question

EavenHuang avatar image
0 Votes"
EavenHuang asked RickSomeone-1151 commented

MDT capture failed then unable to install via MDT

Dear experts,

I'm running into an odd issue that I tried to capture image via MDT but failed, then I tried to re-install an image via MDT but somehow after loading files, it didn't prompt for me to enter credentials. See attached picture.

Any advice would be very appreciated.

119841-mdt-issue.jpg


mem-mdt
mdt-issue.jpg (74.2 KiB)
· 2
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

At this DOS prompt, clear the MDT process from the pc to start clean.....

Type:

  1. Diskpart (enter)

  2. List Disk (enter) - should list one disk, your C: and should be Disk 0

  3. Select Disk 0 (providing that is your OS disk, usually several hundred gig) (enter)

  4. clean (enter)

Hard power down the pc, then boot it back up to MDT, should go right through.



0 Votes 0 ·

Hi @RickSomeone-1151,

Thanks a lot for your suggestion. I will try this out in coming week and let you know how it goes.

Thanks again! This drives me crazy. We have over 50+ PCs and this is the only one that has such issue:(

0 Votes 0 ·
EavenHuang avatar image
0 Votes"
EavenHuang answered RickSomeone-1151 commented

Dear All,

I've been spending quite some time searching around and finally came to a solution, here it is:

     1. At this DOS prompt, clear the MDT process from the pc to start clean..... By using following commands: 
     Type:
     Diskpart (enter)
        
     List Disk (enter) - should list one disk, your C: and should be Disk 0
        
     Select Disk 0 (providing that is your OS disk, usually several hundred gig) (enter)
        
     clean (enter)
     Hard power down the pc, then boot it back up to MDT, it should go right through.

Thanks a lot for all your help and hopefully if anyone else encountered this issue, they could apply the solution quickly. Cheers.

· 2
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.


Hi,

Thank you very much for sharing! I think maybe other peoples with the same needs will benefit from it. Your solid technical skills are really impressive.

Have a nice day!

Best regards,
Simon

0 Votes 0 ·

No prob. You're welcome.

0 Votes 0 ·
SimonRenMSFT-3639 avatar image
0 Votes"
SimonRenMSFT-3639 answered SimonRenMSFT-3639 commented

Hi,

Thanks for posting in Microsoft Q&A forum.

Could we find any further information in the SMSTS.log and BDD.log?

Best regards,
Simon

· 5
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Hi Simon,

Where can I find these logs?

0 Votes 0 ·

Hi,

Thanks for your reply.

Please check the X:\Windows\Temp or C:\MININT\SMSOSD\OSDLOGS folder. For more information, please refer to:
Troubleshooting Reference for the Microsoft Deployment Toolkit
SCCM: How to copy SMSTS.log when a Task Sequence fails

Best regards,
Simon



0 Votes 0 ·

Hi,

May we know the current status of the question? If there is any chance to try above suggestion? If there is any other assistance we can provide, please feel free to let us know, we will do our best to help you.

Thanks and regards,
Simon

0 Votes 0 ·

Hi @SimonRenMSFT-3639,

I didn't see anything in temp folder, there was no C:\MININT\SMSOSD\OSDLOGS folder via that cmd pane. Any idea?

0 Votes 0 ·
Show more comments