Windows 10 21H2 Dynamic DNS update Problem?

Question

question

Jesslyn-2848 asked Mar 3, '22 Jesslyn-2848 answered Mar 22, '22

Windows 10 21H2 Dynamic DNS update Problem?

Hello!

I think I have a problem with Windows 10 21H2 and Server 2019 (Domain Controller).
We have hundreds of computers with 21H1, and they have no problems.
On our DNS console we configured the zone aging intervals 4 days.
And we only allow secured updates.

Now we make a PoC with W10 21H2.
The clients are after the fresh install ok. After 4 days, they get the globe in the symbolbar which says "no internet". But I can browse in the internet and download stuff. What does not work is all microsoft stuff (like onedrive, store or office registration).
When I check with powershell "Get-NetconnectionProfile" It says IPv4Connectivity: LocalNetwork.

When I then open a cmd and ping 8.8.8.8 it takes a few seconds and the network symbol change to the standard computer symbol and says "connected" If I then check the powershell command it says "IPv4Connectivity: Internet".

I checked the event log and I found this entry:

The system failed to register host (A or AAAA) resource records for network adapter

The reason the system could not register these Ressourcerecords was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative for this name does not support the DNS dynamic update protocol.

To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.

I don't know if there is a connection between these two symptoms.

I tried all the "EnableActiveProbing" stuff and de GPO settings for other MSFT connection tests. Nothing helped.

Does anyone know this problem?
Or does maybe someone have an idea? I'm at the end of mine :(

Thank you!

Best Regards

windows-10-network windows-dhcp-dns

· 1

5 |1600 characters needed characters left characters exceeded

Attachments: Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

KarlieWeng-MSFT · Mar 15 at 07:25 AM

Hi

Is the IP manually configured or DHCP assigned?

2.Which method did you use to update the client's records ?

0 ·

Answer 1 · 2022-03-16T13:08:16.017Z

Jesslyn-2848 answered Mar 16, '22

Hi @KarlieWeng-MSFT

Is the IP manually configured or DHCP assigned?

The IP is DHCP assigned. It shows up in the DHCP and in the DNS (forward and reverse) properly.

2.Which method did you use to update the client's records ?

Under the DHCP options we have this configured:

Best Regards

image.png (22.7 KiB)

5 |1600 characters needed characters left characters exceeded

Attachments: Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Answer 2 · 2022-03-17T05:43:45.083Z

KarlieWeng-MSFT answered Mar 17, '22

Hi

A few things you may check:
1. Check if DNS Client service running normally ;
2. Check the permission on DNS record, client’s computer account should have “Write” permission for Record;

3.Using network monitor capture network trace to check update process.

Best Regards
Karlie

If the Answer is helpful, please click "Accept Answer" and upvote it.

image.png (63.2 KiB)

5 |1600 characters needed characters left characters exceeded

Attachments: Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Answer 3 · 2022-03-22T08:54:20.727Z

Jesslyn-2848 answered Mar 22, '22

Hi Karlie

-> We don't have de host itself as a seperate entry in the list:

Is this nessecary? "SELF" is in the list.
What do we have to do do get this in list?

Best Regards

image.png (22.1 KiB)

5 |1600 characters needed characters left characters exceeded

Attachments: Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

question