting(ewhName);
        }
        catch (WaitHandleCannotBeOpenedException)
        {
            Console.WriteLine("Named event does not exist.");
            doesNotExist = true;
        }
        catch (UnauthorizedAccessException ex)
        {
            Console.WriteLine("Unauthorized access: {0}", ex.Message);
            unauthorized = true;
        }

        // There are three cases: (1) The event does not exist.
        // (2) The event exists, but the current user doesn't 
        // have access. (3) The event exists and the user has
        // access.
        //
        if (doesNotExist)
        {
            // The event does not exist, so create it.

            // Create an access control list (ACL) that denies the
            // current user the right to wait on or signal the 
            // event, but allows the right to read and change
            // security information for the event.
            //
            string user = Environment.UserDomainName + "\\"
                + Environment.UserName;
            EventWaitHandleSecurity ewhSec = 
                new EventWaitHandleSecurity();

            EventWaitHandleAccessRule rule = 
                new EventWaitHandleAccessRule(user, 
                    EventWaitHandleRights.Synchronize | 
                    EventWaitHandleRights.Modify, 
                    AccessControlType.Deny);
            ewhSec.AddAccessRule(rule);

            rule = new EventWaitHandleAccessRule(user, 
                EventWaitHandleRights.ReadPermissions | 
                EventWaitHandleRights.ChangePermissions, 
                AccessControlType.Allow);
            ewhSec.AddAccessRule(rule);

            // Create an EventWaitHandle object that represents
            // the system event named by the constant 'ewhName', 
            // initially signaled, with automatic reset, and with
            // the specified security access. The Boolean value that 
            // indicates creation of the underlying system object
            // is placed in wasCreated.
            //
            ewh = new EventWaitHandle(true, 
                EventResetMode.AutoReset, 
                ewhName, 
                out wasCreated, 
                ewhSec);

            // If the named system event was created, it can be
            // used by the current instance of this program, even 
            // though the current user is denied access. The current
            // program owns the event. Otherwise, exit the program.
            // 
            if (wasCreated)
            {
                Console.WriteLine("Created the named event.");
            }
            else
            {
                Console.WriteLine("Unable to create the event.");
                return;
            }
        }
        else if (unauthorized)
        {
            // Open the event to read and change the access control
            // security. The access control security defined above
            // allows the current user to do this.
            //
            try
            {
                ewh = EventWaitHandle.OpenExisting(ewhName, 
                    EventWaitHandleRights.ReadPermissions | 
                    EventWaitHandleRights.ChangePermissions);

                // Get the current ACL. This requires 
                // EventWaitHandleRights.ReadPermissions.
                EventWaitHandleSecurity ewhSec = ewh.GetAccessControl();
                
                string user = Environment.UserDomainName + "\\"
                    + Environment.UserName;

                // First, the rule that denied the current user 
                // the right to enter and release the event must
                // be removed.
                EventWaitHandleAccessRule rule = 
                    new EventWaitHandleAccessRule(user, 
                        EventWaitHandleRights.Synchronize | 
                        EventWaitHandleRights.Modify, 
                        AccessControlType.Deny);
                ewhSec.RemoveAccessRule(rule);

                // Now grant the user the correct rights.
                // 
                rule = new EventWaitHandleAccessRule(user, 
                    EventWaitHandleRights.Synchronize | 
                    EventWaitHandleRights.Modify, 
                    AccessControlType.Allow);
                ewhSec.AddAccessRule(rule);

                // Update the ACL. This requires
                // EventWaitHandleRights.ChangePermissions.
                ewh.SetAccessControl(ewhSec);

                Console.WriteLine("Updated event security.");

                // Open the event with (EventWaitHandleRights.Synchronize 
                // | EventWaitHandleRights.Modify), the rights required
                // to wait on and signal the event.
                //
                ewh = EventWaitHandle.OpenExisting(ewhName);
            }
            catch (UnauthorizedAccessException ex)
            {
                Console.WriteLine("Unable to change permissions: {0}",
                    ex.Message);
                return;
            }
        }

        // Wait on the event, and hold it until the program
        // exits.
        //
        try
        {
            Console.WriteLine("Wait on the event.");
            ewh.WaitOne();
            Console.WriteLine("Event was signaled.");
            Console.WriteLine("Press the Enter key to signal the event and exit.");
            Console.ReadLine();
        }
        catch (UnauthorizedAccessException ex)
        {
            Console.WriteLine("Unauthorized access: {0}", ex.Message);
        }
        finally
        {
            ewh.Set();
        }
    }
}
Imports System.Threading
Imports System.Security.AccessControl

Friend Class Example

    <MTAThread> _
    Friend Shared Sub Main()
        Const ewhName As String = "EventWaitHandleExample5"

        Dim ewh As EventWaitHandle = Nothing
        Dim doesNotExist as Boolean = False
        Dim unauthorized As Boolean = False

        ' The value of this variable is set by the event
        ' constructor. It is True if the named system event was
        ' created, and False if the named event already existed.
        '
        Dim wasCreated As Boolean

        ' Attempt to open the named event.
        Try
            ' Open the event with (EventWaitHandleRights.Synchronize
            ' Or EventWaitHandleRights.Modify), to wait on and 
            ' signal the named event.
            '
            ewh = EventWaitHandle.OpenExisting(ewhName)
        Catch ex As WaitHandleCannotBeOpenedException
            Console.WriteLine("Named event does not exist.")
            doesNotExist = True
        Catch ex As UnauthorizedAccessException
            Console.WriteLine("Unauthorized access: {0}", ex.Message)
            unauthorized = True
        End Try

        ' There are three cases: (1) The event does not exist.
        ' (2) The event exists, but the current user doesn't 
        ' have access. (3) The event exists and the user has
        ' access.
        '
        If doesNotExist Then
            ' The event does not exist, so create it.

            ' Create an access control list (ACL) that denies the
            ' current user the right to wait on or signal the 
            ' event, but allows the right to read and change
            ' security information for the event.
            '
            Dim user As String = Environment.UserDomainName _ 
                & "\" & Environment.UserName
            Dim ewhSec As New EventWaitHandleSecurity()

            Dim rule As New EventWaitHandleAccessRule(user, _
                EventWaitHandleRights.Synchronize Or _
                EventWaitHandleRights.Modify, _
                AccessControlType.Deny)
            ewhSec.AddAccessRule(rule)

            rule = New EventWaitHandleAccessRule(user, _
                EventWaitHandleRights.ReadPermissions Or _
                EventWaitHandleRights.ChangePermissions, _
                AccessControlType.Allow)
            ewhSec.AddAccessRule(rule)

            ' Create an EventWaitHandle object that represents
            ' the system event named by the constant 'ewhName', 
            ' initially signaled, with automatic reset, and with
            ' the specified security access. The Boolean value that 
            ' indicates creation of the underlying system object
            ' is placed in wasCreated.
            '
            ewh = New EventWaitHandle(True, _
                EventResetMode.AutoReset, ewhName, _
                wasCreated, ewhSec)

            ' If the named system event was created, it can be
            ' used by the current instance of this program, even 
            ' though the current user is denied access. The current
            ' program owns the event. Otherwise, exit the program.
            ' 
            If wasCreated Then
                Console.WriteLine("Created the named event.")
            Else
                Console.WriteLine("Unable to create the event.")
                Return
            End If

        ElseIf unauthorized Then

            ' Open the event to read and change the access control
            ' security. The access control security defined above
            ' allows the current user to do this.
            '
            Try
                ewh = EventWaitHandle.OpenExisting(ewhName, _
                    EventWaitHandleRights.ReadPermissions Or _
                    EventWaitHandleRights.ChangePermissions)

                ' Get the current ACL. This requires 
                ' EventWaitHandleRights.ReadPermissions.
                Dim ewhSec As EventWaitHandleSecurity = _
                    ewh.GetAccessControl()
                
                Dim user As String = Environment.UserDomainName _ 
                    & "\" & Environment.UserName

                ' First, the rule that denied the current user 
                ' the right to enter and release the event must
                ' be removed.
                Dim rule As New EventWaitHandleAccessRule(user, _
                    EventWaitHandleRights.Synchronize Or _
                    EventWaitHandleRights.Modify, _
                    AccessControlType.Deny)
                ewhSec.RemoveAccessRule(rule)

                ' Now grant the user the correct rights.
                ' 
                rule = New EventWaitHandleAccessRule(user, _
                    EventWaitHandleRights.Synchronize Or _
                    EventWaitHandleRights.Modify, _
                    AccessControlType.Allow)
                ewhSec.AddAccessRule(rule)

                ' Update the ACL. This requires
                ' EventWaitHandleRights.ChangePermissions.
                ewh.SetAccessControl(ewhSec)

                Console.WriteLine("Updated event security.")

                ' Open the event with (EventWaitHandleRights.Synchronize 
                ' Or EventWaitHandleRights.Modify), the rights required
                ' to wait on and signal the event.
                '
                ewh = EventWaitHandle.OpenExisting(ewhName)

            Catch ex As UnauthorizedAccessException
                Console.WriteLine("Unable to change permissions: {0}", _
                    ex.Message)
                Return
            End Try

        End If

        ' Wait on the event, and hold it until the program
        ' exits.
        '
        Try
            Console.WriteLine("Wait on the event.")
            ewh.WaitOne()
            Console.WriteLine("Event was signaled.")
            Console.WriteLine("Press the Enter key to signal the event and exit.")
            Console.ReadLine()
        Catch ex As UnauthorizedAccessException
            Console.WriteLine("Unauthorized access: {0}", _
                ex.Message)
        Finally
            ewh.Set()
        End Try
    End Sub 
End Class 

Hinweise

Die OpenExisting-Methode versucht, das angegebene benannte System Ereignis zu öffnen.The OpenExisting method tries to open the specified named system event. Wenn das System Ereignis nicht vorhanden ist, löst diese Methode eine Ausnahme aus, statt das System Ereignis zu erstellen.If the system event does not exist, this method throws an exception instead of creating the system event. Um das System Ereignis zu erstellen, wenn es nicht bereits vorhanden ist, verwenden Sie einen der EventWaitHandle Konstruktoren mit einem name-Parameter.To create the system event when it does not already exist, use one of the EventWaitHandle constructors that has a name parameter.

Mehrere Aufrufe dieser Methode, die denselben Wert für name verwenden, geben nicht notwendigerweise dasselbe EventWaitHandle Objekt zurück, auch wenn die zurückgegebenen Objekte dasselbe benannte System Ereignis darstellen.Multiple calls to this method that use the same value for name do not necessarily return the same EventWaitHandle object, even though the objects that are returned represent the same named system event.

Diese Methoden Überladung entspricht dem Aufrufen der OpenExisting(String, EventWaitHandleRights)-Methoden Überladung und der Angabe von EventWaitHandleRights.Synchronize und EventWaitHandleRights.Modify rechten, kombiniert mithilfe des bitweisen OR-Vorgangs.This method overload is equivalent to calling the OpenExisting(String, EventWaitHandleRights) method overload and specifying EventWaitHandleRights.Synchronize and EventWaitHandleRights.Modify rights, combined by using the bitwise OR operation.

Das Angeben des EventWaitHandleRights.Synchronize Flags ermöglicht einem Thread, auf das benannte System Ereignis zu warten, und die Angabe des EventWaitHandleRights.Modify Flags ermöglicht einem Thread, die Set-und Reset Methoden aufzurufen.Specifying the EventWaitHandleRights.Synchronize flag allows a thread to wait on the named system event, and specifying the EventWaitHandleRights.Modify flag allows a thread to call the Set and Reset methods.

Sicherheit

SecurityCriticalAttribute
Erfordert volle Vertrauenswürdigkeit für den unmittelbaren Aufrufer.Requires full trust for the immediate caller. Dieser Member kann nicht von teilweise vertrauenswürdigem oder transparentem Code verwendet werden.This member cannot be used by partially trusted or transparent code.

Siehe auch

OpenExisting(String, EventWaitHandleRights)

Öffnet das angegebene benannte Synchronisierungsereignis, wenn es bereits vorhanden ist, mit dem gewünschten Sicherheitszugriff.Opens the specified named synchronization event, if it already exists, with the desired security access.

public:
 static System::Threading::EventWaitHandle ^ OpenExisting(System::String ^ name, System::Security::AccessControl::EventWaitHandleRights rights);
[System.Security.SecurityCritical]
public static System.Threading.EventWaitHandle OpenExisting (string name, System.Security.AccessControl.EventWaitHandleRights rights);
static member OpenExisting : string * System.Security.AccessControl.EventWaitHandleRights -> System.Threading.EventWaitHandle
Public Shared Function OpenExisting (name As String, rights As EventWaitHandleRights) As EventWaitHandle

Parameter

name
String

Der Name des zu öffnenden Systemsynchronisierungsereignisses.The name of the system synchronization event to open.

rights
EventWaitHandleRights

Eine bitweise Kombination von Enumerationswerten, die die gewünschten Sicherheitszugriffsrechte darstellen.A bitwise combination of the enumeration values that represent the desired security access.

Gibt zurück

Ein Objekt, das das benannte Systemereignis darstellt.An object that represents the named system event.

Attribute

Ausnahmen

name ist eine leere Zeichenfolge.name is an empty string.

- oder --or- name ist länger als 260 Zeichen.name is longer than 260 characters.

name ist null.name is null.

Das benannte Systemereignis ist nicht vorhanden.The named system event does not exist.

Win32-Fehler.A Win32 error occurred.

Das benannte Ereignis ist vorhanden, aber der Benutzer verfügt nicht über den erforderlichen Sicherheitszugriff.The named event exists, but the user does not have the desired security access.

Beispiele

Im folgenden Codebeispiel wird das prozessübergreifende Verhalten eines benannten System Ereignisses mit Zugriffs Steuerungs Sicherheit veranschaulicht.The following code example demonstrates the cross-process behavior of a named system event with access control security. Im Beispiel wird die OpenExisting(String)-Methoden Überladung verwendet, um zu testen, ob ein benanntes Ereignis vorhanden ist.The example uses the OpenExisting(String) method overload to test for the existence of a named event.

Wenn das Ereignis nicht vorhanden ist, wird es mit dem anfänglichen Besitz und der Zugriffs Steuerungs Sicherheit erstellt, die dem aktuellen Benutzer das Recht verweigert, das Ereignis zu verwenden, gewährt jedoch das Recht, Lese-und Änderungs Berechtigungen für das Ereignis zu erteilen.If the event does not exist, it is created with initial ownership and access control security that denies the current user the right to use the event, but grants the right to read and change permissions on the event.

Wenn Sie das kompilierte Beispiel aus zwei Befehls Fenstern ausführen, löst die zweite Kopie beim Aufrufen von OpenExisting(String)eine Zugriffs Verletzungs Ausnahme aus.If you run the compiled example from two command windows, the second copy will throw an access violation exception on the call to OpenExisting(String). Die Ausnahme wird abgefangen, und das Beispiel verwendet die OpenExisting(String, EventWaitHandleRights)-Methoden Überladung, um auf das Ereignis mit den rechten zu warten, die zum Lesen und Ändern der Berechtigungen erforderlich sind.The exception is caught, and the example uses the OpenExisting(String, EventWaitHandleRights) method overload to wait on the event with the rights needed to read and change the permissions.

Nachdem die Berechtigungen geändert wurden, wird das Ereignis mit den Rechten geöffnet, die erforderlich sind, um darauf zu warten und es zu signalisieren.After the permissions are changed, the event is opened with the rights required to wait on it and signal it. Wenn Sie das kompilierte Beispiel aus einem dritten Befehlsfenster ausführen, wird das Beispiel mithilfe der neuen Berechtigungen ausgeführt.If you run the compiled example from a third command window, the example runs using the new permissions.

using namespace System;
using namespace System::Threading;
using namespace System::Security::AccessControl;
using namespace System::Security::Permissions;

public ref class Example
{
public:
   [SecurityPermissionAttribute(SecurityAction::Demand,Flags=SecurityPermissionFlag::UnmanagedCode)]
   static void Main()
   {
      String^ ewhName = L"EventWaitHandleExample5";

      EventWaitHandle^ ewh = nullptr;
      bool doesNotExist = false;
      bool unauthorized = false;
      
      // The value of this variable is set by the event
      // constructor. It is true if the named system event was
      // created, and false if the named event already existed.
      //
      bool wasCreated;
      
      // Attempt to open the named event.
      try
      {
         // Open the event with (EventWaitHandleRights.Synchronize
         // | EventWaitHandleRights.Modify), to wait on and
         // signal the named event.
         //
         ewh = EventWaitHandle::OpenExisting( ewhName );
      }
      catch ( WaitHandleCannotBeOpenedException^ ) 
      {
         Console::WriteLine( L"Named event does not exist." );
         doesNotExist = true;
      }
      catch ( UnauthorizedAccessException^ ex ) 
      {
         Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
         unauthorized = true;
      }

      // There are three cases: (1) The event does not exist.
      // (2) The event exists, but the current user doesn't
      // have access. (3) The event exists and the user has
      // access.
      //
      if ( doesNotExist )
      {
         // The event does not exist, so create it.

         // Create an access control list (ACL) that denies the
         // current user the right to wait on or signal the
         // event, but allows the right to read and change
         // security information for the event.
         //
         String^ user = String::Concat( Environment::UserDomainName, L"\\",
            Environment::UserName );
         EventWaitHandleSecurity^ ewhSec = gcnew EventWaitHandleSecurity;
         //following constructor fails
         EventWaitHandleAccessRule^ rule = gcnew EventWaitHandleAccessRule(
            user,
            static_cast<EventWaitHandleRights>(
               EventWaitHandleRights::Synchronize | 
               EventWaitHandleRights::Modify),
            AccessControlType::Deny );
         ewhSec->AddAccessRule( rule );

         rule = gcnew EventWaitHandleAccessRule( user,
            static_cast<EventWaitHandleRights>(
               EventWaitHandleRights::ReadPermissions | 
               EventWaitHandleRights::ChangePermissions),
            AccessControlType::Allow );
         ewhSec->AddAccessRule( rule );
         
         // Create an EventWaitHandle object that represents
         // the system event named by the constant 'ewhName',
         // initially signaled, with automatic reset, and with
         // the specified security access. The Boolean value that
         // indicates creation of the underlying system object
         // is placed in wasCreated.
         //
         ewh = gcnew EventWaitHandle( true,
            EventResetMode::AutoReset,
            ewhName,
            wasCreated,
            ewhSec );
         
         // If the named system event was created, it can be
         // used by the current instance of this program, even
         // though the current user is denied access. The current
         // program owns the event. Otherwise, exit the program.
         //
         if ( wasCreated )
         {
            Console::WriteLine( L"Created the named event." );
         }
         else
         {
            Console::WriteLine( L"Unable to create the event." );
            return;
         }
      }
      else if ( unauthorized )
      {
         // Open the event to read and change the access control
         // security. The access control security defined above
         // allows the current user to do this.
         //
         try
         {
            ewh = EventWaitHandle::OpenExisting( ewhName, 
               static_cast<EventWaitHandleRights>(
                  EventWaitHandleRights::ReadPermissions |
                  EventWaitHandleRights::ChangePermissions) );
            
            // Get the current ACL. This requires
            // EventWaitHandleRights.ReadPermissions.
            EventWaitHandleSecurity^ ewhSec = ewh->GetAccessControl();
            String^ user = String::Concat( Environment::UserDomainName, L"\\",
               Environment::UserName );
            
            // First, the rule that denied the current user
            // the right to enter and release the event must
            // be removed.
            EventWaitHandleAccessRule^ rule = gcnew EventWaitHandleAccessRule(
               user,
               static_cast<EventWaitHandleRights>(
                  EventWaitHandleRights::Synchronize |
                  EventWaitHandleRights::Modify),
               AccessControlType::Deny );
            ewhSec->RemoveAccessRule( rule );
            
            // Now grant the user the correct rights.
            //
            rule = gcnew EventWaitHandleAccessRule( user,
               static_cast<EventWaitHandleRights>(
                  EventWaitHandleRights::Synchronize |
                  EventWaitHandleRights::Modify),
               AccessControlType::Allow );
            ewhSec->AddAccessRule( rule );
            
            // Update the ACL. This requires
            // EventWaitHandleRights.ChangePermissions.
            ewh->SetAccessControl( ewhSec );
            Console::WriteLine( L"Updated event security." );
            
            // Open the event with (EventWaitHandleRights.Synchronize
            // | EventWaitHandleRights.Modify), the rights required
            // to wait on and signal the event.
            //
            ewh = EventWaitHandle::OpenExisting( ewhName );
         }
         catch ( UnauthorizedAccessException^ ex ) 
         {
            Console::WriteLine( L"Unable to change permissions: {0}",
               ex->Message );
            return;
         }

      }
      
      // Wait on the event, and hold it until the program
      // exits.
      //
      try
      {
         Console::WriteLine( L"Wait on the event." );
         ewh->WaitOne();
         Console::WriteLine( L"Event was signaled." );
         Console::WriteLine( L"Press the Enter key to signal the event and exit." );
         Console::ReadLine();
      }
      catch ( UnauthorizedAccessException^ ex ) 
      {
         Console::WriteLine( L"Unauthorized access: {0}", ex->Message );
      }
      finally
      {
         ewh->Set();
      }
   }
};

int main()
{
   Example::Main();
}
using System;
using System.Threading;
using System.Security.AccessControl;

internal class Example
{
    internal static void Main()
    {
        const string ewhName = "EventWaitHandleExample5";

        EventWaitHandle ewh = null;
        bool doesNotExist = false;
        bool unauthorized = false;

        // The value of this variable is set by the event
        // constructor. It is true if the named system event was
        // created, and false if the named event already existed.
        //
        bool wasCreated;

        // Attempt to open the named event.
        try
        {
            // Open the event with (EventWaitHandleRights.Synchronize
            // | EventWaitHandleRights.Modify), to wait on and 
            // signal the named event.
            //
            ewh = EventWaitHandle.OpenExisting(ewhName);
        }
        catch (WaitHandleCannotBeOpenedException)
        {
            Console.WriteLine("Named event does not exist.");
            doesNotExist = true;
        }
        catch (UnauthorizedAccessException ex)
        {
            Console.WriteLine("Unauthorized access: {0}", ex.Message);
            unauthorized = true;
        }

        // There are three cases: (1) The event does not exist.
        // (2) The event exists, but the current user doesn't 
        // have access. (3) The event exists and the user has
        // access.
        //
        if (doesNotExist)
        {
            // The event does not exist, so create it.

            // Create an access control list (ACL) that denies the
            // current user the right to wait on or signal the 
            // event, but allows the right to read and change
            // security information for the event.
            //
            string user = Environment.UserDomainName + "\\"
                + Environment.UserName;
            EventWaitHandleSecurity ewhSec = 
                new EventWaitHandleSecurity();

            EventWaitHandleAccessRule rule = 
                new EventWaitHandleAccessRule(user, 
                    EventWaitHandleRights.Synchronize | 
                    EventWaitHandleRights.Modify, 
                    AccessControlType.Deny);
            ewhSec.AddAccessRule(rule);

            rule = new EventWaitHandleAccessRule(user, 
                EventWaitHandleRights.ReadPermissions | 
                EventWaitHandleRights.ChangePermissions, 
                AccessControlType.Allow);
            ewhSec.AddAccessRule(rule);

            // Create an EventWaitHandle object that represents
            // the system event named by the constant 'ewhName', 
            // initially signaled, with automatic reset, and with
            // the specified security access. The Boolean value that 
            // indicates creation of the underlying system object
            // is placed in wasCreated.
            //
            ewh = new EventWaitHandle(true, 
                EventResetMode.AutoReset, 
                ewhName, 
                out wasCreated, 
                ewhSec);

            // If the named system event was created, it can be
            // used by the current instance of this program, even 
            // though the current user is denied access. The current
            // program owns the event. Otherwise, exit the program.
            // 
            if (wasCreated)
            {
                Console.WriteLine("Created the named event.");
            }
            else
            {
                Console.WriteLine("Unable to create the event.");
                return;
            }
        }
        else if (unauthorized)
        {
            // Open the event to read and change the access control
            // security. The access control security defined above
            // allows the current user to do this.
            //
            try
            {
                ewh = EventWaitHandle.OpenExisting(ewhName, 
                    EventWaitHandleRights.ReadPermissions | 
                    EventWaitHandleRights.ChangePermissions);

                // Get the current ACL. This requires 
                // EventWaitHandleRights.ReadPermissions.
                EventWaitHandleSecurity ewhSec = ewh.GetAccessControl();
                
                string user = Environment.UserDomainName + "\\"
                    + Environment.UserName;

                // First, the rule that denied the current user 
                // the right to enter and release the event must
                // be removed.
                EventWaitHandleAccessRule rule = 
                    new EventWaitHandleAccessRule(user, 
                        EventWaitHandleRights.Synchronize | 
                        EventWaitHandleRights.Modify, 
                        AccessControlType.Deny);
                ewhSec.RemoveAccessRule(rule);

                // Now grant the user the correct rights.
                // 
                rule = new EventWaitHandleAccessRule(user, 
                    EventWaitHandleRights.Synchronize | 
                    EventWaitHandleRights.Modify, 
                    AccessControlType.Allow);
                ewhSec.AddAccessRule(rule);

                // Update the ACL. This requires
                // EventWaitHandleRights.ChangePermissions.
                ewh.SetAccessControl(ewhSec);

                Console.WriteLine("Updated event security.");

                // Open the event with (EventWaitHandleRights.Synchronize 
                // | EventWaitHandleRights.Modify), the rights required
                // to wait on and signal the event.
                //
                ewh = EventWaitHandle.OpenExisting(ewhName);
            }
            catch (UnauthorizedAccessException ex)
            {
                Console.WriteLine("Unable to change permissions: {0}",
                    ex.Message);
                return;
            }
        }

        // Wait on the event, and hold it until the program
        // exits.
        //
        try
        {
            Console.WriteLine("Wait on the event.");
            ewh.WaitOne();
            Console.WriteLine("Event was signaled.");
            Console.WriteLine("Press the Enter key to signal the event and exit.");
            Console.ReadLine();
        }
        catch (UnauthorizedAccessException ex)
        {
            Console.WriteLine("Unauthorized access: {0}", ex.Message);
        }
        finally
        {
            ewh.Set();
        }
    }
}
Imports System.Threading
Imports System.Security.AccessControl

Friend Class Example

    <MTAThread> _
    Friend Shared Sub Main()
        Const ewhName As String = "EventWaitHandleExample5"

        Dim ewh As EventWaitHandle = Nothing
        Dim doesNotExist as Boolean = False
        Dim unauthorized As Boolean = False

        ' The value of this variable is set by the event
        ' constructor. It is True if the named system event was
        ' created, and False if the named event already existed.
        '
        Dim wasCreated As Boolean

        ' Attempt to open the named event.
        Try
            ' Open the event with (EventWaitHandleRights.Synchronize
            ' Or EventWaitHandleRights.Modify), to wait on and 
            ' signal the named event.
            '
            ewh = EventWaitHandle.OpenExisting(ewhName)
        Catch ex As WaitHandleCannotBeOpenedException
            Console.WriteLine("Named event does not exist.")
            doesNotExist = True
        Catch ex As UnauthorizedAccessException
            Console.WriteLine("Unauthorized access: {0}", ex.Message)
            unauthorized = True
        End Try

        ' There are three cases: (1) The event does not exist.
        ' (2) The event exists, but the current user doesn't 
        ' have access. (3) The event exists and the user has
        ' access.
        '
        If doesNotExist Then
            ' The event does not exist, so create it.

            ' Create an access control list (ACL) that denies the
            ' current user the right to wait on or signal the 
            ' event, but allows the right to read and change
            ' security information for the event.
            '
            Dim user As String = Environment.UserDomainName _ 
                & "\" & Environment.UserName
            Dim ewhSec As New EventWaitHandleSecurity()

            Dim rule As New EventWaitHandleAccessRule(user, _
                EventWaitHandleRights.Synchronize Or _
                EventWaitHandleRights.Modify, _
                AccessControlType.Deny)
            ewhSec.AddAccessRule(rule)

            rule = New EventWaitHandleAccessRule(user, _
                EventWaitHandleRights.ReadPermissions Or _
                EventWaitHandleRights.ChangePermissions, _
                AccessControlType.Allow)
            ewhSec.AddAccessRule(rule)

            ' Create an EventWaitHandle object that represents
            ' the system event named by the constant 'ewhName', 
            ' initially signaled, with automatic reset, and with
            ' the specified security access. The Boolean value that 
            ' indicates creation of the underlying system object
            ' is placed in wasCreated.
            '
            ewh = New EventWaitHandle(True, _
                EventResetMode.AutoReset, ewhName, _
                wasCreated, ewhSec)

            ' If the named system event was created, it can be
            ' used by the current instance of this program, even 
            ' though the current user is denied access. The current
            ' program owns the event. Otherwise, exit the program.
            ' 
            If wasCreated Then
                Console.WriteLine("Created the named event.")
            Else
                Console.WriteLine("Unable to create the event.")
                Return
            End If

        ElseIf unauthorized Then

            ' Open the event to read and change the access control
            ' security. The access control security defined above
            ' allows the current user to do this.
            '
            Try
                ewh = EventWaitHandle.OpenExisting(ewhName, _
                    EventWaitHandleRights.ReadPermissions Or _
                    EventWaitHandleRights.ChangePermissions)

                ' Get the current ACL. This requires 
                ' EventWaitHandleRights.ReadPermissions.
                Dim ewhSec As EventWaitHandleSecurity = _
                    ewh.GetAccessControl()
                
                Dim user As String = Environment.UserDomainName _ 
                    & "\" & Environment.UserName

                ' First, the rule that denied the current user 
                ' the right to enter and release the event must
                ' be removed.
                Dim rule As New EventWaitHandleAccessRule(user, _
                    EventWaitHandleRights.Synchronize Or _
                    EventWaitHandleRights.Modify, _
                    AccessControlType.Deny)
                ewhSec.RemoveAccessRule(rule)

                ' Now grant the user the correct rights.
                ' 
                rule = New EventWaitHandleAccessRule(user, _
                    EventWaitHandleRights.Synchronize Or _
                    EventWaitHandleRights.Modify, _
                    AccessControlType.Allow)
                ewhSec.AddAccessRule(rule)

                ' Update the ACL. This requires
                ' EventWaitHandleRights.ChangePermissions.
                ewh.SetAccessControl(ewhSec)

                Console.WriteLine("Updated event security.")

                ' Open the event with (EventWaitHandleRights.Synchronize 
                ' Or EventWaitHandleRights.Modify), the rights required
                ' to wait on and signal the event.
                '
                ewh = EventWaitHandle.OpenExisting(ewhName)

            Catch ex As UnauthorizedAccessException
                Console.WriteLine("Unable to change permissions: {0}", _
                    ex.Message)
                Return
            End Try

        End If

        ' Wait on the event, and hold it until the program
        ' exits.
        '
        Try
            Console.WriteLine("Wait on the event.")
            ewh.WaitOne()
            Console.WriteLine("Event was signaled.")
            Console.WriteLine("Press the Enter key to signal the event and exit.")
            Console.ReadLine()
        Catch ex As UnauthorizedAccessException
            Console.WriteLine("Unauthorized access: {0}", _
                ex.Message)
        Finally
            ewh.Set()
        End Try
    End Sub 
End Class 

Hinweise

Der rights-Parameter muss das EventWaitHandleRights.Synchronize-Flag enthalten, damit Threads auf das Ereignis warten können, und das EventWaitHandleRights.Modify-Flag, damit Threads die Set-und Reset Methoden aufrufen können.The rights parameter must include the EventWaitHandleRights.Synchronize flag to allow threads to wait on the event, and the EventWaitHandleRights.Modify flag to allow threads to call the Set and Reset methods.

Die OpenExisting-Methode versucht, ein vorhandenes benanntes System Ereignis zu öffnen.The OpenExisting method tries to open an existing named system event. Wenn das System Ereignis nicht vorhanden ist, löst diese Methode eine Ausnahme aus, statt das System Ereignis zu erstellen.If the system event does not exist, this method throws an exception instead of creating the system event. Um das System Ereignis zu erstellen, wenn es nicht bereits vorhanden ist, verwenden Sie einen der EventWaitHandle Konstruktoren mit einem name-Parameter.To create the system event when it does not already exist, use one of the EventWaitHandle constructors that has a name parameter.

Mehrere Aufrufe dieser Methode, die denselben Wert für name verwenden, geben nicht notwendigerweise dasselbe EventWaitHandle Objekt zurück, auch wenn die zurückgegebenen Objekte dasselbe benannte System Ereignis darstellen.Multiple calls to this method that use the same value for name do not necessarily return the same EventWaitHandle object, even though the objects that are returned represent the same named system event.

Sicherheit

SecurityCriticalAttribute
Erfordert volle Vertrauenswürdigkeit für den unmittelbaren Aufrufer.Requires full trust for the immediate caller. Dieser Member kann nicht von teilweise vertrauenswürdigem oder transparentem Code verwendet werden.This member cannot be used by partially trusted or transparent code.

Siehe auch

Gilt für: