Use a SAML 2.0 Identity Provider (IdP) for Single Sign On
This document contains information on using a SAML 2.0 compliant SP-Lite profile-based Identity Provider as the preferred Security Token Service (STS) / identity provider. This scenario is useful when you already have a user directory and password store on-premises that can be accessed using SAML 2.0. This existing user directory can be used for sign-on to Office 365 and other Azure AD-secured resources. The SAML 2.0 SP-Lite profile is based on the widely used Security Assertion Markup Language (SAML) federated identity standard to provide a sign-on and attribute exchange framework.
For a list of 3rd party Idps that have been tested for use with Azure AD see the Azure AD federation compatibility list
Microsoft supports this sign-on experience as the integration of a Microsoft cloud service, such as Office 365, with your properly configured SAML 2.0 profile-based IdP. SAML 2.0 identity providers are third-party products and therefore Microsoft does not provide support for the deployment, configuration, troubleshooting best practices regarding them. Once properly configured, the integration with the SAML 2.0 identity provider can be tested for proper configuration by using the Microsoft Connectivity Analyzer Tool, which is described in more detail below. For more information about your SAML 2.0 SP-Lite profile-based identity provider, ask the organization that supplied it.
Only a limited set of clients are available in this sign-on scenario with SAML 2.0 identity providers, this includes:
- Web-based clients such as Outlook Web Access and SharePoint Online
- Email-rich clients that use basic authentication and a supported Exchange access method such as IMAP, POP, Active Sync, MAPI, etc. (the Enhanced Client Protocol end point is required to be deployed), including:
- Microsoft Outlook 2010/Outlook 2013/Outlook 2016, Apple iPhone (various iOS versions)
- Various Google Android Devices
- Windows Phone 7, Windows Phone 7.8, and Windows Phone 8.0
- Windows 8 Mail Client and Windows 8.1 Mail Client
- Windows 10 Mail Client
All other clients are not available in this sign-on scenario with your SAML 2.0 Identity Provider. For example, the Lync 2010 desktop client is not able to sign in to the service with your SAML 2.0 Identity Provider configured for single sign-on.
Azure AD SAML 2.0 protocol requirements
This document contains detailed requirements on the protocol and message formatting that your SAML 2.0 identity provider must implement to federate with Azure AD to enable sign-on to one or more Microsoft cloud services (such as Office 365). The SAML 2.0 relying party (SP-STS) for a Microsoft cloud service used in this scenario is Azure AD.
It is recommended that you ensure your SAML 2.0 identity provider output messages be as similar to the provided sample traces as possible. Also, use specific attribute values from the supplied Azure AD metadata where possible. Once you are happy with your output messages, you can test with the Microsoft Connectivity Analyzer as described below.
The Azure AD metadata can be downloaded from this URL: https://nexus.microsoftonline-p.com/federationmetadata/saml20/federationmetadata.xml. For customers in China using the China-specific instance of Office 365, the following federation endpoint should be used: https://nexus.partner.microsoftonline-p.cn/federationmetadata/saml20/federationmetadata.xml.
SAML protocol requirements
This section details how the request and response message pairs are put together in order to help you to format your messages correctly.
Azure AD can be configured to work with identity providers that use the SAML 2.0 SP Lite profile with some specific requirements as listed below. Using the sample SAML request and response messages along with automated and manual testing, you can work to achieve interoperability with Azure AD.
Signature block requirements
Within the SAML Response message, the Signature node contains information about the digital signature for the message itself. The signature block has the following requirements:
- The assertion node itself must be signed
- The RSA-sha1 algorithm must be used as the DigestMethod. Other digital signature algorithms are not accepted.
- You may also sign the XML document.
- The Transform Algorithm must match the values in the following sample:
<ds:Transform Algorithm="https://www.w3.org/2000/09/xmldsig#enveloped-signature"/> <ds:Transform Algorithm="https://www.w3.org/2001/10/xml-exc-c14n#"/>
- The SignatureMethod Algorithm must match the following sample:
Bindings are the transport-related communications parameters that are required. The following requirements apply to the bindings
- HTTPS is the required transport.
- Azure AD will require HTTP POST for token submission during sign-in.
- Azure AD will use HTTP POST for the authentication request to the identity provider and REDIRECT for the sign out message to the identity provider.
This table shows requirements for specific attributes in the SAML 2.0 message.
|NameID||The value of this assertion must be the same as the Azure AD user’s ImmutableID. It can be up to 64 alpha numeric characters. Any non-html safe characters must be encoded, for example a “+” character is shown as “.2B”.|
|IDPEmail||The User Principal Name (UPN) is listed in the SAML response as an element with the name IDPEmail The user’s UserPrincipalName (UPN) in Azure AD/Office 365. The UPN is in email address format. UPN value in Windows Office 365 (Azure Active Directory).|
|Issuer||Required to be a URI of the identity provider. Do not reuse the Issuer from the sample messages. If you have multiple top-level domains in your Azure AD tenants the Issuer must match the specified URI setting configured per domain.|
Azure AD currently supports the following NameID Format URI for SAML 2.0:urn:oasis:names:tc:SAML:2.0:nameid-format:persistent.
Sample SAML request and response messages
A request and response message pair is shown for the sign-on message exchange. The following is a sample request message that is sent from Azure AD to a sample SAML 2.0 identity provider. The sample SAML 2.0 identity provider is Active Directory Federation Services (AD FS) configured to use SAML-P protocol. Interoperability testing has also been completed with other SAML 2.0 identity providers.
<samlp:AuthnRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol" xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion" ID="_7171b0b2-19f2-4ba2-8f94-24b5e56b7f1e" IssueInstant="2014-01-30T16:18:35Z" Version="2.0" AssertionConsumerServiceIndex="0" > <saml:Issuer>urn:federation:MicrosoftOnline</saml:Issuer> <samlp:NameIDPolicy Format="urn:oasis:names:tc:SAML:2.0:nameid-format:persistent"/> </samlp:AuthnRequest>
The following is a sample response message that is sent from the sample SAML 2.0 compliant identity provider to Azure AD / Office 365.
<samlp:Response ID="_592c022f-e85e-4d23-b55b-9141c95cd2a5" Version="2.0" IssueInstant="2014-01-31T15:36:31.357Z" Destination="https://login.microsoftonline.com/login.srf" Consent="urn:oasis:names:tc:SAML:2.0:consent:unspecified" InResponseTo="_049917a6-1183-42fd-a190-1d2cbaf9b144" xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol"> <Issuer xmlns="urn:oasis:names:tc:SAML:2.0:assertion">http://WS2012R2-0.contoso.com/adfs/services/trust</Issuer> <samlp:Status> <samlp:StatusCode Value="urn:oasis:names:tc:SAML:2.0:status:Success" /> </samlp:Status> <Assertion ID="_7e3c1bcd-f180-4f78-83e1-7680920793aa" IssueInstant="2014-01-31T15:36:31.279Z" Version="2.0" xmlns="urn:oasis:names:tc:SAML:2.0:assertion"> <Issuer>http://WS2012R2-0.contoso.com/adfs/services/trust</Issuer> <ds:Signature xmlns:ds="https://www.w3.org/2000/09/xmldsig#"> <ds:SignedInfo> <ds:CanonicalizationMethod Algorithm="https://www.w3.org/2001/10/xml-exc-c14n#" /> <ds:SignatureMethod Algorithm="https://www.w3.org/2000/09/xmldsig#rsa-sha1" /> <ds:Reference URI="#_7e3c1bcd-f180-4f78-83e1-7680920793aa"> <ds:Transforms> <ds:Transform Algorithm="https://www.w3.org/2000/09/xmldsig#enveloped-signature" /> <ds:Transform Algorithm="https://www.w3.org/2001/10/xml-exc-c14n#" /> </ds:Transforms> <ds:DigestMethod Algorithm="https://www.w3.org/2000/09/xmldsig#sha1" /> <ds:DigestValue>CBn/5YqbheaJP425c0pHva9PhNY=</ds:DigestValue> </ds:Reference> </ds:SignedInfo> <ds:SignatureValue>TciWMyHW2ZODrh/2xrvp5ggmcHBFEd9vrp6DYXp+hZWJzmXMmzwmwS8KNRJKy8H7XqBsdELA1Msqi8I3TmWdnoIRfM/ZAyUppo8suMu6Zw+boE32hoQRnX9EWN/f0vH6zA/YKTzrjca6JQ8gAV1ErwvRWDpyMcwdYCiWALv9ScbkAcebOE1s1JctZ5RBXggdZWrYi72X+I4i6WgyZcIGai/rZ4v2otoWAEHS0y1yh1qT7NDPpl/McDaTGkNU6C+8VfjD78DrUXEcAfKvPgKlKrOMZnD1lCGsViimGY+LSuIdY45MLmyaa5UT4KWph6dA==</ds:SignatureValue> <KeyInfo xmlns="https://www.w3.org/2000/09/xmldsig#"> <ds:X509Data> <ds:X509Certificate>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</ds:X509Certificate> </ds:X509Data> </KeyInfo> </ds:Signature> <Subject> <NameID Format="urn:oasis:names:tc:SAML:2.0:nameid-format:persistent">ABCDEG1234567890</NameID> <SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer"> <SubjectConfirmationData InResponseTo="_049917a6-1183-42fd-a190-1d2cbaf9b144" NotOnOrAfter="2014-01-31T15:41:31.357Z" Recipient="https://login.microsoftonline.com/login.srf" /> </SubjectConfirmation> </Subject> <Conditions NotBefore="2014-01-31T15:36:31.263Z" NotOnOrAfter="2014-01-31T16:36:31.263Z"> <AudienceRestriction> <Audience>urn:federation:MicrosoftOnline</Audience> </AudienceRestriction> </Conditions> <AttributeStatement> <Attribute Name="IDPEmail"> <AttributeValue>firstname.lastname@example.org</AttributeValue> </Attribute> </AttributeStatement> <AuthnStatement AuthnInstant="2014-01-31T15:36:30.200Z" SessionIndex="_7e3c1bcd-f180-4f78-83e1-7680920793aa"> <AuthnContext> <AuthnContextClassRef>urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport</AuthnContextClassRef> </AuthnContext> </AuthnStatement> </Assertion> </samlp:Response>
Configure your SAML 2.0 compliant identity provider
This section contains guidelines on how to configure your SAML 2.0 identity provider to federate with Azure AD to enable single sign-on access to one or more Microsoft cloud services (such as Office 365) using the SAML 2.0 protocol. The SAML 2.0 relying party for a Microsoft cloud service used in this scenario is Azure AD.
Add Azure AD metadata
Your SAML 2.0 identity provider needs to adhere to information about the Azure AD relying party. Azure AD publishes metadata at https://nexus.microsoftonline-p.com/federationmetadata/saml20/federationmetadata.xml.
It is recommended that you always import the latest Azure AD metadata when configuring your SAML 2.0 identity provider.
Azure AD does not read metadata from the identity provider.
Add Azure AD as a relying party
You must enable communication between your SAML 2.0 identity provider and Azure AD. This configuration will be dependent on your specific identity provider and you should refer to documentation for it. You would typically set the relying party ID to the same as the entityID from the Azure AD metadata.
Verify the clock on your SAML 2.0 identity provider server is synchronized to an accurate time source. An inaccurate clock time can cause federated logins to fail.
Install Windows PowerShell for sign-on with SAML 2.0 identity provider
After you have configured your SAML 2.0 identity provider for use with Azure AD sign-on, the next step is to download and install the Azure Active Directory Module for Windows PowerShell. Once installed, you will use these cmdlets to configure your Azure AD domains as federated domains.
The Azure Active Directory Module for Windows PowerShell is a download for managing your organizations data in Azure AD. This module installs a set of cmdlets to Windows PowerShell; you run those cmdlets to set up single sign-on access to Azure AD and in turn to all of the cloud services you are subscribed to. For instructions about how to download and install the cmdlets, see https://technet.microsoft.com/library/jj151815.aspx
Set up a trust between your SAML identity provider and Azure AD
Before configuring federation on an Azure AD domain, it must have a custom domain configured. You cannot federate the default domain that is provided by Microsoft. The default domain from Microsoft ends with “onmicrosoft.com”. You will run a series of cmdlets in the Windows PowerShell command-line interface to add or convert domains for single sign-on.
Each Azure Active Directory domain that you want to federate using your SAML 2.0 identity provider must either be added as a single sign-on domain or converted to be a single sign-on domain from a standard domain. Adding or converting a domain sets up a trust between your SAML 2.0 identity provider and Azure AD.
The following procedure walks you through converting an existing standard domain to a federated domain using SAML 2.0 SP-Lite.
Your domain may experience an outage that impacts users up to 2 hours after you take this step.
Configuring a domain in your Azure AD Directory for federation
Connect to your Azure AD Directory as a tenant administrator:
Configure your desired Office 365 domain to use federation with SAML 2.0:
$dom = "contoso.com" $BrandName - "Sample SAML 2.0 IDP" $LogOnUrl = "https://WS2012R2-0.contoso.com/passiveLogon" $LogOffUrl = "https://WS2012R2-0.contoso.com/passiveLogOff" $ecpUrl = "https://WS2012R2-0.contoso.com/PAOS" $MyURI = "urn:uri:MySamlp2IDP" $MySigningCert = "MIIC7jCCAdagAwIBAgIQRrjsbFPaXIlOG3GTv50fkjANBgkqhkiG9w0BAQsFADAzMTEwLwYDVQQDEyh BREZTIFNpZ25pbmcgLSBXUzIwMTJSMi0wLnN3aW5mb3JtZXIuY29tMB4XDTE0MDEyMDE1MTY0MFoXDT E1MDEyMDE1MTY0MFowMzExMC8GA1UEAxMoQURGUyBTaWduaW5nIC0gV1MyMDEyUjItMC5zd2luZm9yb WVyLmNvbTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBAKe+rLVmXy1QwCwZwqgbbp1/kupQ VcjKuKLitVDbssFyqbDTjP7WRjlVMWAHBI3kgNT7oE362Gf2WMJFf1b0HcrsgLin7daRXpq4Qi6OA57 sW1YFMj3sqyuTP0eZV3S4+ZbDVob6amsZIdIwxaLP9Zfywg2bLsGnVldB0+XKedZwDbCLCVg+3ZWxd9 T/jV0hpLIIWr+LCOHqq8n8beJvlivgLmDJo8f+EITnAxWcsJUvVai/35AhHCUq9tc9sqMp5PWtabAEM b2AU72/QlX/72D2/NbGQq1BWYbqUpgpCZ2nSgvlWDHlCiUo//UGsvfox01kjTFlmqQInsJVfRxF5AcC AwEAATANBgkqhkiG9w0BAQsFAAOCAQEAi8c6C4zaTEc7aQiUgvnGQgCbMZbhUXXLGRpjvFLKaQzkwa9 eq7WLJibcSNyGXBa/SfT5wJgsm3TPKgSehGAOTirhcqHheZyvBObAScY7GOT+u9pVYp6raFrc7ez3c+ CGHeV/tNvy1hJNs12FYH4X+ZCNFIT9tprieR25NCdi5SWUbPZL0tVzJsHc1y92b2M2FxqRDohxQgJvy JOpcg2mSBzZZIkvDg7gfPSUXHVS1MQs0RHSbwq/XdQocUUhl9/e/YWCbNNxlM84BxFsBUok1dH/gzBy Sx+Fc8zYi7cOq9yaBT3RLT6cGmFGVYZJW4FyhPZOCLVNsLlnPQcX3dDg9A==" $uri = "http://WS2012R2-0.contoso.com/adfs/services/trust" $Protocol = "SAMLP" Set-MsolDomainAuthentication ` -DomainName $dom ` -FederationBrandName $BrandName ` -Authentication Federated ` -PassiveLogOnUri $LogOnUrl ` -ActiveLogOnUri $ecpUrl ` -SigningCertificate $MySigningCert ` -IssuerUri $MyURI ` -LogOffUri $LogOffUrl ` -PreferredAuthenticationProtocol $Protocol
You can obtain the signing certificate base64 encoded string from your IDP metadata file. An example of this location has been provided but may differ slightly based on your implementation.
For more information about “Set-MsolDomainAuthentication”, see: https://technet.microsoft.com/library/dn194112.aspx.
You must use
$ecpUrl = "https://WS2012R2-0.contoso.com/PAOS" only if you set up an ECP extension for your identity provider. Exchange Online clients, excluding Outlook Web Application (OWA), rely on a POST based active end point. If your SAML 2.0 STS implements an active end point similar to Shibboleth’s ECP implementation of an active end point it may be possible for these rich clients to interact with the Exchange Online service.
Once federation has been configured you can switch back to “non-federated” (or “managed”), however this change takes up to two hours to complete and it requires assigning new random passwords for cloud-based sign-in to each user. Switching back to “managed” may be required in some scenarios to reset an error in your settings. For more information on Domain conversion see: https://msdn.microsoft.com/library/windowsazure/dn194122.aspx.
Provision user principals to Azure AD / Office 365
Before you can authenticate your users to Office 365, you must provision Azure AD with user principals that correspond to the assertion in the SAML 2.0 claim. If these user principals are not known to Azure AD in advance, then they cannot be used for federated sign-in. Either Azure AD Connect or Windows PowerShell can be used to provision user principals.
Azure AD Connect can be used to provision principals to your domains in your Azure AD Directory from the on-premises Active Directory. For more detailed information, see Integrate your on-premises directories with Azure Active Directory.
Windows PowerShell can also be used to automate adding new users to Azure AD and to synchronize changes from the on-premises directory. To use the Windows PowerShell cmdlets, you must download the Azure Active Directory Modules.
This procedure shows how to add a single user to Azure AD.
Connect to your Azure AD Directory as a tenant administrator: Connect-MsolService.
Create a new user principal:
New-MsolUser ` -UserPrincipalName email@example.com ` -ImmutableId ABCDEFG1234567890 ` -DisplayName "Elwood Folk" ` -FirstName Elwood ` -LastName Folk ` -AlternateEmailAddresses "Elwood.Folk@contoso.com" ` -LicenseAssignment "samlp2test:ENTERPRISEPACK" ` -UsageLocation "US"
For more information about “New-MsolUser” checkout, https://technet.microsoft.com/library/dn194096.aspx
The “UserPrinciplName” value must match the value that you will send for “IDPEmail” in your SAML 2.0 claim and the “ImmutableID” value must match the value sent in your “NameID” assertion.
Verify single sign-on with your SAML 2.0 IDP
As the administrator, before you verify and manage single sign-on (also called identity federation), review the information and perform the steps in the following articles to set up single sign-on with your SAML 2.0 SP-Lite based identity provider:
- You have reviewed the Azure AD SAML 2.0 Protocol Requirements
- You have configured your SAML 2.0 identity provider
- Install Windows PowerShell for single sign-on with SAML 2.0 identity provider
- Set up a trust between SAML 2.0 identity provider and Azure AD
- Provisioned a known test user principal to Azure Active Directory (Office 365) either through Windows PowerShell or Azure AD Connect.
- Configure directory synchronization using Azure AD Connect.
After setting up single sign-on with your SAML 2.0 SP-Lite based identity Provider, you should verify that it is working correctly.
If you converted a domain, rather than adding one, it may take up to 24 hours to set up single sign-on. Before you verify single sign-on, you should finish setting up Active Directory synchronization, synchronize your directories, and activate your synced users.
Use the tool to verify that single sign-on has been set up correctly
To verify that single sign-on has been set up correctly, you can perform the following procedure to confirm that you are able to sign-in to the cloud service with your corporate credentials.
Microsoft has provided a tool that you can use to test your SAML 2.0 based identity provider. Before running the test tool, you must have configured an Azure AD tenant to federate with your identity provider.
The Connectivity Analyzer requires Internet Explorer 10 or later.
- Download the Connectivity Analyzer from, https://testconnectivity.microsoft.com/?tabid=Client.
- Click Install Now to begin downloading and installing the tool.
- Select “I can’t set up federation with Office 365, Azure, or other services that use Azure Active Directory”.
- Once the tool is downloaded and running, you will see the Connectivity Diagnostics window. The tool will step you through testing your federation connection.
- The Connectivity Analyzer will open your SAML 2.0 IDP for you to sign-in, enter the credentials for the user principal you are testing:
- At the Federation test sign-in window, you should enter an account name and password for the Azure AD tenant that is configured to be federated with your SAML 2.0 identity provider. The tool will attempt to sign-in using those credentials and detailed results of tests performed during the sign-in attempt will be provided as output.
- This window shows a failed result of testing. Clicking on Review detailed results will show information about the results for each test that was performed. You can also save the results to disk in order to share them.
The Connectivity analyzer also tests Active Federation using the WS*-based and ECP/PAOS protocols. If you are not using these you can disregard the following error: Testing the Active sign-in flow using your identity provider’s Active federation endpoint.
Manually verify that single sign-on has been set up correctly
Manual verification provides additional steps that you can take to ensure that your SAML 2.0 identity Provider is working properly in many scenarios. To verify that single sign-on has been set up correctly, complete the following steps:
- On a domain-joined computer, sign-in to your cloud service using the same sign-in name that you use for your corporate credentials.
- Click inside the password box. If single sign-on is set up, the password box will be shaded, and you will see the following message: “You are now required to sign-in at <your company>.”
- Click the Sign-in at <your company> link. If you are able to sign-in, then single sign-on has been set up.