question

Helga35-5558 avatar image
0 Votes"
Helga35-5558 asked ChavaliRavi-4610 commented

WDS/MDT Lenovo T14 Gen 2 Missing drivers

Hello,
I attempting to image T14 (ThinkPad T14 Gen 2 20W0003HIV) via MDT.
After OS is installed, the system reboots into the actual OS and the system is missing all drivers, most important are the network drivers.

Installing Windows 10 20h2. I've downloaded the right SCCM package from Lenovo & imported the "tp_t14-t15-p14s-p15s-gen2_w1064_20h2_202102.exe" from here: https://support.lenovo.com/us/en/downloads/ds549249 Also tried other driver packs and I see the same behavior.
I have used Deployment Recipe Cards with WMI Queries from Lenovo : https://download.lenovo.com/cdrt/recipes/tp_t14gen2i_w1064.pdf

Since importing these T14 drivers I have successfully imaged other systems, T480 & x280 with all drivers with no special problem.

Tried to disable DMA Protection from the Virtualization menu.

I'm targeting drivers in 'total control' method according to this article: https://www.deploymentresearch.com/mdt-2013-lite-touch-driver-management/

I have the recent ADK & WinPE addon

Does anyone have any idea what might be causing this or what I should specifically be looking for in the logs from the systems?


Thank you,

mem-mdt
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

AllenLiu-MSFT avatar image
0 Votes"
AllenLiu-MSFT answered

Hi, @Helga35-5558
Thank you for posting in Microsoft Q&A forum.
I found the similar issue in Lenovo Community, according to that thread, we may first check below:
1. Added the drivers to Out-of-Box drivers.
2. Rebuild the boot image.
3. Create new boot image in WDS.
4. Do you have Inject Drivers steps in your task sequence, with correct selection profile selected, and install all drivers options checked?

For more details:
https://forums.lenovo.com/t5/Enterprise-Client-Management/T14-and-L15-MDT-Boot-fail-PCI-VEN-and-DHCP-error/m-p/5059323?page=1#5226737
(Please note: Information posted in the given link is hosted by a third party. Microsoft does not guarantee the accuracy and effectiveness of information.)


If the response is helpful, please click "Accept Answer" and upvote it.
Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.


5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

FedericoNahuelGodoy-0519 avatar image
0 Votes"
FedericoNahuelGodoy-0519 answered ChavaliRavi-4610 commented

Having the same issue. The machine boots, formats the disk etc but fails at the time of applying os image.
Sometimes it wants to go but most of the time fails applying the wim file.
My windows ADK is the most recent one, updated from a 2019 version to a new one.
The only workarround is using an usb-lan adapter and booting/installing from there. After that, the machines works just fine.

I'm currently scaling this issue to level 2, 3 of lenovo support with a lot of evidence because they asked me to do that.
Hope this "trick" gets you out of a hurry.

· 1
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Yes, Me too getting same issue, is it resolved for you

0 Votes 0 ·