New-VMSwitch
New-VMSwitch
Creates a new virtual switch on one or more virtual machine hosts.
Syntax
Parameter Set: NetAdapterName
New-VMSwitch [-Name] <String> -NetAdapterName <String[]> [-AllowManagementOS <Boolean> ] [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-EnableEmbeddedTeaming <Nullable [System.Boolean]> ] [-EnableIov <Boolean]> ] [-EnablePacketDirect <Nullable [System.Boolean]> ] [-MinimumBandwidthMode <VMSwitchBandwidthMode> {Default | Weight | Absolute | None} ] [-NATSubnetAddress <System.String> ] [-Notes <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: NetAdapterInterfaceDescription
New-VMSwitch [-Name] <String> -NetAdapterInterfaceDescription <String[]> [-AllowManagementOS <Boolean> ] [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-EnableEmbeddedTeaming <Nullable [System.Boolean]> ] [-EnableIov <Boolean]> ] [-EnablePacketDirect <Nullable [System.Boolean]> ] [-MinimumBandwidthMode <VMSwitchBandwidthMode> {Default | Weight | Absolute | None} ] [-NATSubnetAddress <System.String> ] [-Notes <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Parameter Set: SwitchType
New-VMSwitch [-Name] <String> -SwitchType <VMSwitchType> {Private | Internal | External | NAT} [-CimSession <Microsoft.Management.Infrastructure.CimSession[]> ] [-ComputerName <String[]> ] [-Credential <System.Management.Automation.PSCredential[]> ] [-EnableEmbeddedTeaming <Nullable [System.Boolean]> ] [-EnableIov <Boolean]> ] [-EnablePacketDirect <Nullable [System.Boolean]> ] [-MinimumBandwidthMode <VMSwitchBandwidthMode> {Default | Weight | Absolute | None} ] [-NATSubnetAddress <System.String> ] [-Notes <String> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Detaillierte Beschreibung
The New-VMSwitch cmdlet creates a new virtual switch on one or more virtual machine hosts.
Parameter
-AllowManagementOS<Boolean>
Specifies whether the parent partition (i.e. the management operating system) is to have access to the physical NIC bound to the virtual switch to be created.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-CimSession<Microsoft.Management.Infrastructure.CimSession[]>
Das Cmdlet wird in einer Remotesitzung oder auf einem Remotecomputer ausgeführt. Geben Sie einen Computernamen oder ein Sitzungsobjekt ein, wie z. B. die Ausgabe eines New-CimSession oder Get-CimSession-Cmdlets. Der Standardwert ist die aktuelle Sitzung auf dem lokalen Computer.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
true(ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-ComputerName<String[]>
Specifies one or more Hyper-V hosts on which the virtual switch is to be created. NetBIOS names, IP addresses, and fully qualified domain names are allowable. The default is the local computer. Use localhost or a dot (.) to specify the local computer explicitly.
Aliase |
PSComputerName |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-Credential<System.Management.Automation.PSCredential[]>
Specifies one or more user accounts that have permission to perform this action. The default is the current user.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
true(ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-EnableEmbeddedTeaming<Nullable [System.Boolean]>
Specifies whether this cmdlet enables teaming for the virtual switch.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-EnableIov<Boolean]>
Specifies that IO virtualization is to be enabled on the virtual switch to be created.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-EnablePacketDirect<Nullable [System.Boolean]>
Specifies whether this cmdlet enables the packet direct path through the virtual switch. The default value is $False.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-MinimumBandwidthMode<VMSwitchBandwidthMode>
Specifies how minimum bandwidth is to be configured on the virtual switch. Allowed values are Absolute, Default, None, or Weight. If Absolute is specified, minimum bandwidth is bits per second. If Weight is specified, minimum bandwidth is a value ranging from 1 to 100. If None is specified, minimum bandwidth is disabled on the switch – that is, users cannot configure it on any network adapter connected to the switch. If Default is specified, the system will set the mode to Weight, if the switch is not IOV-enabled, or None if the switch is IOV-enabled.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-Name<String>
Specifies the name of the switch to be created.
Aliase |
SwitchName |
Erforderlich? |
true |
Position? |
1 |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-NATSubnetAddress<System.String>
Specifies network address translation (NAT) subnet address for a NAT virtual switch.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-Notes<String>
Specifies a note to be associated with the switch to be created.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-SwitchType<VMSwitchType>
Specifies the type of the switch to be created. Allowed values are Internal and Private. To create an External virtual switch, specify either the NetAdapterInterfaceDescription or the NetAdapterName parameter, which implicitly set the type of the virtual switch to External.
Aliase |
none |
Erforderlich? |
true |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-NetAdapterInterfaceDescription<String[]>
Specifies the interface description of the network adapter to be bound to the switch to be created. You can use the Get-NetAdapter cmdlet to get the interface description of a network adapter.
Aliase |
InterfaceDescription |
Erforderlich? |
true |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-NetAdapterName<String[]>
Specifies the name of the network adapter to be bound to the switch to be created. You can use the Get-NetAdapter cmdlet to get the interface description of a network adapter.
Aliase |
InterfaceAlias |
Erforderlich? |
true |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
True (ByPropertyName) |
Platzhalterzeichen akzeptieren? |
false |
-Confirm
Fordert Sie vor der Ausführung des Cmdlet zum Bestätigen auf.
Erforderlich? |
false |
Position? |
named |
Standardwert |
false |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-WhatIf
Zeit, was passieren würde, wenn das Cmdlet ausgeführt wird. Das Cmdlet wird nicht ausgeführt.
Erforderlich? |
false |
Position? |
named |
Standardwert |
false |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
<CommonParameters>
Dieses Cmdlet unterstützt die allgemeinen Parameter: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer und -OutVariable. Weitere Informationen finden Sie unter about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Eingaben
Der Eingabetyp ist der Typ der Objekte, die Sie per Piping an das Cmdlet übergeben können.
Ausgaben
Der Ausgabetyp ist der Typ der Objekte, die vom Cmdlet ausgegeben werden.
- Microsoft.HyperV.PowerShell.EthernetSwitch
Beispiele
Example 1
Creates a new switch QoS switch, which binds to a network adapter called Wired Ethernet Connection 3 and supports weight-based minimum bandwidth.
PS C:\> New-VMSwitch "QoS Switch" -NetAdapterName "Wired Ethernet Connection 3" -MinimumBandwidthMode Weight