question

SeemaKanwalGurmani-8582 avatar image
0 Votes"
SeemaKanwalGurmani-8582 asked SeemaKanwalGurmani-8582 commented

Failover Clustering Manager

Dear Community,

I have total of three Cluster Nodes CS1,CS2 and CS3. I have a role Catalyst-Test on Cluster Node 1 i.e. CS1 and I am migrating the role from CS1 to CS2 but it fails. While when I move it to another node CS3 it successfully migrates.
Here is the Event Log Detail:54180-cluster-event-error.png



Kindly help me out.

windows-server-2012windows-server-clustering
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

AlexBykovskyi avatar image
0 Votes"
AlexBykovskyi answered

Hey,

You can try enabling CPU compatibility mode for the VM.
https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-r2-and-2012/dn859550(v=ws.11)

In addition, check if the shared storage is properly connected to every host in the cluster. In case you need shared storage option StarWind VSAN can be used. Might help:
https://www.starwindsoftware.com/resource-library/starwind-virtual-san-3-node-hyperconverged-scenario-with-windows-server-2016/

Cheers,

Alex Bykovskyi

StarWind Software

Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

XiaoweiHe-MSFT avatar image
0 Votes"
XiaoweiHe-MSFT answered

Hi,

  1. Does the Node CS2 has the same hardware and system settings as the other two nodes?

  2. Please check the event viewer both on CS1 and CS2, check if there's any error.

  3. Besides, please check if we can move the role from CS3 to CS2.

Thanks for your time!
Best Regards,
Anne


If the Answer is helpful, please click "Accept Answer" and upvote it.

Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

SeemaKanwalGurmani-8582 avatar image
0 Votes"
SeemaKanwalGurmani-8582 answered

Yes they are all identical and there is a pool created for storage.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

SeemaKanwalGurmani-8582 avatar image
0 Votes"
SeemaKanwalGurmani-8582 answered

We have an IBM Blade Server & It has three computes, all are identical.We have created a storage pool of all three computes.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

SeemaKanwalGurmani-8582 avatar image
0 Votes"
SeemaKanwalGurmani-8582 answered

Also I just tested and found out that I am not able to migrate any role from CS3 to CS2 either.
So final points:

Migration from CS1 to CS3 and vice versa.
Migration from CS1 & CS3 to CS2 and vice versa.
I just found out an Event in Hyper V in CS2, I am attaching it below:

54358-error-in-hyper-v-manager-on-cs2.png



5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

XiaoweiHe-MSFT avatar image
0 Votes"
XiaoweiHe-MSFT answered SeemaKanwalGurmani-8582 commented

Hi,

According to the error message, it seems the CS2 has a different processer from the other two nodes, however, according to your description, they are all the same.

  1. Please try to enable "Processer compatibility" on the VMs, check if it could work:


55509-image.png

  1. It's recommended to confirm if the CS2 has the same hardware settings as the other two.


Thanks for your time!
Best Regards,
Anne


If the Answer is helpful, please click "Accept Answer" and upvote it.

Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.


image.png (52.2 KiB)
· 2
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Hi,

I would like to check if the reply could be of help? If yes, please help accept answer, so that others meet a similar issue can find useful information quickly. If you have any other concerns or questions, please feel free to feedback.

Best Regards,
Anne

0 Votes 0 ·

Yes after applying above settings it did migrate the machine but we did not have to do this previously as we have cluster created since 2014 and we had no problem with it. We could migrate without any problem. But why all of a sudden we are facing this issue. Please let me know If you have any suggestions.


Thanks.

0 Votes 0 ·