Task.FromException Methode

Definition

Überlädt

FromException(Exception)

Erstellt einen durch eine angegebene Ausnahme abgeschlossenen Task.

FromException<TResult>(Exception)

Erstellt einen durch eine angegebene Ausnahme abgeschlossenen Task<TResult>.

FromException(Exception)

Erstellt einen durch eine angegebene Ausnahme abgeschlossenen Task.

public:
 static System::Threading::Tasks::Task ^ FromException(Exception ^ exception);
public static System.Threading.Tasks.Task FromException (Exception exception);
static member FromException : Exception -> System.Threading.Tasks.Task
Public Shared Function FromException (exception As Exception) As Task

Parameter

exception
Exception

Die Ausnahme, mit der die Aufgabe abgeschlossen werden soll.

Gibt zurück

Die fehlerhafte Aufgabe.

Hinweise

Diese Methode erstellt ein Task -Objekt, dessen Status -Eigenschaft ist Faulted und dessen Exception -Eigenschaft enthält exception. Die -Methode wird häufig verwendet, wenn Sie sofort wissen, dass die von einer Aufgabe ausgeführte Arbeit eine Ausnahme auslöst, bevor ein längerer Codepfad ausgeführt wird. Ein Beispiel finden Sie in der FromException<TResult>(Exception) Überladung.

Gilt für:

FromException<TResult>(Exception)

Erstellt einen durch eine angegebene Ausnahme abgeschlossenen Task<TResult>.

public:
generic <typename TResult>
 static System::Threading::Tasks::Task<TResult> ^ FromException(Exception ^ exception);
public static System.Threading.Tasks.Task<TResult> FromException<TResult> (Exception exception);
static member FromException : Exception -> System.Threading.Tasks.Task<'Result>
Public Shared Function FromException(Of TResult) (exception As Exception) As Task(Of TResult)

Typparameter

TResult

Der Typ des von der Aufgabe zurückgegebenen Ergebnisses.

Parameter

exception
Exception

Die Ausnahme, mit der die Aufgabe abgeschlossen werden soll.

Gibt zurück

Die fehlerhafte Aufgabe.

Beispiele

Das folgende Beispiel ist ein Befehlszeilenprogramm, das die Anzahl der Bytes in den Dateien in jedem Verzeichnis berechnet, dessen Name als Befehlszeilenargument übergeben wird. Anstatt einen längeren Codepfad auszuführen, der ein FileInfo Objekt instanziiert und den Wert seiner FileInfo.Length Eigenschaft für jede Datei im Verzeichnis abruft, ruft das Beispiel einfach die FromException<TResult>(Exception) -Methode auf, um eine fehlerhafte Aufgabe zu erstellen, wenn kein bestimmtes Unterverzeichnis vorhanden ist.

using System;
using System.Collections.Generic;
using System.IO;
using System.Threading;
using System.Threading.Tasks;

public class Example
{
   public static void Main()
   {
      string[] args = Environment.GetCommandLineArgs();
      if (args.Length > 1) {
         List<Task<long>> tasks = new List<Task<long>>();
         for (int ctr = 1; ctr < args.Length; ctr++)
            tasks.Add(GetFileLengthsAsync(args[ctr]));

         try {
            Task.WaitAll(tasks.ToArray());
         }
         // Ignore exceptions here.
         catch (AggregateException) {}

         for (int ctr = 0 ; ctr < tasks.Count; ctr++) {
            if (tasks[ctr].Status == TaskStatus.Faulted)
               Console.WriteLine("{0} does not exist", args[ctr + 1]);
            else
               Console.WriteLine("{0:N0} bytes in files in '{1}'",
                                 tasks[ctr].Result, args[ctr + 1]);
         }
      }
      else {
         Console.WriteLine("Syntax error: Include one or more file paths.");
      }
   }

   private static Task<long> GetFileLengthsAsync(string filePath)
   {
      if (! Directory.Exists(filePath)) {
         return Task.FromException<long>(
                     new DirectoryNotFoundException("Invalid directory name."));
      }
      else {
         string[] files = Directory.GetFiles(filePath);
         if (files.Length == 0)
            return Task.FromResult(0L);
         else
            return Task.Run( () => { long total = 0;
                                     Parallel.ForEach(files, (fileName) => {
                                                 var fs = new FileStream(fileName, FileMode.Open,
                                                                         FileAccess.Read, FileShare.ReadWrite,
                                                                         256, true);
                                                 long length = fs.Length;
                                                 Interlocked.Add(ref total, length);
                                                 fs.Close(); } );
                                     return total;
                                   } );
      }
   }
}
// When launched with the following command line arguments:
//      subdir . newsubdir
// the example displays output like the following:
//       0 bytes in files in 'subdir'
//       2,059 bytes in files in '.'
//       newsubdir does not exist
open System
open System.IO
open System.Threading
open System.Threading.Tasks

let getFileLengthsAsync filePath =
    if Directory.Exists filePath |> not then
        DirectoryNotFoundException "Invalid directory name."
        |> Task.FromException<int64>

    else
        let files = Directory.GetFiles filePath

        if files.Length = 0 then
            Task.FromResult 0L
        else
            Task.Run(fun () ->
                let mutable total = 0L

                Parallel.ForEach(
                    files,
                    fun fileName ->
                        use fs =
                            new FileStream(fileName, FileMode.Open, FileAccess.Read, FileShare.ReadWrite, 256, true)

                        Interlocked.Add(ref total, fs.Length) |> ignore
                )
                |> ignore

                total)

let args = Environment.GetCommandLineArgs()[1..]

if args.Length > 0 then
    let tasks = Array.map getFileLengthsAsync args

    try
        Seq.cast tasks |> Seq.toArray |> Task.WaitAll

    // Ignore exceptions here.
    with :? AggregateException ->
        ()

    for i = 0 to tasks.Length - 1 do
        if tasks[i].Status = TaskStatus.Faulted then
            printfn $"{args[i + 1]} does not exist"
        else
            printfn $"{tasks[i].Result:N0} bytes in files in '{args[i + 1]}'"
else
    printfn "Syntax error: Include one or more file paths."

// When launched with the following command line arguments:
//      subdir . newsubdir
// the example displays output like the following:
//       0 bytes in files in 'subdir'
//       2,059 bytes in files in '.'
//       newsubdir does not exist
Imports System.Collections.Generic
Imports System.IO
Imports System.Threading
Imports System.Threading.Tasks

Module Example
   Public Sub Main()
      Dim args() As String = Environment.GetCommandLineArgs()
      If args.Length > 1 Then
         Dim tasks As New List(Of Task(Of Long))
         For ctr = 1 To args.Length - 1
            tasks.Add(GetFileLengthsAsync(args(ctr)))
         Next
         Try
            Task.WaitAll(tasks.ToArray())
         ' Ignore exceptions here.
         Catch e As AggregateException
         End Try

         For ctr As Integer = 0 To tasks.Count - 1
            If tasks(ctr).Status = TaskStatus.Faulted Then
               Console.WriteLine("{0} does not exist", args(ctr + 1))
            Else
               Console.WriteLine("{0:N0} bytes in files in '{1}'",
                                 tasks(ctr).Result, args(ctr + 1))
            End If
         Next
      Else
         Console.WriteLine("Syntax error: Include one or more file paths.")
      End If
   End Sub
   
   Private Function GetFileLengthsAsync(filePath As String) As Task(Of Long)
      If Not Directory.Exists(filePath) Then
         Return Task.FromException(Of Long)(
                     New DirectoryNotFoundException("Invalid directory name."))
      Else
         Dim files As String() = Directory.GetFiles(filePath)
         If files.Length = 0 Then
            Return Task.FromResult(0L)
         Else
            Return Task.Run( Function()
                                Dim total As Long = 0
                                Dim lockObj As New Object
                                Parallel.ForEach(files, Sub(fileName)
                                                           Dim fs As New FileStream(fileName, FileMode.Open,
                                                                     FileAccess.Read, FileShare.ReadWrite,
                                                                     256, True)
                                                           Dim length As Long = fs.Length
                                                           Interlocked.Add(total, length)
                                                           fs.Close()
                                                        End Sub)
                                Return total
                             End Function )
         End If
      End If
   End Function
End Module
' When launched with the following command line arguments:
'      subdir . newsubdir
' the example displays output like the following:
'       0 bytes in files in 'subdir'
'       2,059 bytes in files in '.'
'       newsubdir does not exist

Hinweise

Diese Methode erstellt ein Task<TResult> -Objekt, dessen Status -Eigenschaft ist Faulted und dessen Exception -Eigenschaft enthält exception. Die -Methode wird häufig verwendet, wenn Sie sofort wissen, dass die von einer Aufgabe ausgeführte Arbeit eine Ausnahme auslöst, bevor ein längerer Codepfad ausgeführt wird. Dies wird im Beispiel veranschaulicht.

Gilt für: