Create a managed image of a generalized VM in Azure

Applies to: ✔️ Windows VMs

A managed image resource can be created from a generalized virtual machine (VM) that is stored as either a managed disk or an unmanaged disk in a storage account. The image can then be used to create multiple VMs. For information on how managed images are billed, see Managed Disks pricing.

One managed image supports up to 20 simultaneous deployments. Attempting to create more than 20 VMs concurrently, from the same managed image, may result in provisioning timeouts due to the storage performance limitations of a single VHD. To create more than 20 VMs concurrently, use a Shared Image Galleries image configured with 1 replica for every 20 concurrent VM deployments.

Prerequisites

You need a generalized VM in order to create an image.

Create a managed image in the portal

  1. Go to the Azure portal to manage the VM image. Search for and select Virtual machines.

  2. Select your VM from the list.

  3. In the Virtual machine page for the VM, on the upper menu, select Capture.

    The Create image page appears.

  4. For Name, either accept the pre-populated name or enter a name that you would like to use for the image.

  5. For Resource group, either select Create new and enter a name, or select a resource group to use from the drop-down list.

  6. If you want to delete the source VM after the image has been created, select Automatically delete this virtual machine after creating the image.

  7. If you want the ability to use the image in any availability zone, select On for Zone resiliency.

  8. Select Create to create the image.

After the image is created, you can find it as an Image resource in the list of resources in the resource group.

Create an image of a VM using PowerShell

Creating an image directly from the VM ensures that the image includes all of the disks associated with the VM, including the OS disk and any data disks. This example shows how to create a managed image from a VM that uses managed disks.

Before you begin, make sure that you have the latest version of the Azure PowerShell module. To find the version, run Get-Module -ListAvailable Az in PowerShell. If you need to upgrade, see Install Azure PowerShell on Windows with PowerShellGet. If you are running PowerShell locally, run Connect-AzAccount to create a connection with Azure.

Note

If you would like to store your image in zone-redundant storage, you need to create it in a region that supports availability zones and include the -ZoneResilient parameter in the image configuration (New-AzImageConfig command).

To create a VM image, follow these steps:

  1. Create some variables.

     $vmName = "myVM"
     $rgName = "myResourceGroup"
     $location = "EastUS"
     $imageName = "myImage"
    
  2. Make sure the VM has been deallocated.

     Stop-AzVM -ResourceGroupName $rgName -Name $vmName -Force
    
  3. Set the status of the virtual machine to Generalized.

    Set-AzVm -ResourceGroupName $rgName -Name $vmName -Generalized
    
  4. Get the virtual machine.

     $vm = Get-AzVM -Name $vmName -ResourceGroupName $rgName
    
  5. Create the image configuration.

     $image = New-AzImageConfig -Location $location -SourceVirtualMachineId $vm.Id 
    
  6. Create the image.

    New-AzImage -Image $image -ImageName $imageName -ResourceGroupName $rgName
    

Create an image from a managed disk using PowerShell

If you want to create an image of only the OS disk, specify the managed disk ID as the OS disk:

  1. Create some variables.

     $vmName = "myVM"
     $rgName = "myResourceGroup"
     $location = "EastUS"
     $imageName = "myImage"
    
  2. Get the VM.

    $vm = Get-AzVm -Name $vmName -ResourceGroupName $rgName
    
  3. Get the ID of the managed disk.

     $diskID = $vm.StorageProfile.OsDisk.ManagedDisk.Id
    
  4. Create the image configuration.

     $imageConfig = New-AzImageConfig -Location $location
     $imageConfig = Set-AzImageOsDisk -Image $imageConfig -OsState Generalized -OsType Windows -ManagedDiskId $diskID
    
  5. Create the image.

    New-AzImage -ImageName $imageName -ResourceGroupName $rgName -Image $imageConfig
    

Create an image from a snapshot using PowerShell

You can create a managed image from a snapshot of a generalized VM by following these steps:

  1. Create some variables.

     $rgName = "myResourceGroup"
     $location = "EastUS"
     $snapshotName = "mySnapshot"
     $imageName = "myImage"
    
  2. Get the snapshot.

    $snapshot = Get-AzSnapshot -ResourceGroupName $rgName -SnapshotName $snapshotName
    
  3. Create the image configuration.

     $imageConfig = New-AzImageConfig -Location $location
     $imageConfig = Set-AzImageOsDisk -Image $imageConfig -OsState Generalized -OsType Windows -SnapshotId $snapshot.Id
    
  4. Create the image.

    New-AzImage -ImageName $imageName -ResourceGroupName $rgName -Image $imageConfig
    

Create an image from a VM that uses a storage account

To create a managed image from a VM that doesn't use managed disks, you need the URI of the OS VHD in the storage account, in the following format: https://mystorageaccount.blob.core.windows.net/vhdcontainer/vhdfilename.vhd. In this example, the VHD is in mystorageaccount, in a container named vhdcontainer, and the VHD filename is vhdfilename.vhd.

  1. Create some variables.

    $vmName = "myVM"
    $rgName = "myResourceGroup"
    $location = "EastUS"
    $imageName = "myImage"
    $osVhdUri = "https://mystorageaccount.blob.core.windows.net/vhdcontainer/vhdfilename.vhd"
    
  2. Stop/deallocate the VM.

     Stop-AzVM -ResourceGroupName $rgName -Name $vmName -Force
    
  3. Mark the VM as generalized.

     Set-AzVm -ResourceGroupName $rgName -Name $vmName -Generalized	
    
  4. Create the image by using your generalized OS VHD.

    $imageConfig = New-AzImageConfig -Location $location
    $imageConfig = Set-AzImageOsDisk -Image $imageConfig -OsType Windows -OsState Generalized -BlobUri $osVhdUri
    $image = New-AzImage -ImageName $imageName -ResourceGroupName $rgName -Image $imageConfig
    

Next steps