Troubleshooting guidance for the Azure Monitor agent on Windows virtual machines and scale sets

Article
01/23/2024

Overview for Azure Monitor agent

Before you read further, you must be familiar with Azure Monitor agent and Data Collection Rules.

Terminology

Name	Acronym	Description
Azure Monitor Agent	AMA	The new Azure Monitor agent
Data Collection Rules	DCR	Rules to configure collection of data by the agent, i.e. what to collect, where to send to, and more
Azure Monitor Configuration Service	AMCS	Regional service hosted in Azure, which controls data collection for this agent and other parts of Azure Monitor. The agent calls into this service to fetch DCRs.
Logs endpoint	--	Endpoint for sending data to Log Analytics workspaces
Metrics endpoint	--	Endpoint for sending data to Azure Monitor Metrics databases.
Instance Metadata Service and Hybrid	IMDS and HIMDS	Services hosted in Azure which provide information about currently running virtual machines, scale sets (via IMDS) and Arc-enabled servers (via HIMDS) respectively
Log Analytics workspace	LAW	The destination in Azure Monitor that you can send logs collected by the agent to
Custom Metrics	--	The destination in Azure Monitor that you can send guest metrics collected by the agent to

Basic troubleshooting steps (installation, agent not running, configuration issues)

Follow the steps below to troubleshoot the latest version of the Azure Monitor agent running on your Windows virtual machine:

Carefully review the prerequisites here.
Verify that the extension was successfully installed and provisioned, which installs the agent binaries on your machine:
1. Open Azure portal > select your virtual machine > Open Settings : Extensions + applications from the pane on the left > 'AzureMonitorWindowsAgent'should show up with Status: 'Provisioning succeeded'
2. If not, check if machine can reach Azure and find the extension to install using the command below:
```
az vm extension image list-versions --location <machine-region> --name AzureMonitorWindowsAgent --publisher Microsoft.Azure.Monitor
```
3. Wait for 10-15 minutes as extension maybe in transitioning status. If it still doesn't show up, uninstall and install the extension again and repeat the verification to see the extension show up.
4. If not, check if you see any errors in extension logs located at C:\WindowsAzure\Logs\Plugins\Microsoft.Azure.Monitor.AzureMonitorWindowsAgent on your machine
5. If none of the above helps, file a ticket with Summary as 'AMA extension fails to install or provision' and Problem type as 'I need help with Azure Monitor Windows Agent'.
Verify that the agent is running:
1. Check if the agent is emitting heartbeat logs to Log Analytics workspace using the query below. Skip if 'Custom Metrics' is the only destination in the DCR:
```
Heartbeat | where Category == "Azure Monitor Agent" and 'Computer' == "<computer-name>" | take 10
```
2. If not, open Task Manager and check if 'MonAgentCore.exe' process is running. If it is, wait for 5 minutes for heartbeat to show up.
3. If not, check if you see any errors in core agent logs located at C:\WindowsAzure\Resources\AMADataStore.<virtual-machine-name>\Configuration on your machine
4. If none of the above helps, file a ticket with Summary as 'AMA extension provisioned but not running' and Problem type as 'I need help with Azure Monitor Windows Agent'.
Verify that the DCR exists and is associated with the virtual machine:
1. If using Log Analytics workspace as destination, verify that DCR exists in the same physical region as the Log Analytics workspace.
2. On your virtual machine, verify the existence of the file C:\WindowsAzure\Resources\AMADataStore.<virtual-machine-name>\mcs\mcsconfig.latest.xml. If this file doesn't exist:
  - The virtual machine may not be associated with a DCR. See step 3
  - The virtual machine may not have Managed Identity enabled. See here on how to enable.
  - IMDS service isn't running/accessible from the virtual machine. Check if you can access IMDS from the machine. If not, file a ticket with Summary as 'IMDS service not running' and Problem type as 'I need help configuring data collection from a VM'.
  - AMA can't access IMDS. Check if you see IMDS errors in C:\WindowsAzure\Resources\AMADataStore.<virtual-machine-name>\Tables\MAEventTable.tsf file. If yes, file a ticket with Summary as 'AMA cannot access IMDS' and Problem type as 'I need help configuring data collection from a VM'.
3. Open Azure portal > select your data collection rule > Open Configuration : Resources from the pane on the left > You should see the virtual machine listed here
4. If not listed, click 'Add' and select your virtual machine from the resource picker. Repeat across all DCRs.
5. If none of the above helps, file a ticket with Summary as 'DCR not found or associated' and Problem type as 'I need help configuring data collection from a VM'.
Verify that agent was able to download the associated DCR(s) from AMCS service:
1. Check if you see the latest DCR downloaded at this location C:\WindowsAzure\Resources\AMADataStore.<virtual-machine-name>\mcs\configchunks
2. If not, file a ticket with Summary as 'AMA unable to download DCR config' and Problem type as 'I need help with Azure Monitor Windows Agent'.

Issues collecting Performance counters

Check that your DCR JSON contains a section for 'performanceCounters'. If not, fix your DCR. See how to create DCR or sample DCR.
Check that the file C:\WindowsAzure\Resources\AMADataStore.<virtual-machine-name>\mcs\mcsconfig.lkg.xml exists. If it doesn't exist, file a ticket with Summary as 'AMA didn't run long enough to mark and Problem type as 'I need help with Azure Monitor Windows Agent'.

Open the file and check if it contains CounterSet nodes as shown in the example below:

<CounterSet storeType="Local" duration="PT1M" 
    eventName="c9302257006473204344_16355538690556228697" 
    sampleRateInSeconds="15" format="Factored">
    <Counter>\Processor(_Total)\% Processor Time</Counter>
    <Counter>\Memory\Committed Bytes</Counter>
    <Counter>\LogicalDisk(_Total)\Free Megabytes</Counter>
    <Counter>\PhysicalDisk(_Total)\Avg. Disk Queue Length</Counter>
</CounterSet>

If there are no CounterSet nodes, then the DCR wasn't parsed correctly. File a ticket with Summary as 'AMA unable to parse DCR config' and Problem type as 'I need help with Azure Monitor Windows Agent'.

Issues using 'Custom Metrics' as destination

Carefully review the prerequisites here.
Ensure that the associated DCR is correctly authored to collect performance counters and send them to Azure Monitor metrics. You should see this section in your DCR:
```
"destinations": {  
"azureMonitorMetrics": {  
    "name":"myAmMetricsDest" 
    } 
}
```

Run PowerShell command:

Get-WmiObject Win32_Process -Filter "name = 'MetricsExtension.Native.exe'" | select Name,ExecutablePath,CommandLine | Format-List

Verify that the CommandLine parameter in the output contains the argument "-TokenSource MSI"

Verify C:\WindowsAzure\Resources\AMADataStore.<virtual-machine-name>\mcs\AuthToken-MSI.json file is present.
Verify C:\WindowsAzure\Resources\AMADataStore.<virtual-machine-name>\mcs\CUSTOMMETRIC_<subscription>_<region>_MonitoringAccount_Configuration.json file is present.
Collect logs by running the command C:\Packages\Plugins\Microsoft.Azure.Monitor.AzureMonitorWindowsAgent\<version-number>\Monitoring\Agent\table2csv.exe C:\WindowsAzure\Resources\AMADataStore.<virtual-machine-name>\Tables\MaMetricsExtensionEtw.tsf
1. The command will generate the file 'MaMetricsExtensionEtw.csv'
2. Open it and look for any Level 2 errors and try to fix them.
If none of the above helps, file a ticket with Summary as 'AMA unable to collect custom metrics' and Problem type as 'I need help with Azure Monitor Windows Agent'.

Issues collecting Windows event logs

Check that your DCR JSON contains a section for 'windowsEventLogs'. If not, fix your DCR. See how to create DCR or sample DCR.
Check that the file C:\WindowsAzure\Resources\AMADataStore.<virtual-machine-name>\mcs\mcsconfig.lkg.xml exists. If it doesn't exist, file a ticket with Summary as 'AMA didn't run long enough to mark and Problem type as 'I need help with Azure Monitor Windows Agent'.

Open the file and check if it contains Subscription nodes as shown in the example below:

<Subscription eventName="c9302257006473204344_14882095577508259570" 
query="System!*[System[(Level = 1 or Level = 2 or Level = 3)]]">
    <Column name="ProviderGuid" type="mt:wstr" defaultAssignment="00000000-0000-0000-0000-000000000000">
      <Value>/Event/System/Provider/@Guid</Value>
    </Column>
    ...

    </Column>
</Subscription>

If there are no Subscription, nodes then the DCR wasn't parsed correctly. File a ticket with Summary as 'AMA unable to parse DCR config' and Problem type as 'I need help with Azure Monitor Windows Agent'.

File a ticket

Open a data collection rule and on the menu on the left, select New Support Request. You can also open the Help + support pane and select Create a support request.
Select:
- Issue type: Technical.
- Subscription: Select the subscription where your machines reside.
- Service type: Data collection rules and Azure Monitor Agent.
- Is your issue related to a resource?: Yes. Select your machine by using the resource picker.
Enter Summary and Problem type as indicated from the troubleshooting steps. Accurate information leads to faster resolution of the issue.
Select Next and review the recommended solutions to see if they help.
If they don't help, select Next and fill in the next set of details.
Select Next, review the final details, and select Create.