question

jayendrachauhan-7469 avatar image
0 Votes"
jayendrachauhan-7469 asked saldana-msft edited

PXE-E51 NO DHCP or PROXY DHCP offer were received with WDS SCCM

Dear Team ,

kindly support me i getting error PXE-E51 NO DHCP or PROXY DHCP offer were received with WDS.

Below Step done from my side .

Step 1 . PXE enable from DP
Step 2 . WDS installed
Step 3 . 67 , 66 Configured in DHCP Server.

But Still Pxe boot is not working .

Kindly help for the same.

Regards,
Jayendra Chauhan

mem-cm-osdmem-cm-site-deployment
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

1 Answer

SimonRenMSFT-3639 avatar image
0 Votes"
SimonRenMSFT-3639 answered SimonRenMSFT-3639 edited

Hi,

Thanks for posting in Microsoft Q&A forum.

1,Please do not use DHCP options 60,66 and 67 on your DHCP servers. If the options are configured, the DHCP server will masquerade as a PXE server and respond to the client with path to the network boot program, then the PXE may fail. Refer to: You want to PXE Boot? Don't use DHCP Options.

2,IP Helpers must be configured on the routers if any of the DHCP server, the client computer, or the Configuration Manager server that is running WDS and the PXE-enabled DP are on separate subnets or VLANs. IP Helpers are necessary because the PXE request that is generated by the client computer is a broadcast that doesn't travel outside the local subnet or VLAN. If the DHCP server or the WDS/PXE-enabled DP aren't on the same subnet or VLAN as the client computer, they will not see or hear the PXE request broadcast from the client. Therefore, the servers will not respond to the PXE request.

Best regards,
Simon


If the response is helpful, please click "Accept Answer" and upvote it.
Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.


· 1
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Hi,

Hope everything goes well. We haven't heard from you for a few days and would like to know the current status of the problem. If there is any chance to try above suggestions? If there is any other assistance we can provide, please feel free to let us know, we will do our best to help you.

Thanks for your time.

Best regards,
Simon

0 Votes 0 ·