question

PhilipMBuckalew-3936 avatar image
0 Votes"
PhilipMBuckalew-3936 asked MarcelvanWort-6638 answered

Azure Fundamentals Training

I am currently in the step 4 of section 2 where you build a VM using the WordPress example. After following the steps, I am receiving the following error message:

"Resource 'ServicePlane8f85340-a5b8' was disallowed by policy..."

The raw message is as follows:

The client 'live.com#philip.xxxxxxx@gmail.com' with object id 'fc38e633-a40b-4e80-b4aa-f5e17592d52d' does not have authorization to perform action 'Microsoft.Authorization/policyAssignments/read' over scope '/providers/Microsoft.Management/managementGroups/triplecrown2/providers/Microsoft.Authorization/policyAssignments/7bb64c0aa90247de8b4491c3' or the scope is invalid. If access was recently granted, please refresh your credentials. (Code: AuthorizationFailed)

I have tried several time making sure I did not miss something. Shouldn't I have the proper credentials in place to do certification training by default? Can't get beyond this issue.

azure-webapps
· 1
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Hi Philip - I assume you have NOT successfully authorized the sandbox please recheck and try

0 Votes 0 ·
VaibhavChaudhari avatar image
0 Votes"
VaibhavChaudhari answered

I have faced the authorization issues too while learning on Microsoft Learn.

Sometimes log out and log in to the portal used to work, else I used to move on to the next lesson and try the pending hands on Module later by activating sandbox newly.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Sirlupinwatson avatar image
0 Votes"
Sirlupinwatson answered

Hi there @PhilipMBuckalew-3936

You can also go into group management, or management policies,

Grand the user you want to use a special role or approved for futur actions.

I had to grant even myself a permission from my own administration center.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Sirlupinwatson avatar image
0 Votes"
Sirlupinwatson answered

Set it up in Microsoft Azure, i can't remember where exatly sorry about that,

But this was at the very beginning. For mostly every job that you want to run, you have to have group policies and security, level acces, Admin acces etc. that you do by yourself since you the creator of the scene

You will find it, i might try to see for you , brb in 2 min

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Sirlupinwatson avatar image
0 Votes"
Sirlupinwatson answered

@PhilipMBuckalew-3936 Here is where you need to look for i think this is the right place.

All services
Management groups
Access control (IAM)

You can add different roles, if i was you, i would set myself as a admin, then you have less limitations.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

ajkuma-MSFT avatar image
0 Votes"
ajkuma-MSFT answered ajkuma-MSFT edited

@PhilipMBuckalew-3936, Adding to the suggestions posted above & checking in to see if the above post helped answer your question. Kindly let us know if you have any further questions on this specific topic, we would be more than happy to assist you.
Please do mark the post which was helpful by clicking on ‘Accept Answer’ & ‘Up-Vote’ to help the community find the right answers.


You may also receive the errors for one of these reasons:

  • The required resource provider hasn't been registered for your subscription

  • API version not supported for the resource type

  • Location not supported for the resource type

  • For auto-shutdown of VMs, the Microsoft.DevTestLab resource provider must be registered.

  • Azure Policy scoped settings.

Register the resource provider of the type you're trying to deploy and also review the Azure Policy for any restrictions.






5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

RemcoNL avatar image
0 Votes"
RemcoNL answered

I faced the same issue, I use multiple microsoft accounts for work and mixed during the day.

You can try:
1. Incognito window
2. From the learing page where you can "click" to go to the azure page,
"right click" Open in new window, to make sure the portal is linked to the learning sandbox.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

vahidmohammadnia-5977 avatar image
0 Votes"
vahidmohammadnia-5977 answered

This usually happens when you do not provide the parameters correct. In my case, I had recreated sandbox, each time a new resource group is created. Make sure to use the new one and include "learn" at the beginning of its name. If you still have the issues log out from both learning hub and portal and open both at Incognito window, again make sure that use the complete name of new resource group name.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

CARLOSANTONIOJIMENEZDIAZ-3775 avatar image
0 Votes"
CARLOSANTONIOJIMENEZDIAZ-3775 answered niksli432-6082 Suspended commented

BUENAS NOCHES, COMO SE TOMA UN ORDEN DEL CURSO DE Azure fundamentals, ??? tENGO UN DOCUMENTRO DE 12 MODULOS, COMO SE INICIA EN ESTA PLATAFORMA. ATENTOS A SUS COMENTARIOS.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

RajendraKonathala-2125 avatar image
0 Votes"
RajendraKonathala-2125 answered

Noone mentioned what exactly the solution is!!!

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

IliyasMansuree-3947 avatar image
0 Votes"
IliyasMansuree-3947 answered

The solution is to click on advanced and create a storage bucket without space, uppercase and hiphen..

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.