Deploy Azure SQL Edge with Docker

In this quickstart, you use Docker to pull and run the Azure SQL Edge container image. Then connect with sqlcmd to create your first database and run queries.

This image consists of Azure SQL Edge based on Ubuntu 18.04. It can be used with the Docker Engine 1.8+ on Linux or on Docker for Mac/Windows.

Prerequisites

  • Docker Engine 1.8+ on any supported Linux distribution or Docker for Mac/Windows. For more information, see Install Docker. Since the Azure SQL Edge images are based on Ubuntu 18.04, its recommended that you use a Ubuntu 18.04 docker host.
  • Docker overlay2 storage driver. This is the default for most users. If you find that you are not using this storage provider and need to change, please see the instructions and warnings in the docker documentation for configuring overlay2.
  • Minimum of 10 GB of disk space.
  • Minimum of 1 GB of RAM.
  • Hardware requirements for Azure SQL Edge.

Pull and run the container image

Before starting the following steps, make sure that you have selected your preferred shell (bash, PowerShell, or cmd) at the top of this article.

  1. Pull the Azure SQL Edge container image from Microsoft Container Registry.

    • Pull the Azure SQL Edge container Image 
      sudo docker pull mcr.microsoft.com/azure-sql-edge:latest

Note

For the bash commands in this article sudo is used. On macOS and Windows, sudo might not be required. On Linux, if you do not want to use sudo to run Docker, you can configure a Docker group and add users to that group. For more information, see Post-installation steps for Linux.

The previous command pulls the latest Azure SQL Edge container images. To see all available images, see the azure-sql-egde Docker hub page.

  1. To run the container image with Docker, you can use the following command from a bash shell (Linux/macOS) or elevated PowerShell command prompt.

    • Start a Azure SQL Edge instance running as the Developer edition

      sudo docker run --cap-add SYS_PTRACE -e 'ACCEPT_EULA=1' -e 'MSSQL_SA_PASSWORD=yourStrong(!)Password' -p 1433:1433 --name azuresqledge -d mcr.microsoft.com/azure-sql-edge

    • Start a Azure SQL Edge instance running as the Premium edition

      sudo docker run --cap-add SYS_PTRACE -e 'ACCEPT_EULA=1' -e 'MSSQL_SA_PASSWORD=yourStrong(!)Password' -e 'MSSQL_PID=Premium' -p 1433:1433 --name azuresqledge -d mcr.microsoft.com/azure-sql-edge

    Note

    If you are using PowerShell on Windows to run these commands use double quotes instead of single quotes.

    Note

    The password should follow the Microsoft SQL Database Engine default password policy, otherwise the container can not setup SQL engine and will stop working. By default, the password must be at least 8 characters long and contain characters from three of the following four sets: Uppercase letters, Lowercase letters, Base 10 digits, and Symbols. You can examine the error log by executing the docker logs command.

    The following table provides a description of the parameters in the previous docker run example:

    Parameter Description
    -e "ACCEPT_EULA=Y" Set the ACCEPT_EULA variable to any value to confirm your acceptance of the End-User Licensing Agreement. Required setting for the Azure SQL Edge image.
    -e "MSSQL_SA_PASSWORD=yourStrong(!)Password" Specify your own strong password that is at least 8 characters and meets the Azure SQL Edge password requirements. Required setting for the Azure SQL Edge image.
    -p 1433:1433 Map a TCP port on the host environment (first value) with a TCP port in the container (second value). In this example, Azure SQL Edge is listening on TCP 1433 in the container and this is exposed to the port, 1433, on the host.
    --name azuresqledge Specify a custom name for the container rather than a randomly generated one. If you run more than one container, you cannot reuse this same name.
    -d Run the container in the background (daemon)

    For a complete list of all Azure SQL Edge environment variable, see Configure Azure SQL Edge with Environment Variables.You can also use a mssql.conf file to configure Azure SQL Edge Containers.

  2. To view your Docker containers, use the docker ps command.

     sudo docker ps -a

  3. If the STATUS column shows a status of Up, then Azure SQL Edge is running in the container and listening on the port specified in the PORTS column. If the STATUS column for your Azure SQL Edge container shows Exited, see the Troubleshooting section of Azure SQL Edge Documentation.

    The -h (host name) parameter is also useful, but it is not used in this tutorial for simplicity. This changes the internal name of the container to a custom value. This is the name you'll see returned in the following Transact-SQL query:

    SELECT @@SERVERNAME,
    SERVERPROPERTY('ComputerNamePhysicalNetBIOS'),
    SERVERPROPERTY('MachineName'),
    SERVERPROPERTY('ServerName')

    Setting -h and --name to the same value is a good way to easily identify the target container.

  4. As a final step, change your SA password because the SA_PASSWORD is visible in ps -eax output and stored in the environment variable of the same name. See steps below.

Change the SA password

The SA account is a system administrator on the Azure SQL Edge instance that gets created during setup. After creating your Azure SQL Edge container, the MSSQL_SA_PASSWORD environment variable you specified is discoverable by running echo $SA_PASSWORD in the container. For security purposes, change your SA password.

  1. Choose a strong password to use for the SA user.

  2. Use docker exec to run sqlcmd to change the password using Transact-SQL. In the following example, replace the old password, <YourStrong!Passw0rd>, and the new password, <YourNewStrong!Passw0rd>, with your own password values.

    sudo docker exec -it azuresqledge /opt/mssql-tools/bin/sqlcmd \
   -S localhost -U SA -P "<YourStrong@Passw0rd>" \
   -Q 'ALTER LOGIN SA WITH PASSWORD="<YourNewStrong@Passw0rd>"'

Connect to Azure SQL Edge

The following steps use the Azure SQL Edge command-line tool, sqlcmd, inside the container to connect to Azure SQL Edge.

Note

sqlcmd tool is not available inside the ARM64 version of SQL Edge containers.

  1. Use the docker exec -it command to start an interactive bash shell inside your running container. In the following example azuresqledge is name specified by the --name parameter when you created the container.

    sudo docker exec -it azuresqledge "bash"

  2. Once inside the container, connect locally with sqlcmd. Sqlcmd is not in the path by default, so you have to specify the full path.

    /opt/mssql-tools/bin/sqlcmd -S localhost -U SA -P "<YourNewStrong@Passw0rd>"

    Tip

    You can omit the password on the command-line to be prompted to enter it.

  3. If successful, you should get to a sqlcmd command prompt: 1>.

Create and query data

The following sections walk you through using sqlcmd and Transact-SQL to create a new database, add data, and run a simple query.

Create a new database

The following steps create a new database named TestDB.

  1. From the sqlcmd command prompt, paste the following Transact-SQL command to create a test database:

    CREATE DATABASE TestDB
Go

  2. On the next line, write a query to return the name of all of the databases on your server:

    SELECT Name from sys.Databases
Go

Insert data

Next create a new table, Inventory, and insert two new rows.

  1. From the sqlcmd command prompt, switch context to the new TestDB database:

    USE TestDB

  2. Create new table named Inventory:

    CREATE TABLE Inventory (id INT, name NVARCHAR(50), quantity INT)

  3. Insert data into the new table:

    INSERT INTO Inventory VALUES (1, 'banana', 150); INSERT INTO Inventory VALUES (2, 'orange', 154);

  4. Type GO to execute the previous commands:

    GO

Select data

Now, run a query to return data from the Inventory table.

  1. From the sqlcmd command prompt, enter a query that returns rows from the Inventory table where the quantity is greater than 152:

    SELECT * FROM Inventory WHERE quantity > 152;

  2. Execute the command:

    GO

Exit the sqlcmd command prompt

  1. To end your sqlcmd session, type QUIT:

    QUIT

  2. To exit the interactive command-prompt in your container, type exit. Your container continues to run after you exit the interactive bash shell.

Connect from outside the container

You can also connect to the Azure SQL Edge instance on your Docker machine from any external Linux, Windows, or macOS tool that supports SQL connections. For more information on connecting to a SQL Edge container from outside, refer Connect and Query Azure SQL Edge.

Remove your container

If you want to remove the Azure SQL Edge container used in this tutorial, run the following commands:

sudo docker stop azuresqledge
sudo docker rm azuresqledge

Warning

Stopping and removing a container permanently deletes any Azure SQL Edge data in the container. If you need to preserve your data, create and copy a backup file out of the container or use a container data persistence technique.

Next Steps