After installing Hyper-V Integration Services on the next reboot the VM displays BSOD 0x0000007B
Recently, I had some customers with VMs they just P2V'ed, or even had them running already on Virtual Server or Hyper-V. Now, they installed the latest Integration Components that came with the R2 Release.
After the required reboot, the VM shows a Bluescreen 0x0000007B INACCESSIBLE_BOOT_DEVICE
During Debugging I found that the Storage Driver of the ICs require the Windows Driver Framework (WDF), which was not loaded in this case. So the Storage Driver fails to load.
Looking into the Registry of the VM, shows that the WDF Driver was already installed previously, but had the wrong Group relationship, so it is initialized too late.
So here’s how to fix this issue:
1. Boot the VM into LastKnownGood. Press F8 during boot.
2. Open the Registry and drill down to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Wdf01000
3. There is a Group Value that should have the Value WdfLoadGroup. In my cases it was wrongly set to base. Change this to WdfLoadGroup
4. Then remove the Integration Components from Control Panel/Software.
5. Reboot the VM (now without ICs)
6. Install the ICs once again