Supported SUSE virtual machines on Hyper-V

Applies To: Windows Server 2016, Hyper-V Server 2016, Windows Server 2012 R2, Hyper-V Server 2012 R2, Windows Server 2012, Hyper-V Server 2012, Windows Server 2008 R2, Windows 10, Windows 8.1, Windows 8, Windows 7.1, Windows 7

The following is a feature distribution map that indicates the features in each version. The known issues and workarounds for each distribution are listed after the table.

The built-in SUSE Linux Enterprise Service drivers for Hyper-V are certified by SUSE. An example configuration can be viewed in this bulletin: SUSE YES Certification Bulletin.

Table legend

  • Built in - LIS are included as part of this Linux distribution.The Microsoft-provided LIS download package does not work for this distribution, so do not install it.The kernel module version numbers for the built in LIS (as shown by lsmod, for example) are different from the version number on the Microsoft-provided LIS download package. A mismatch doesn't indicate that the built in LIS is out of date.

  • ✔ - Feature available

  • (blank) - Feature not available

SLES12+ is 64-bit only.

Feature Windows Server operating system version SLES 15 SLES 12 SP3/SP4 SLES 12 SP2 SLES 12 SP1 SLES 11 SP4 SLES 11 SP3
Availability Built-in Built-in Built-in Built-in Built-in Built-in
Core 2019, 2016, 2012 R2, 2012, 2008 R2
Windows Server 2016 Accurate Time 2019, 2016
Networking
Jumbo frames 2019, 2016, 2012 R2, 2012, 2008 R2
VLAN tagging and trunking 2019, 2016, 2012 R2, 2012, 2008 R2
Live migration 2019, 2016, 2012 R2, 2012, 2008 R2
Static IP Injection 2019, 2016, 2012 R2, 2012 ✔Note 1 ✔Note 1 ✔Note 1 ✔Note 1 ✔Note 1 ✔Note 1
vRSS 2019, 2016, 2012 R2
TCP Segmentation and Checksum Offloads 2019, 2016, 2012 R2, 2012, 2008 R2
SR-IOV 2019, 2016
Storage
VHDX resize 2019, 2016, 2012 R2
Virtual Fibre Channel 2019, 2016, 2012 R2
Live virtual machine backup 2019, 2016, 2012 R2 ✔ Note 2, 3, 8 ✔ Note 2, 3, 8 ✔ Note 2, 3, 8 ✔ Note 2, 3, 8 ✔ Note 2, 3, 8 ✔ Note 2, 3, 8
TRIM support 2019, 2016, 2012 R2
SCSI WWN 2019, 2016, 2012 R2
Memory
PAE Kernel Support 2019, 2016, 2012 R2, 2012, 2008 R2 N/A N/A N/A N/A
Configuration of MMIO gap 2019, 2016, 2012 R2
Dynamic Memory - Hot-Add 2019, 2016, 2012 R2, 2012 ✔ Note 5, 6 ✔ Note 5, 6 ✔ Note 5, 6 ✔ Note 5, 6 ✔ Note 4, 5, 6 ✔ Note 4, 5, 6
Dynamic Memory - Ballooning 2019, 2016, 2012 R2, 2012 ✔ Note 5, 6 ✔ Note 5, 6 ✔ Note 5, 6 ✔ Note 5, 6 ✔ Note 4, 5, 6 ✔ Note 4, 5, 6
Runtime Memory Resize 2019, 2016 ✔ Note 5, 6 ✔ Note 5, 6 ✔ Note 5, 6
Video
Hyper-V-specific video device 2019, 2016, 2012 R2, 2012, 2008 R2
Miscellaneous
Key/value pair 2019, 2016, 2012 R2, 2012, 2008 R2 ✔ Note 7 ✔ Note 7
Non-Maskable Interrupt 2019, 2016, 2012 R2
File copy from host to guest 2019, 2016, 2012 R2
lsvmbus command 2019, 2016, 2012 R2, 2012, 2008 R2
Hyper-V Sockets 2019, 2016
PCI Passthrough/DDA 2019, 2016
Generation 2 virtual machines
Boot using UEFI 2019, 2016, 2012 R2 ✔ Note 9 ✔ Note 9 ✔ Note 9 ✔ Note 9 ✔ Note 9
Secure boot 2019, 2016

Notes

  1. Static IP injection may not work if Network Manager has been configured for a given Hyper-V-specific network adapter on the virtual machine. To ensure smooth functioning of static IP injection please ensure that Network Manager is turned off completely or has been turned off for a specific network adapter through its ifcfg-ethX file.

  2. If there are open file handles during a live virtual machine backup operation, then in some corner cases, the backed-up VHDs might have to undergo a file system consistency check (fsck) on restore.

  3. Live backup operations can fail silently if the virtual machine has an attached iSCSI device or direct-attached storage (also known as a pass-through disk).

  4. Dynamic memory operations can fail if the guest operating system is running too low on memory. The following are some best practices:

    • Startup memory and minimal memory should be equal to or greater than the amount of memory that the distribution vendor recommends.

    • Applications that tend to consume the entire available memory on a system are limited to consuming up to 80 percent of available RAM.

  5. Dynamic memory support is only available on 64-bit virtual machines.

  6. If you are using Dynamic Memory on Windows Server 2016 or Windows Server 2012 operating systems, specify Startup memory, Minimum memory, and Maximum memory parameters in multiples of 128 megabytes (MB). Failure to do so can lead to Hot-Add failures, and you may not see any memory increase in a guest operating system.

  7. In Windows Server 2016 or Windows Server 2012 R2, the key/value pair infrastructure might not function correctly without a Linux software update. Contact your distribution vendor to obtain the software update in case you see problems with this feature.

  8. VSS backup will fail if a single partition is mounted multiple times.

  9. On Windows Server 2012 R2, Generation 2 virtual machines have secure boot enabled by default and Generation 2 Linux virtual machines will not boot unless the secure boot option is disabled. You can disable secure boot in the Firmware section of the settings for the virtual machine in Hyper-V Manager or you can disable it using Powershell:

    Set-VMFirmware -VMName "VMname" -EnableSecureBoot Off
    

See Also