Verwenden von Koordinatenbereichen und Transformationen

Dieser Abschnitt enthält ein Beispiel, das die folgenden Aufgaben veranschaulicht:

  • Zeichnen von Grafiken mit vordefinierten Einheiten.
  • Zentrieren von Grafiken im Clientbereich der Anwendung.
  • Skalieren der Grafikausgabe auf die Hälfte der ursprünglichen Größe.
  • Übersetzung der Grafikausgabe 3/4 Zoll nach rechts.
  • Drehen von Grafiken um 30 Grad.
  • Schieren der Grafikausgabe entlang der x-Achse.
  • Darstellung der Grafikausgabe über eine imaginäre horizontale Achse, die durch ihren Mittelpunkt gezeichnet wird.

Das folgende Beispiel wurde verwendet, um die Abbildungen zu erstellen, die weiter oben in dieser Übersicht angezeigt wurden.

void TransformAndDraw(int iTransform, HWND hWnd) 
{ 
    HDC hDC; 
    XFORM xForm; 
    RECT rect; 
 
    // Retrieve a DC handle for the application's window.  
 
    hDC = GetDC(hWnd); 
 
    // Set the mapping mode to LOENGLISH. This moves the  
    // client area origin from the upper left corner of the  
    // window to the lower left corner (this also reorients  
    // the y-axis so that drawing operations occur in a true  
    // Cartesian space). It guarantees portability so that  
    // the object drawn retains its dimensions on any display.  

    SetGraphicsMode(hDC, GM_ADVANCED);
    SetMapMode(hDC, MM_LOENGLISH); 
 
    // Set the appropriate world transformation (based on the  
    // user's menu selection).  
 
    switch (iTransform) 
    { 
        case SCALE:        // Scale to 1/2 of the original size.  
            xForm.eM11 = (FLOAT) 0.5; 
            xForm.eM12 = (FLOAT) 0.0; 
            xForm.eM21 = (FLOAT) 0.0; 
            xForm.eM22 = (FLOAT) 0.5; 
            xForm.eDx  = (FLOAT) 0.0; 
            xForm.eDy  = (FLOAT) 0.0; 
            SetWorldTransform(hDC, &xForm); 
            break; 
 
        case TRANSLATE:   // Translate right by 3/4 inch.  
            xForm.eM11 = (FLOAT) 1.0; 
            xForm.eM12 = (FLOAT) 0.0; 
            xForm.eM21 = (FLOAT) 0.0; 
            xForm.eM22 = (FLOAT) 1.0; 
            xForm.eDx  = (FLOAT) 75.0; 
            xForm.eDy  = (FLOAT) 0.0; 
            SetWorldTransform(hDC, &xForm); 
            break; 
 
        case ROTATE:      // Rotate 30 degrees counterclockwise.  
            xForm.eM11 = (FLOAT) 0.8660; 
            xForm.eM12 = (FLOAT) 0.5000; 
            xForm.eM21 = (FLOAT) -0.5000; 
            xForm.eM22 = (FLOAT) 0.8660; 
            xForm.eDx  = (FLOAT) 0.0; 
            xForm.eDy  = (FLOAT) 0.0; 
            SetWorldTransform(hDC, &xForm); 
            break; 
 
        case SHEAR:       // Shear along the x-axis with a  
                          // proportionality constant of 1.0.  
            xForm.eM11 = (FLOAT) 1.0; 
            xForm.eM12 = (FLOAT) 1.0; 
            xForm.eM21 = (FLOAT) 0.0; 
            xForm.eM22 = (FLOAT) 1.0; 
            xForm.eDx  = (FLOAT) 0.0; 
            xForm.eDy  = (FLOAT) 0.0; 
            SetWorldTransform(hDC, &xForm); 
            break; 
 
        case REFLECT:     // Reflect about a horizontal axis.  
            xForm.eM11 = (FLOAT) 1.0; 
            xForm.eM12 = (FLOAT) 0.0; 
            xForm.eM21 = (FLOAT) 0.0; 
            xForm.eM22 = (FLOAT) -1.0; 
            xForm.eDx  = (FLOAT) 0.0; 
            xForm.eDy  = (FLOAT) 0.0; 
            SetWorldTransform(hDC, &xForm); 
            break; 
 
        case NORMAL:      // Set the unity transformation.  
            xForm.eM11 = (FLOAT) 1.0; 
            xForm.eM12 = (FLOAT) 0.0; 
            xForm.eM21 = (FLOAT) 0.0; 
            xForm.eM22 = (FLOAT) 1.0; 
            xForm.eDx  = (FLOAT) 0.0; 
            xForm.eDy  = (FLOAT) 0.0; 
            SetWorldTransform(hDC, &xForm); 
            break; 
 
    } 
 
    // Find the midpoint of the client area.  
 
    GetClientRect(hWnd, (LPRECT) &rect); 
    DPtoLP(hDC, (LPPOINT) &rect, 2); 
 
    // Select a hollow brush.  
 
    SelectObject(hDC, GetStockObject(HOLLOW_BRUSH)); 
 
    // Draw the exterior circle.  
 
    Ellipse(hDC, (rect.right / 2 - 100), (rect.bottom / 2 + 100), 
        (rect.right / 2 + 100), (rect.bottom / 2 - 100)); 
 
    // Draw the interior circle.  
 
    Ellipse(hDC, (rect.right / 2 -94), (rect.bottom / 2 + 94), 
        (rect.right / 2 + 94), (rect.bottom / 2 - 94)); 
 
    // Draw the key.  
 
    Rectangle(hDC, (rect.right / 2 - 13), (rect.bottom / 2 + 113), 
        (rect.right / 2 + 13), (rect.bottom / 2 + 50)); 
    Rectangle(hDC, (rect.right / 2 - 13), (rect.bottom / 2 + 96), 
        (rect.right / 2 + 13), (rect.bottom / 2 + 50)); 
 
    // Draw the horizontal lines.  
 
    MoveToEx(hDC, (rect.right/2 - 150), (rect.bottom / 2 + 0), NULL); 
    LineTo(hDC, (rect.right / 2 - 16), (rect.bottom / 2 + 0)); 
 
    MoveToEx(hDC, (rect.right / 2 - 13), (rect.bottom / 2 + 0), NULL); 
    LineTo(hDC, (rect.right / 2 + 13), (rect.bottom / 2 + 0)); 
 
    MoveToEx(hDC, (rect.right / 2 + 16), (rect.bottom / 2 + 0), NULL); 
    LineTo(hDC, (rect.right / 2 + 150), (rect.bottom / 2 + 0)); 
 
    // Draw the vertical lines.  
 
    MoveToEx(hDC, (rect.right/2 + 0), (rect.bottom / 2 - 150), NULL); 
    LineTo(hDC, (rect.right / 2 + 0), (rect.bottom / 2 - 16)); 
 
    MoveToEx(hDC, (rect.right / 2 + 0), (rect.bottom / 2 - 13), NULL); 
    LineTo(hDC, (rect.right / 2 + 0), (rect.bottom / 2 + 13)); 
 
    MoveToEx(hDC, (rect.right / 2 + 0), (rect.bottom / 2 + 16), NULL); 
    LineTo(hDC, (rect.right / 2 + 0), (rect.bottom / 2 + 150)); 
 
    ReleaseDC(hWnd, hDC); 
}