Connect computers without internet access by using the Log Analytics gateway in Azure Monitor
As Microsoft Operations Management Suite (OMS) transitions to Microsoft Azure Monitor, terminology is changing. This article refers to OMS Gateway as the Azure Log Analytics gateway.
This article describes how to configure communication with Azure Automation and Azure Monitor by using the Log Analytics gateway when computers that are directly connected or that are monitored by Operations Manager have no internet access.
The Log Analytics gateway is an HTTP forward proxy that supports HTTP tunneling using the HTTP CONNECT command. This gateway sends data to Azure Automation and a Log Analytics workspace in Azure Monitor on behalf of the computers that cannot directly connect to the internet.
The Log Analytics gateway supports:
- Reporting up to the same Log Analytics workspaces configured on each agent behind it and that are configured with Azure Automation Hybrid Runbook Workers.
- Windows computers on which the Microsoft Monitoring Agent is directly connected to a Log Analytics workspace in Azure Monitor.
- Linux computers on which a Log Analytics agent for Linux is directly connected to a Log Analytics workspace in Azure Monitor.
- System Center Operations Manager 2012 SP1 with UR7, Operations Manager 2012 R2 with UR3, or a management group in Operations Manager 2016 or later that is integrated with Log Analytics.
Some IT security policies don't allow internet connection for network computers. These unconnected computers could be point of sale (POS) devices or servers supporting IT services, for example. To connect these devices to Azure Automation or a Log Analytics workspace so you can manage and monitor them, configure them to communicate directly with the Log Analytics gateway. The Log Analytics gateway can receive configuration information and forward data on their behalf. If the computers are configured with the Log Analytics agent to directly connect to a Log Analytics workspace, the computers instead communicate with the Log Analytics gateway.
The Log Analytics gateway transfers data from the agents to the service directly. It doesn't analyze any of the data in transit and the gateway does not cache data when it loses connectivity with the service. When the gateway is unable to communicate with service, the agent continues to run and queues the collected data on the disk of the monitored computer. When the connection is restored, the agent sends the cached data collected to Azure Monitor.
When an Operations Manager management group is integrated with Log Analytics, the management servers can be configured to connect to the Log Analytics gateway to receive configuration information and send collected data, depending on the solution you have enabled. Operations Manager agents send some data to the management server. For example, agents might send Operations Manager alerts, configuration assessment data, instance space data, and capacity data. Other high-volume data, such as Internet Information Services (IIS) logs, performance data, and security events, is sent directly to the Log Analytics gateway.
If one or more Operations Manager Gateway servers are deployed to monitor untrusted systems in a perimeter network or an isolated network, those servers can't communicate with a Log Analytics gateway. Operations Manager Gateway servers can report only to a management server. When an Operations Manager management group is configured to communicate with the Log Analytics gateway, the proxy configuration information is automatically distributed to every agent-managed computer that is configured to collect log data for Azure Monitor, even if the setting is empty.
To provide high availability for directly connected or Operations Management groups that communicate with a Log Analytics workspace through the gateway, use network load balancing (NLB) to redirect and distribute traffic across multiple gateway servers. That way, if one gateway server goes down, the traffic is redirected to another available node.
The computer that runs the Log Analytics gateway requires the Log Analytics Windows agent to identify the service endpoints that the gateway needs to communicate with. The agent also needs to direct the gateway to report to the same workspaces that the agents or Operations Manager management group behind the gateway are configured with. This configuration allows the gateway and the agent to communicate with their assigned workspace.
A gateway can be multihomed to up to four workspaces. This is the total number of workspaces a Windows agent supports.
Each agent must have network connectivity to the gateway so that agents can automatically transfer data to and from the gateway. Avoid installing the gateway on a domain controller.
The following diagram shows data flowing from direct agents, through the gateway, to Azure Automation and Log Analytics. The agent proxy configuration must match the port that the Log Analytics gateway is configured with.
The following diagram shows data flow from an Operations Manager management group to Log Analytics.
Set up your system
Computers designated to run the Log Analytics gateway must have the following configuration:
- Windows 10, Windows 8.1, or Windows 7
- Windows Server 2016, Windows Server 2012 R2, Windows Server 2012, Windows Server 2008 R2, or Windows Server 2008
- Microsoft .NET Framework 4.5
- At least a 4-core processor and 8 GB of memory
- A Log Analytics agent for Windows that is configured to report to the same workspace as the agents that communicate through the gateway
The Log Analytics gateway is available in these languages:
- Chinese (Simplified)
- Chinese (Traditional)
- Portuguese (Brazil)
- Portuguese (Portugal)
- Spanish (International)
Supported encryption protocols
The Log Analytics gateway supports only Transport Layer Security (TLS) 1.0, 1.1, and 1.2. It doesn't support Secure Sockets Layer (SSL). To ensure the security of data in transit to Log Analytics, configure the gateway to use at least TLS 1.2. Older versions of TLS or SSL are vulnerable. Although they currently allow backward compatibility, avoid using them.
For additional information, review Sending data securely using TLS 1.2.
Supported number of agent connections
The following table shows approximately how many agents can communicate with a gateway server. Support is based on agents that upload about 200 KB of data every 6 seconds. For each agent tested, data volume is about 2.7 GB per day.
|Gateway||Agents supported (approximate)|
|CPU: Intel Xeon Processor E5-2660 v3 @ 2.6 GHz 2 Cores
Memory: 4 GB
Network bandwidth: 1 Gbps
|CPU: Intel Xeon Processor E5-2660 v3 @ 2.6 GHz 4 Cores
Memory: 8 GB
Network bandwidth: 1 Gbps
Download the Log Analytics gateway
Get the latest version of the Log Analytics gateway Setup file from either Microsoft Download Center or the Azure portal.
To get the Log Analytics gateway from the Azure portal, follow these steps:
Browse the list of services, and then select Log Analytics.
Select a workspace.
In your workspace blade, under General, select Quick Start.
Under Choose a data source to connect to the workspace, select Computers.
In the Direct Agent blade, select Download Log Analytics gateway.
- In your workspace blade, under Settings, select Advanced settings.
- Go to Connected Sources > Windows Servers and select Download Log Analytics gateway.
Install Log Analytics gateway using setup wizard
To install a gateway using the setup wizard, follow these steps.
From the destination folder, double-click Log Analytics gateway.msi.
On the Welcome page, select Next.
On the License Agreement page, select I accept the terms in the License Agreement to agree to the Microsoft Software License Terms, and then select Next.
On the Port and proxy address page:
a. Enter the TCP port number to be used for the gateway. Setup uses this port number to configure an inbound rule on Windows Firewall. The default value is 8080. The valid range of the port number is 1 through 65535. If the input does not fall into this range, an error message appears.
b. If the server where the gateway is installed needs to communicate through a proxy, enter the proxy address where the gateway needs to connect. For example, enter
http://myorgname.corp.contoso.com:80. If you leave this field blank, the gateway will try to connect to the internet directly. If your proxy server requires authentication, enter a username and password.
c. Select Next.
If you do not have Microsoft Update enabled, the Microsoft Update page appears, and you can choose to enable it. Make a selection and then select Next. Otherwise, continue to the next step.
On the Destination Folder page, either leave the default folder C:\Program Files\OMS Gateway or enter the location where you want to install the gateway. Then select Next.
On the Ready to install page, select Install. If User Account Control requests permission to install, select Yes.
After Setup finishes, select Finish. To verify that the service is running, open the services.msc snap-in and verify that OMS Gateway appears in the list of services and that its status is Running.
Install the Log Analytics gateway using the command line
The downloaded file for the gateway is a Windows Installer package that supports silent installation from the command line or other automated method. If you are not familiar with the standard command-line options for Windows Installer, see Command-line options.
The following table highlights the parameters supported by setup.
|PORTNUMBER||TCP port number for gateway to listen on|
|PROXY||IP address of proxy server|
|INSTALLDIR||Fully qualified path to specify install directory of gateway software files|
|USERNAME||User Id to authenticate with proxy server|
|PASSWORD||Password of the user Id to authenticate with proxy|
|LicenseAccepted||Specify a value of 1 to verify you accept license agreement|
|HASAUTH||Specify a value of 1 when USERNAME/PASSWORD parameters are specified|
|HASPROXY||Specify a value of 1 when specifying IP address for PROXY parameter|
To silently install the gateway and configure it with a specific proxy address, port number, type the following:
Msiexec.exe /I "oms gateway.msi" /qn PORTNUMBER=8080 PROXY="10.80.2.200" HASPROXY=1 LicenseAccepted=1
Using the /qn command-line option hides setup, /qb shows setup during silent install.
If you need to provide credentials to authenticate with the proxy, type the following:
Msiexec.exe /I "oms gateway.msi" /qn PORTNUMBER=8080 PROXY="10.80.2.200" HASPROXY=1 HASAUTH=1 USERNAME="<username>" PASSWORD="<password>" LicenseAccepted=1
After installation, you can confirm the settings are accepted (exlcuding the username and password) using the following PowerShell cmdlets:
- Get-OMSGatewayConfig – Returns the TCP Port the gateway is configured to listen on.
- Get-OMSGatewayRelayProxy – Returns the IP address of the proxy server you configured it to communicate with.
Configure network load balancing
You can configure the gateway for high availability using network load balancing (NLB) using either Microsoft Network Load Balancing (NLB), Azure Load Balancer, or hardware-based load balancers. The load balancer manages traffic by redirecting the requested connections from the Log Analytics agents or Operations Manager management servers across its nodes. If one Gateway server goes down, the traffic gets redirected to other nodes.
Microsoft Network Load Balancing
To learn how to design and deploy a Windows Server 2016 network load balancing cluster, see Network load balancing. The following steps describe how to configure a Microsoft network load balancing cluster.
Sign onto the Windows server that is a member of the NLB cluster with an administrative account.
Open Network Load Balancing Manager in Server Manager, click Tools, and then click Network Load Balancing Manager.
To connect an Log Analytics gateway server with the Microsoft Monitoring Agent installed, right-click the cluster's IP address, and then click Add Host to Cluster.
Enter the IP address of the gateway server that you want to connect.
Azure Load Balancer
To learn how to design and deploy an Azure Load Balancer, see What is Azure Load Balancer?. To deploy a basic load balancer, follow the steps outlined in this quickstart excluding the steps outlined in the section Create back-end servers.
Configuring the Azure Load Balancer using the Basic SKU, requires that Azure virtual machines belong to an Availability Set. To learn more about availability sets, see Manage the availability of Windows virtual machines in Azure. To add existing virtual machines to an availability set, refer to Set Azure Resource Manager VM Availability Set.
After the load balancer is created, a backend pool needs to be created, which distributes traffic to one or more gateway servers. Follow the steps described in the quickstart article section Create resources for the load balancer.
When configuring the health probe it should be configured to use the TCP port of the gateway server. The health probe dynamically adds or removes the gateway servers from the load balancer rotation based on their response to health checks.
Configure the Log Analytics agent and Operations Manager management group
In this section, you'll see how to configure directly connected Log Analytics agents, an Operations Manager management group, or Azure Automation Hybrid Runbook Workers with the Log Analytics gateway to communicate with Azure Automation or Log Analytics.
Configure a standalone Log Analytics agent
When configuring the Log Analytics agent, replace the proxy server value with the IP address of the Log Analytics gateway server and its port number. If you have deployed multiple gateway servers behind a load balancer, the Log Analytics agent proxy configuration is the virtual IP address of the load balancer.
To install the Log Analytics agent on the gateway and Windows computers that directly connect to Log Analytics, see Connect Windows computers to the Log Analytics service in Azure. To connect Linux computers, see Configure a Log Analytics agent for Linux computers in a hybrid environment.
After you install the agent on the gateway server, configure it to report to the workspace or workspace agents that communicate with the gateway. If the Log Analytics Windows agent is not installed on the gateway, event 300 is written to the OMS Gateway event log, indicating that the agent needs to be installed. If the agent is installed but not configured to report to the same workspace as the agents that communicate through it, event 105 is written to the same log, indicating that the agent on the gateway needs to be configured to report to the same workspace as the agents that communicate with the gateway.
After you complete configuration, restart the OMS Gateway service to apply the changes. Otherwise, the gateway will reject agents that attempt to communicate with Log Analytics and will report event 105 in the OMS Gateway event log. This will also happen when you add or remove a workspace from the agent configuration on the gateway server.
For information related to the Automation Hybrid Runbook Worker, see Automate resources in your datacenter or cloud by using Hybrid Runbook Worker.
Configure Operations Manager, where all agents use the same proxy server
The Operations Manager proxy configuration is automatically applied to all agents that report to Operations Manager, even if the setting is empty.
To use OMS Gateway to support Operations Manager, you must have:
- Microsoft Monitoring Agent (version 8.0.10900.0 or later) installed on the OMS Gateway server and configured with the same Log Analytics workspaces that your management group is configured to report to.
- Internet connectivity. Alternatively, OMS Gateway must be connected to a proxy server that is connected to the internet.
If you specify no value for the gateway, blank values are pushed to all agents.
If your Operations Manager management group is registering with a Log Analytics workspace for the first time, you won't see the option to specify the proxy configuration for the management group in the Operations console. This option is available only if the management group has been registered with the service.
To configure integration, update the system proxy configuration by using Netsh on the system where you're running the Operations console and on all management servers in the management group. Follow these steps:
Open an elevated command prompt:
a. Select Start and enter cmd.
b. Right-click Command Prompt and select Run as administrator.
Enter the following command:
netsh winhttp set proxy <proxy>:<port>
After completing the integration with Log Analytics, remove the change by running
netsh winhttp reset proxy. Then, in the Operations console, use the Configure proxy server option to specify the Log Analytics gateway server.
On the Operations Manager console, under Operations Management Suite, select Connection, and then select Configure Proxy Server.
Select Use a proxy server to access the Operations Management Suite and then enter the IP address of the Log Analytics gateway server or virtual IP address of the load balancer. Be careful to start with the prefix
Select Finish. Your Operations Manager management group is now configured to communicate through the gateway server to the Log Analytics service.
Configure Operations Manager, where specific agents use a proxy server
For large or complex environments, you might want only specific servers (or groups) to use the Log Analytics gateway server. For these servers, you can't update the Operations Manager agent directly because this value is overwritten by the global value for the management group. Instead, override the rule used to push these values.
Use this configuration technique if you want to allow for multiple Log Analytics gateway servers in your environment. For example, you can require specific Log Analytics gateway servers to be specified on a regional basis.
To configure specific servers or groups to use the Log Analytics gateway server:
Open the Operations Manager console and select the Authoring workspace.
In the Authoring workspace, select Rules.
On the Operations Manager toolbar, select the Scope button. If this button is not available, make sure you have selected an object, not a folder, in the Monitoring pane. The Scope Management Pack Objects dialog box displays a list of common targeted classes, groups, or objects.
In the Look for field, enter Health Service and select it from the list. Select OK.
Search for Advisor Proxy Setting Rule.
On the Operations Manager toolbar, select Overrides and then point to Override the Rule\For a specific object of class: Health Service and select an object from the list. Or create a custom group that contains the health service object of the servers you want to apply this override to. Then apply the override to your custom group.
In the Override Properties dialog box, add a check mark in the Override column next to the WebProxyAddress parameter. In the Override Value field, enter the URL of the Log Analytics gateway server. Be careful to start with the prefix
You don't need to enable the rule. It's already managed automatically with an override in the Microsoft System Center Advisor Secure Reference Override management pack that targets the Microsoft System Center Advisor Monitoring Server Group.
Select a management pack from the Select destination management pack list, or create a new unsealed management pack by selecting New.
When you finish, select OK.
Configure for Automation Hybrid Runbook Workers
If you have Automation Hybrid Runbook Workers in your environment, follow these steps to configure the gateway to support the workers.
Refer to the Configure your network section of the Automation documentation to find the URL for each region.
If your computer is registered as a Hybrid Runbook Worker automatically, for example if the Update Management solution is enabled for one or more VMs, follow these steps:
- Add the Job Runtime Data service URLs to the Allowed Host list on the Log Analytics gateway. For example:
- Restart the Log Analytics gateway service by using the following PowerShell cmdlet:
If your computer is joined to Azure Automation by using the Hybrid Runbook Worker registration cmdlet, follow these steps:
- Add the agent service registration URL to the Allowed Host list on the Log Analytics gateway. For example:
- Add the Job Runtime Data service URLs to the Allowed Host list on the Log Analytics gateway. For example:
- Restart the Log Analytics gateway service.
Useful PowerShell cmdlets
You can use cmdlets to complete the tasks to update the Log Analytics gateway's configuration settings. Before you use cmdlets, be sure to:
- Install the Log Analytics gateway (Microsoft Windows Installer).
- Open a PowerShell console window.
- Import the module by typing this command:
- If no error occurred in the previous step, the module was successfully imported and the cmdlets can be used. Enter
- After you use the cmdlets to make changes, restart the OMS Gateway service.
An error in step 3 means that the module wasn't imported. The error might occur when PowerShell can't find the module. You can find the module in the OMS Gateway installation path: C:\Program Files\Microsoft OMS Gateway\PowerShell\OmsGateway.
||Key||Gets the configuration of the service||
|Changes the configuration of the service||
||Gets the address of relay (upstream) proxy||
|Sets the address (and credential) of relay (upstream) proxy||1. Set a relay proxy and credential:
2. Set a relay proxy that doesn't need authentication:
3. Clear the relay proxy setting:
||Gets the currently allowed host (only the locally configured allowed host, not automatically downloaded allowed hosts)||
||Host (required)||Adds the host to the allowed list||
||Host (required)||Removes the host from the allowed list||
||Subject (required)||Adds the client certificate subject to the allowed list||
||Subject (required)||Removes the client certificate subject from the allowed list||
||Gets the currently allowed client certificate subjects (only the locally configured allowed subjects, not automatically downloaded allowed subjects)||
To collect events logged by the gateway, you should have the Log Analytics agent installed.
Log Analytics gateway event IDs and descriptions
The following table shows the event IDs and descriptions for Log Analytics gateway log events.
|400||Any application error that has no specific ID.|
|401||Wrong configuration. For example, listenPort = "text" instead of an integer.|
|402||Exception in parsing TLS handshake messages.|
|403||Networking error. For example, cannot connect to target server.|
|101||Service has started.|
|102||Service has stopped.|
|103||An HTTP CONNECT command was received from client.|
|104||Not an HTTP CONNECT command.|
|105||Destination server is not in allowed list, or destination port is not secure (443).
Ensure that the MMA agent on your OMS Gateway server and the agents that communicate with OMS Gateway are connected to the same Log Analytics workspace.
|105||ERROR TcpConnection – Invalid Client certificate: CN=Gateway.
Ensure that you're using OMS Gateway version 1.0.395.0 or greater. Also ensure that the MMA agent on your OMS Gateway server and the agents communicating with OMS Gateway are connected to the same Log Analytics workspace.
|106||Unsupported TLS/SSL protocol version.
The Log Analytics gateway supports only TLS 1.0, TLS 1.1, and 1.2. It does not support SSL.
|107||The TLS session has been verified.|
Performance counters to collect
The following table shows the performance counters available for the Log Analytics gateway. Use Performance Monitor to add the counters.
|Log Analytics Gateway/Active Client Connection||Number of active client network (TCP) connections|
|Log Analytics Gateway/Error Count||Number of errors|
|Log Analytics Gateway/Connected Client||Number of connected clients|
|Log Analytics Gateway/Rejection Count||Number of rejections due to any TLS validation error|
When you're signed in to the Azure portal, you can get help with the Log Analytics gateway or any other Azure service or feature. To get help, select the question mark icon in the upper-right corner of the portal and select New support request. Then complete the new support request form.
Add data sources to collect data from connected sources, and store the data in your Log Analytics workspace.