Erstellen einer Ansicht in einer Datei
Wenn Sie einen Teil der Datei anzeigen möchten, der nicht am Anfang der Datei beginnt, müssen Sie ein Dateizuordnungsobjekt erstellen. Dieses Objekt entspricht der Größe des Teils der Datei, den Sie anzeigen möchten, plus dem Offset in der Datei. Wenn Sie beispielsweise die 1 Kilobyte (1K) anzeigen möchten, die 131.072 Bytes (128 KB) in der Datei beginnt, müssen Sie ein Dateizuordnungsobjekt mit einer Größe von mindestens 132.096 Bytes (129 KB) erstellen. Die Ansicht beginnt 131.072 Bytes (128.000) in der Datei und wird um mindestens 1.024 Bytes erweitert. In diesem Beispiel wird eine Dateizuordnungsgranularität von 64.000 angenommen.
Die Granularität der Dateizuordnung wirkt sich auf den Start einer Kartenansicht aus. Eine Zuordnungsansicht muss bei einem Offset in die Datei beginnen, die ein Vielfaches der Granularität der Dateizuordnung ist. Daher können die anzuzeigenden Daten das Dateioffsetmodulo der Zuordnungsgranularität in der Ansicht sein. Die Größe der Ansicht entspricht dem Offset des Datenmoduls und der Zuordnungsgranularität sowie der Größe der zu untersuchenden Daten.
Angenommen, die GetSystemInfo-Funktion gibt eine Zuordnungsgranularität von 64 KB an. Gehen Sie wie folgt vor, um 1.000 Daten mit 138.240 Bytes (135.000) in der Datei zu untersuchen:
- Erstellen Sie ein Dateizuordnungsobjekt mit einer Größe von mindestens 139.264 Bytes (136 KB).
- Erstellen Sie eine Dateiansicht, die mit einem Dateioffset beginnt, bei dem es sich um das größte Vielfache der Granularität der Dateizuordnung handelt, die kleiner als der von Ihnen geforderte Offset ist. In diesem Fall beginnt die Dateiansicht mit offset 131.072 (128K) in die Datei. Die Ansicht ist 139264 Bytes (136K) minus 131.072 Bytes (128K) oder 8.192 Bytes (8K) groß.
- Erstellen Sie einen Zeigeroffset von 7K in der Ansicht, um auf die 1K zuzugreifen, an der Sie interessiert sind.
Wenn die gewünschten Daten eine Dateizuordnungsgranularitätsgrenze überschreiten, können Sie die Ansicht größer als die Granularität der Dateizuordnung machen. Dadurch wird vermieden, dass die Daten in Teile aufgeteilt werden.
Das folgende Programm veranschaulicht das zweite beispiel oben.
/*
This program demonstrates file mapping, especially how to align a
view with the system file allocation granularity.
*/
#include <windows.h>
#include <stdio.h>
#include <tchar.h>
#define BUFFSIZE 1024 // size of the memory to examine at any one time
#define FILE_MAP_START 138240 // starting point within the file of
// the data to examine (135K)
/* The test file. The code below creates the file and populates it,
so there is no need to supply it in advance. */
TCHAR * lpcTheFile = TEXT("fmtest.txt"); // the file to be manipulated
int main(void)
{
HANDLE hMapFile; // handle for the file's memory-mapped region
HANDLE hFile; // the file handle
BOOL bFlag; // a result holder
DWORD dBytesWritten; // number of bytes written
DWORD dwFileSize; // temporary storage for file sizes
DWORD dwFileMapSize; // size of the file mapping
DWORD dwMapViewSize; // the size of the view
DWORD dwFileMapStart; // where to start the file map view
DWORD dwSysGran; // system allocation granularity
SYSTEM_INFO SysInfo; // system information; used to get granularity
LPVOID lpMapAddress; // pointer to the base address of the
// memory-mapped region
char * pData; // pointer to the data
int i; // loop counter
int iData; // on success contains the first int of data
int iViewDelta; // the offset into the view where the data
//shows up
// Create the test file. Open it "Create Always" to overwrite any
// existing file. The data is re-created below
hFile = CreateFile(lpcTheFile,
GENERIC_READ | GENERIC_WRITE,
0,
NULL,
CREATE_ALWAYS,
FILE_ATTRIBUTE_NORMAL,
NULL);
if (hFile == INVALID_HANDLE_VALUE)
{
_tprintf(TEXT("hFile is NULL\n"));
_tprintf(TEXT("Target file is %s\n"),
lpcTheFile);
return 4;
}
// Get the system allocation granularity.
GetSystemInfo(&SysInfo);
dwSysGran = SysInfo.dwAllocationGranularity;
// Now calculate a few variables. Calculate the file offsets as
// 64-bit values, and then get the low-order 32 bits for the
// function calls.
// To calculate where to start the file mapping, round down the
// offset of the data into the file to the nearest multiple of the
// system allocation granularity.
dwFileMapStart = (FILE_MAP_START / dwSysGran) * dwSysGran;
_tprintf (TEXT("The file map view starts at %ld bytes into the file.\n"),
dwFileMapStart);
// Calculate the size of the file mapping view.
dwMapViewSize = (FILE_MAP_START % dwSysGran) + BUFFSIZE;
_tprintf (TEXT("The file map view is %ld bytes large.\n"),
dwMapViewSize);
// How large will the file mapping object be?
dwFileMapSize = FILE_MAP_START + BUFFSIZE;
_tprintf (TEXT("The file mapping object is %ld bytes large.\n"),
dwFileMapSize);
// The data of interest isn't at the beginning of the
// view, so determine how far into the view to set the pointer.
iViewDelta = FILE_MAP_START - dwFileMapStart;
_tprintf (TEXT("The data is %d bytes into the view.\n"),
iViewDelta);
// Now write a file with data suitable for experimentation. This
// provides unique int (4-byte) offsets in the file for easy visual
// inspection. Note that this code does not check for storage
// medium overflow or other errors, which production code should
// do. Because an int is 4 bytes, the value at the pointer to the
// data should be one quarter of the desired offset into the file
for (i=0; i<(int)dwSysGran; i++)
{
WriteFile (hFile, &i, sizeof (i), &dBytesWritten, NULL);
}
// Verify that the correct file size was written.
dwFileSize = GetFileSize(hFile, NULL);
_tprintf(TEXT("hFile size: %10d\n"), dwFileSize);
// Create a file mapping object for the file
// Note that it is a good idea to ensure the file size is not zero
hMapFile = CreateFileMapping( hFile, // current file handle
NULL, // default security
PAGE_READWRITE, // read/write permission
0, // size of mapping object, high
dwFileMapSize, // size of mapping object, low
NULL); // name of mapping object
if (hMapFile == NULL)
{
_tprintf(TEXT("hMapFile is NULL: last error: %d\n"), GetLastError() );
return (2);
}
// Map the view and test the results.
lpMapAddress = MapViewOfFile(hMapFile, // handle to
// mapping object
FILE_MAP_ALL_ACCESS, // read/write
0, // high-order 32
// bits of file
// offset
dwFileMapStart, // low-order 32
// bits of file
// offset
dwMapViewSize); // number of bytes
// to map
if (lpMapAddress == NULL)
{
_tprintf(TEXT("lpMapAddress is NULL: last error: %d\n"), GetLastError());
return 3;
}
// Calculate the pointer to the data.
pData = (char *) lpMapAddress + iViewDelta;
// Extract the data, an int. Cast the pointer pData from a "pointer
// to char" to a "pointer to int" to get the whole thing
iData = *(int *)pData;
_tprintf (TEXT("The value at the pointer is %d,\nwhich %s one quarter of the desired file offset.\n"),
iData,
iData*4 == FILE_MAP_START ? TEXT("is") : TEXT("is not"));
// Close the file mapping object and the open file
bFlag = UnmapViewOfFile(lpMapAddress);
bFlag = CloseHandle(hMapFile); // close the file mapping object
if(!bFlag)
{
_tprintf(TEXT("\nError %ld occurred closing the mapping object!"),
GetLastError());
}
bFlag = CloseHandle(hFile); // close the file itself
if(!bFlag)
{
_tprintf(TEXT("\nError %ld occurred closing the file!"),
GetLastError());
}
return 0;
}