question

pasongsong3-3065 avatar image
0 Votes"
pasongsong3-3065 asked pasongsong3-3065 commented

ncsi " no internet "

I am using windows 10. Appears as no internet connection. Ping out to www.msftconnecttest.com. Symptoms occur after the first attempt to connect to the corresponding ssid, and in other cases, "no internet connection" occurs occasionally. I don't want to change the register. If you are attached to the network in another area, it has never been like this. However, if you stick to this network, problems arise. Both wired and wireless occur. Do you know how to fix it?

windows-10-network
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

KapilArya avatar image
0 Votes"
KapilArya answered

Hello, 

Please run Network Adapter troubleshooter from Settings app > Update & security > Troubleshoot > Additional troubleshooters. Let us know what it reports back. 

Regards.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

pasongsong3-3065 avatar image
0 Votes"
pasongsong3-3065 answered

At the moment when "No Internet Connection" pops up for about 5 seconds, "Troubleshooting" is executed, but it says "I can't find the problem by solving the problem."

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

CandyLuo-MSFT avatar image
0 Votes"
CandyLuo-MSFT answered

Hi ,

Before we go further, I would like to confirm the following questions:

  1. Do you have internet access when NCSI reports no internet?

  2. What's the OS version of your windows 10? 2004 or 20H2?

  3. Is NCSI Active Probing enabled?

    HKLM\SYSTEM\CurrentControlSet\Services\NlaSvc\Parameters\Internet\EnableActiveProbing

    should present with value 1.

    HKLM\Software\Policies\Microsoft\Windows\NetworkConnectivityStatusIndicator
    NoActiveProbe

    should either not present, or value must be 0.

  4. Does the Network Connection icon show a red X, yellow bang, or globe in the system tray?

  5. Does the network card in Device Manager or Network Connections control panel show a red X or yellow bang?

  6. If you indeed have internet access, does restarting the Network Location Awareness (NLA) service fix the issue?

Best Regards,

Candy


If the Answer is helpful, please click "Accept Answer" and upvote it.

Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

pasongsong3-3065 avatar image
0 Votes"
pasongsong3-3065 answered CandyLuo-MSFT commented
  1. Yes (ex: www.msftconnecttest.com, 8.8.8.8 ping ok)
    2.windows 10 pro 10.0.18363
    3.HKLM\Software\Policies\Microsoft\Windows\NetworkConnectivityStatusIndicator
    NoActiveProbe
    The value is 0.

  2. Comes out as a globe.

  3. It doesn't happen.

  4. This pc is joined to Active Directory, so it does not have permission.

· 1
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

1.Have you checked the registry value of EnableActiveProbing is 1?

2.Make sure you have patched your windows 10 with fully windows updates:

Windows 10 update history

3.Check NCSI event logs to see if there are something related:

Path: Microsoft\Windows\NCSI\Operational

4.Are proxies or hotspots present in the problem environment?

5.Did you have VPN connection in your environment?



0 Votes 0 ·
pasongsong3-3065 avatar image
0 Votes"
pasongsong3-3065 answered

76399-enableactiveprobing.png




  1. There is no "EnableActiveProbing".

  2. We don't have any other workplaces, and we're having this problem in our current workplace. This symptom occurs only on one side with the same PC.

  3. There is no Microsoft \ Windows \ NCSI \ Operational path. "Microsoft \ Windows" only comes up to this point.

  4. Some have hotspots, and some do not.

  5. Not connected.

Currently, this PC is not the only problem, but several PCs have the same symptoms.


5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

CandyLuo-MSFT avatar image
0 Votes"
CandyLuo-MSFT answered

In registry, you should have a internet folder under Parameters. As picture below:

76527-image.png

Go to other computers and check whether the registry keys are missing.


image.png (74.3 KiB)
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

pasongsong3-3065 avatar image
0 Votes"
pasongsong3-3065 answered pasongsong3-3065 commented

It is on another PC, but not on this PC.

· 1
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

It's not just this pc's problem. Other PCs also have problems.

And the globe doesn't keep popping up.

Occurs when initially connected to a network, or sometimes a globe appears when connected.

0 Votes 0 ·
CandyLuo-MSFT avatar image
0 Votes"
CandyLuo-MSFT answered

From windows side, we need to find a problematic PC and then do troubleshooting. Like check NCSI event logs to find any clues.

If one of machine's problems is solved, then we can use the same method to solve the problems on the other computers. So you can find a machine whose registry shows normal and do the troubleshooting as above.











5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

pasongsong3-3065 avatar image
0 Votes"
pasongsong3-3065 answered CandyLuo-MSFT commented

You said "From windows side, we need to find a problematic PC and then do troubleshooting. Like check NCSI event logs to find any clues." What should I do?

I said in the reply above, "There is no Microsoft \ Windows \ NCSI \ Operational path. "Microsoft \ Windows" only comes up to this point."

· 1
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

This is an abnormal phenomenon that the machine has no Microsoft \ Windows \ NCSI \ Operational path and missing registry key. And as I said above, find a machine whose registry shows normal and has NCSI event log to do the above troubleshooting.

0 Votes 0 ·
pasongsong3-3065 avatar image
0 Votes"
pasongsong3-3065 answered CandyLuo-MSFT commented

I found the route,
HKLM\Software\Policies\Microsoft\Windows\NetworkConnectivityStatusIndicator
NoActiveProbe

Value is 0

· 1
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.


EnableActiveProbing should also present in HKLM\SYSTEM\CurrentControlSet\Services\NlaSvc\Parameters\Internet.

0 Votes 0 ·