question

alannewcomer-7454 avatar image
0 Votes"
alannewcomer-7454 asked DSPatrick commented

setting server 2019 security to win 10 or win 7 levels

I installed server 2019 not because I have a server or need to run a server set up.
But my dual processor server board (I do 3d graphics) flatly refused to upgrade to win 10
Tried for two weeks multiple times and then took same installer and in one try in upgraded my single processor machine
so figured it was the dual processors -- even though 10 is supposed to support duals.


So got server ... installed first try, yes.
Well no. The server package (and yes I've done computers since 1975, so I can appreciate it want's to be secure).
But current setting not only won't let my download Chrome ... it won't let me down load Edge either.


I did find some places to change some allow input settings for private and public networks
but then server gets paranoid .. OMG we're all going to die -- I'm unprotected!
So what settings will let me go to the net and basically do the same stuff I've done for years without getting viruses
and not turn off the protection?


I have vague memories of setting protocols etc for hooking terminals to a 370/138 but I doubt any data I could retrieve from my memory banks will help with this issue.

windows-server-security
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

DSPatrick avatar image
0 Votes"
DSPatrick answered DSPatrick edited

In Server Manager turn off

114708-image.png

also try backing off the level here.
114795-image.png

and or adjust the Security settings here.

114814-image.png




--please don't forget to upvote and Accept as answer if the reply is helpful--





image.png (39.2 KiB)
image.png (31.8 KiB)
image.png (80.3 KiB)
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

alannewcomer-7454 avatar image
0 Votes"
alannewcomer-7454 answered

thank you much... will try that later tonight as in order to access the net again .. I had to pop out the server drive and put in the 7 drive.
will send feedback tomorrow.


5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

DSPatrick avatar image
0 Votes"
DSPatrick answered

Sounds good, you're welcome.

--please don't forget to upvote and Accept as answer if the reply is helpful--





5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

DaisyZhou-MSFT avatar image
0 Votes"
DaisyZhou-MSFT answered

Hello @alannewcomer-7454,

Thank you for posting here.

Hope the information provided by DSPatrick is helpful to you.

Should you have any question or concern, please feel free to let us know.


Best Regards,
Daisy Zhou

============================================
If the Answer is helpful, please click "Accept Answer" and upvote it.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

alannewcomer-7454 avatar image
0 Votes"
alannewcomer-7454 answered DSPatrick commented

Perfect ... first image got me to right place ... and 2nd and 3rd where the settings in place and since I'm replying on the server, things are good.


Thanks to all who looked and replied.


Will I remember this? Probably not, since it isn't going to be in my daily work flow.
But doing things like saving the pictures above and adding them to the 30 some TB of data drives in this computer, I will know where to look next time.

· 1
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Sounds good, you're welcome.




0 Votes 0 ·