question

hiperflash-4959 avatar image
0 Votes"
hiperflash-4959 asked LimitlessTechnology-2700 answered

win server dhcp

Hi there,

I am having some diffuculties setting up the win server 2019 dhcp on mikrotik.

Little overview of everything i just came to the company and I am not really sure what to look at the mikrotik.
We were using x.x.x.x/23 network, which I would like to change to 2 different subnets.

Since we are going to use local AD and domain I have set up everything on a few VMs (back up server etc..), created 2 new scopes 10.1.2.0/24 & 10.1.3.0/24 on the DHCP server. Is there anyithing else I have to setup on Mikrotik so that I can use Win DHCP without any issues, beside disabling the DHCP?

Now the issue is when you try to access (Synology NAS for example) from network 10.1.3.0/24 to 10.1.2.0/24 network it takes about 1-2 min to load the web interface.

If you connect to the mikrotik VPN everything work smooth as butter, same with the Synology NAS that is on the 10.1.3.0/24.

I am really lost right here.. anyone got some ideas?

windows-dhcp-dns
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

1 Answer

LimitlessTechnology-2700 avatar image
0 Votes"
LimitlessTechnology-2700 answered

Hello @hiperflash-4959

Here the role of DHCP is to provide ip to it clients. Please verify in DHCP scope there are gateway and DNS address are there

Also try to see by giving manual ip of DHCP range to narrow down the issue.

You should also check routing rules in firewall as you mentioned in VPN its working good.

If the reply was helpful, please don’t forget to upvote or accept as answer.

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.