Failover Cluster adding additional interfaces

Question

question

57155262 asked · Mar 03 at 08:55 AM

Failover Cluster adding additional interfaces

There are two hosts in the cluster, the cluster has two meshes, client and heartbeat. On each host, the network card has 4 physical interfaces, here and now one interface is used, is it possible to add to the existing team and raise the speed from 2Gbps to 6Gbps?

windows-server-clustering

10 |1000 characters needed characters left characters exceeded

Attachments: Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Answer 1 · 2021-03-04T06:21:19.207Z

XiaoweiHe-MSFT answered · Mar 04 at 06:21 AM

Hi,

Do you mean you would like to use the remaining physical interface on the hosts to form NIC teaming, and suspect to use 3x 2GB NIC for form NIC teaming to increase the speed to 6GB?

If so, you may try to form the NICs with the following NIC teaming mode:

Teaming mode: LACP

Load balance mode: Address Hash

Besides, we need to ensure the Switch device support LACP.

https://docs.microsoft.com/en-us/windows-server/networking/technologies/nic-teaming/nic-teaming-settings

Thanks for your time!
Best Regards,
Anne

If the Answer is helpful, please click "Accept Answer" and upvote it.
Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.

· 1 ·

10 |1000 characters needed characters left characters exceeded

Attachments: Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

XiaoweiHe-MSFT · Mar 15 at 03:18 AM

Hi,

I would like to check if the reply could be of help? If yes, please help accept answer, so that others meet a similar issue can find useful information quickly. If you have any other concerns or questions, please feel free to feedback.

Best Regards,
Ann

0 ·

question