Quickstart: Diagnose a virtual machine network traffic filter problem using the Azure portal
In this quickstart, you deploy a virtual machine (VM), and then check communications to an IP address and URL and from an IP address. You determine the cause of a communication failure and how you can resolve it.
If you don't have an Azure subscription, create a free account before you begin.
Log in to Azure
Log in to the Azure portal at https://portal.azure.com.
Create a VM
Select + Create a resource found on the upper, left corner of the Azure portal.
Select Compute, and then select Windows Server 2016 Datacenter or a version of Ubuntu Server.
Enter, or select, the following information, accept the defaults for the remaining settings, and then select OK:
Setting Value Name myVm User name Enter a user name of your choosing. Password Enter a password of your choosing. The password must be at least 12 characters long and meet the defined complexity requirements. Subscription Select your subscription. Resource group Select Create new and enter myResourceGroup. Location Select East US
Select a size for the VM and then select Select.
Under Settings, accept all the defaults, and select OK.
Under Create of the Summary, select Create to start VM deployment. The VM takes a few minutes to deploy. Wait for the VM to finish deploying before continuing with the remaining steps.
Test network communication
To test network communication with Network Watcher, first enable a network watcher in at least one Azure region, and then use Network Watcher's IP flow verify capability.
Enable network watcher
If you already have a network watcher enabled in at least one region, skip to Use IP flow verify.
In the portal, select All services. In the Filter box, enter Network Watcher. When Network Watcher appears in the results, select it.
Enable a network watcher in the East US region, because that's the region the VM was deployed to in a previous step. Select Regions, to expand it, and then select ... to the right of East US, as shown in the following picture:
Select Enable Network Watcher.
Use IP flow verify
When you create a VM, Azure allows and denies network traffic to and from the VM, by default. You might later override Azure's defaults, allowing or denying additional types of traffic.
In the portal, select All services. In the All services Filter box, enter Network Watcher. When Network Watcher appears in the results, select it.
Select IP flow verify, under NETWORK DIAGNOSTIC TOOLS.
Select your subscription, enter or select the following values, and then select Check, as shown in the picture that follows:
Setting Value Resource group Select myResourceGroup Virtual machine Select myVm Network interface myvm - The name of the network interface the portal created when you created the VM is different. Protocol TCP Direction Outbound Local IP address 10.0.0.4 Local port 60000 Remote IP address 184.108.40.206 - One of the addresses for <www.bing.com>. Remote port 80
After a few seconds, the result returned informs you that access is allowed because of a security rule named AllowInternetOutbound. When you ran the check, Network Watcher automatically created a network watcher in the East US region, if you had an existing network watcher in a region other than the East US region before you ran the check.
Complete step 3 again, but change the Remote IP address to 172.31.0.100. The result returned informs you that access is denied because of a security rule named DefaultOutboundDenyAll.
Complete step 3 again, but change the Direction to Inbound, the Local port to 80 and the Remote port to 60000. The result returned informs you that access is denied because of a security rule named DefaultInboundDenyAll.
Now that you know which security rules are allowing or denying traffic to or from a VM, you can determine how to resolve the problems.
View details of a security rule
To determine why the rules in steps 3-5 of Use IP flow verify allow or deny communication, review the effective security rules for the network interface in the VM. In the search box at the top of the portal, enter myvm. When the myvm (or whatever the name of your network interface is) network interface appears in the search results, select it.
Select Effective security rules under SUPPORT + TROUBLESHOOTING, as shown in the following picture:
In step 3 of Use IP flow verify, you learned that the reason the communication was allowed is because of the AllowInternetOutbound rule. You can see in the previous picture that the DESTINATION for the rule is Internet. It's not clear how 220.127.116.11, the address you tested in step 3 of Use IP flow verify, relates to Internet though.
Select the AllowInternetOutBound rule, and then select Destination, as shown in the following picture:
One of the prefixes in the list is 18.104.22.168/6, which encompasses the 22.214.171.124-126.96.36.199 range of IP addresses. Since 188.8.131.52 is within that address range, the AllowInternetOutBound rule allows the outbound traffic. Additionally, there are no higher priority (lower number) rules shown in the picture in step 2 that override this rule. Close the Address prefixes box. To deny outbound communication to 184.108.40.206, you could add a security rule with a higher priority, that denies port 80 outbound to the IP address.
When you ran the outbound check to 220.127.116.11 in step 4 of Use IP flow verify, you learned that the DefaultOutboundDenyAll rule denied communication. That rule equates to the DenyAllOutBound rule shown in the picture in step 2 that specifies 0.0.0.0/0 as the DESTINATION. This rule denies the outbound communication to 18.104.22.168, because the address is not within the DESTINATION of any of the other Outbound rules shown in the picture. To allow the outbound communication, you could add a security rule with a higher priority, that allows outbound traffic to port 80 for the 22.214.171.124 address.
When you ran the inbound check from 126.96.36.199 in step 5 of Use IP flow verify, you learned that the DefaultInboundDenyAll rule denied communication. That rule equates to the DenyAllInBound rule shown in the picture in step 2. The DenyAllInBound rule is enforced because no other higher priority rule exists that allows port 80 inbound to the VM from 172.31.0.100. To allow the inbound communication, you could add a security rule with a higher priority, that allows port 80 inbound from 172.31.0.100.
The checks in this quickstart tested Azure configuration. If the checks return expected results and you still have network problems, ensure that you don't have a firewall between your VM and the endpoint you're communicating with and that the operating system in your VM doesn't have a firewall that is allowing or denying communication.
Clean up resources
When no longer needed, delete the resource group and all of the resources it contains:
- Enter myResourceGroup in the Search box at the top of the portal. When you see myResourceGroup in the search results, select it.
- Select Delete resource group.
- Enter myResourceGroup for TYPE THE RESOURCE GROUP NAME: and select Delete.
In this quickstart, you created a VM and diagnosed inbound and outbound network traffic filters. You learned that network security group rules allow or deny traffic to and from a VM. Learn more about security rules and how to create security rules.
Even with the proper network traffic filters in place, communication to a VM can still fail, due to routing configuration. To learn how to diagnose VM network routing problems, see Diagnose VM routing problems or, to diagnose outbound routing, latency, and traffic filtering problems, with one tool, see Connection troubleshoot.