Azure Monitor PowerShell quick start samples
This article shows you sample PowerShell commands to help you access Azure Monitor features.
Azure Monitor is the new name for what was called "Azure Insights" until Sept 25th, 2016. However, the namespaces and thus the following commands still contain the word "insights."
This article has been updated to use the new Azure PowerShell Az module. You can still use the AzureRM module, which will continue to receive bug fixes until at least December 2020. To learn more about the new Az module and AzureRM compatibility, see Introducing the new Azure PowerShell Az module. For Az module installation instructions, see Install Azure PowerShell.
Set up PowerShell
If you haven't already, set up PowerShell to run on your computer. For more information, see How to Install and Configure PowerShell.
Examples in this article
The examples in the article illustrate how you can use Azure Monitor cmdlets. You can also review the entire list of Azure Monitor PowerShell cmdlets at Azure Monitor (Insights) Cmdlets.
Sign in and use subscriptions
First, log in to your Azure subscription.
You'll see a sign in screen. Once you sign in your Account, TenantID, and default Subscription ID are displayed. All the Azure cmdlets work in the context of your default subscription. To view the list of subscriptions you have access to, use the following command:
To see your working context (which subscription your commands are run against), use the following command:
To change your working context to a different subscription, use the following command:
Set-AzContext -SubscriptionId <subscriptionid>
Retrieve Activity log for a subscription
Use the Get-AzLog cmdlet. The following are some common examples. The Activity Log holds the last 90 days of operations. Using dates before this time results in an error message.
See what the current date/time are to verify what times to use in the commands below:
Get log entries from this time/date to present:
Get-AzLog -StartTime 2019-03-01T10:30
Get log entries between a time/date range:
Get-AzLog -StartTime 2019-01-01T10:30 -EndTime 2015-01-01T11:30
Get log entries from a specific resource group:
Get-AzLog -ResourceGroup 'myrg1'
Get log entries from a specific resource provider between a time/date range:
Get-AzLog -ResourceProvider 'Microsoft.Web' -StartTime 2015-01-01T10:30 -EndTime 2015-01-01T11:30
Get all log entries with a specific caller:
Get-AzLog -Caller 'firstname.lastname@example.org'
The following command retrieves the last 1000 events from the activity log:
Get-AzLog -MaxRecord 10
Get-AzLog supports many other parameters. See the
Get-AzLog reference for more information.
Get-AzLog only provides 15 days of history. Using the -MaxRecords parameter allows you to query the last N events, beyond 15 days. To access events older than 15 days, use the REST API or SDK (C# sample using the SDK). If you do not include StartTime, then the default value is EndTime minus one hour. If you do not include EndTime, then the default value is current time. All times are in UTC.
Retrieve alerts history
To view all alert events, you can query the Azure Resource Manager logs using the following examples.
Get-AzLog -Caller "Microsoft.Insights/alertRules" -DetailedOutput -StartTime 2015-03-01
To view the history for a specific alert rule, you can use the
Get-AzAlertHistory cmdlet, passing in the resource ID of the alert rule.
Get-AzAlertHistory -ResourceId /subscriptions/s1/resourceGroups/rg1/providers/microsoft.insights/alertrules/myalert -StartTime 2016-03-1 -Status Activated
Get-AzAlertHistory cmdlet supports various parameters. More information, see Get-AlertHistory.
Retrieve information on alert rules
All of the following commands act on a Resource Group named "montest".
View all the properties of the alert rule:
Get-AzAlertRule -Name simpletestCPU -ResourceGroup montest -DetailedOutput
Retrieve all alerts on a resource group:
Get-AzAlertRule -ResourceGroup montest
Retrieve all alert rules set for a target resource. For example, all alert rules set on a VM.
Get-AzAlertRule -ResourceGroup montest -TargetResourceId /subscriptions/s1/resourceGroups/montest/providers/Microsoft.Compute/virtualMachines/testconfig
Get-AzAlertRule supports other parameters. See Get-AlertRule for more information.
Create metric alerts
You can use the
Add-AlertRule cmdlet to create, update, or disable an alert rule.
You can create email and webhook properties using
New-AzAlertRuleWebhook, respectively. In the Alert rule cmdlet, assign these properties as actions to the Actions property of the Alert Rule.
The following table describes the parameters and values used to create an alert using a metric.
|Location of this alert rule||East US|
|MetricName of the alert that is created||\PhysicalDisk(_Total)\Disk Writes/sec. See the
|Threshold value (count/sec in for this metric)||1|
|WindowSize (hh:mm:ss format)||00:05:00|
|aggregator (statistic of the metric, which uses Average count, in this case)||Average|
|custom emails (string array)||'email@example.com','firstname.lastname@example.org'|
|send email to owners, contributors and readers||-SendToServiceOwners|
Create an Email action
$actionEmail = New-AzAlertRuleEmail -CustomEmail email@example.com
Create a Webhook action
$actionWebhook = New-AzAlertRuleWebhook -ServiceUri https://example.com?token=mytoken
Create the alert rule on the CPU% metric on a classic VM
Add-AzMetricAlertRule -Name vmcpu_gt_1 -Location "East US" -ResourceGroup myrg1 -TargetResourceId /subscriptions/s1/resourceGroups/myrg1/providers/Microsoft.ClassicCompute/virtualMachines/my_vm1 -MetricName "Percentage CPU" -Operator GreaterThan -Threshold 1 -WindowSize 00:05:00 -TimeAggregationOperator Average -Action $actionEmail, $actionWebhook -Description "alert on CPU > 1%"
Retrieve the alert rule
Get-AzAlertRule -Name vmcpu_gt_1 -ResourceGroup myrg1 -DetailedOutput
The Add alert cmdlet also updates the rule if an alert rule already exists for the given properties. To disable an alert rule, include the parameter -DisableRule.
Get a list of available metrics for alerts
You can use the
Get-AzMetricDefinition cmdlet to view the list of all metrics for a specific resource.
Get-AzMetricDefinition -ResourceId <resource_id>
The following example generates a table with the metric Name and the Unit for it.
Get-AzMetricDefinition -ResourceId <resource_id> | Format-Table -Property Name,Unit
A full list of available options for
Get-AzMetricDefinition is available at Get-MetricDefinitions.
Create and manage Activity Log alerts
You can use the
Set-AzActivityLogAlert cmdlet to set an Activity Log alert. An Activity Log alert requires that you first define your conditions as a dictionary of conditions, then create an alert that uses those conditions.
$condition1 = New-AzActivityLogAlertCondition -Field 'category' -Equal 'Administrative' $condition2 = New-AzActivityLogAlertCondition -Field 'operationName' -Equal 'Microsoft.Compute/virtualMachines/write' $additionalWebhookProperties = New-Object "System.Collections.Generic.Dictionary``2[System.String,System.String]" $additionalWebhookProperties.Add('customProperty', 'someValue') $actionGrp1 = New-AzActionGroup -ActionGroupId '/subscriptions/<subid>/providers/Microsoft.Insights/actiongr1' -WebhookProperty $additionalWebhookProperties Set-AzActivityLogAlert -Location 'Global' -Name 'alert on VM create' -ResourceGroupName 'myResourceGroup' -Scope '/subscriptions/<subid>' -Action $actionGrp1 -Condition $condition1, $condition2
The additional webhook properties are optional. You can get back the contents of an Activity Log Alert using
Create and manage AutoScale settings
A resource (a Web app, VM, Cloud Service, or Virtual Machine Scale Set) can have only one autoscale setting configured for it. However, each autoscale setting can have multiple profiles. For example, one for a performance-based scale profile and a second one for a schedule-based profile. Each profile can have multiple rules configured on it. For more information about Autoscale, see How to Autoscale an Application.
Here are the steps to use:
- Create rule(s).
- Create profile(s) mapping the rules that you created previously to the profiles.
- Optional: Create notifications for autoscale by configuring webhook and email properties.
- Create an autoscale setting with a name on the target resource by mapping the profiles and notifications that you created in the previous steps.
The following examples show you how you can create an Autoscale setting for a Virtual Machine Scale Set for a Windows operating system based by using the CPU utilization metric.
First, create a rule to scale out, with an instance count increase.
$rule1 = New-AzAutoscaleRule -MetricName "Percentage CPU" -MetricResourceId /subscriptions/s1/resourceGroups/big2/providers/Microsoft.Compute/virtualMachineScaleSets/big2 -Operator GreaterThan -MetricStatistic Average -Threshold 60 -TimeGrain 00:01:00 -TimeWindow 00:10:00 -ScaleActionCooldown 00:10:00 -ScaleActionDirection Increase -ScaleActionValue 1
Next, create a rule to scale in, with an instance count decrease.
$rule2 = New-AzAutoscaleRule -MetricName "Percentage CPU" -MetricResourceId /subscriptions/s1/resourceGroups/big2/providers/Microsoft.Compute/virtualMachineScaleSets/big2 -Operator GreaterThan -MetricStatistic Average -Threshold 30 -TimeGrain 00:01:00 -TimeWindow 00:10:00 -ScaleActionCooldown 00:10:00 -ScaleActionDirection Decrease -ScaleActionValue 1
Then, create a profile for the rules.
$profile1 = New-AzAutoscaleProfile -DefaultCapacity 2 -MaximumCapacity 10 -MinimumCapacity 2 -Rules $rule1,$rule2 -Name "My_Profile"
Create a webhook property.
$webhook_scale = New-AzAutoscaleWebhook -ServiceUri "https://example.com?mytoken=mytokenvalue"
Create the notification property for the autoscale setting, including email and the webhook that you created previously.
$notification1= New-AzAutoscaleNotification -CustomEmails firstname.lastname@example.org -SendEmailToSubscriptionAdministrators SendEmailToSubscriptionCoAdministrators -Webhooks $webhook_scale
Finally, create the autoscale setting to add the profile that you created previously.
Add-AzAutoscaleSetting -Location "East US" -Name "MyScaleVMSSSetting" -ResourceGroup big2 -TargetResourceId /subscriptions/s1/resourceGroups/big2/providers/Microsoft.Compute/virtualMachineScaleSets/big2 -AutoscaleProfiles $profile1 -Notifications $notification1
For more information about managing Autoscale settings, see Get-AutoscaleSetting.
The following example shows you how you can view recent autoscale and alert events. Use the activity log search to view the autoscale history.
Get-AzLog -Caller "Microsoft.Insights/autoscaleSettings" -DetailedOutput -StartTime 2015-03-01
You can use the
Get-AzAutoScaleHistory cmdlet to retrieve AutoScale history.
Get-AzAutoScaleHistory -ResourceId /subscriptions/s1/resourceGroups/myrg1/providers/microsoft.insights/autoscalesettings/myScaleSetting -StartTime 2016-03-15 -DetailedOutput
For more information, see Get-AutoscaleHistory.
View details for an autoscale setting
You can use the
Get-Autoscalesetting cmdlet to retrieve more information about the autoscale setting.
The following example shows details about all autoscale settings in the resource group 'myrg1'.
Get-AzAutoscalesetting -ResourceGroup myrg1 -DetailedOutput
The following example shows details about all autoscale settings in the resource group 'myrg1' and specifically the autoscale setting named 'MyScaleVMSSSetting'.
Get-AzAutoscalesetting -ResourceGroup myrg1 -Name MyScaleVMSSSetting -DetailedOutput
Remove an autoscale setting
You can use the
Remove-Autoscalesetting cmdlet to delete an autoscale setting.
Remove-AzAutoscalesetting -ResourceGroup myrg1 -Name MyScaleVMSSSetting
Manage log profiles for activity log
You can create a log profile and export data from your activity log to a storage account and you can configure data retention for it. Optionally, you can also stream the data to your Event Hub. This feature is currently in Preview and you can only create one log profile per subscription. You can use the following cmdlets with your current subscription to create and manage log profiles. You can also choose a particular subscription. Although PowerShell defaults to the current subscription, you can always change that using
Set-AzContext. You can configure activity log to route data to any storage account or Event Hub within that subscription. Data is written as blob files in JSON format.
Get a log profile
To fetch your existing log profiles, use the
Add a log profile without data retention
Add-AzLogProfile -Name my_log_profile_s1 -StorageAccountId /subscriptions/s1/resourceGroups/myrg1/providers/Microsoft.Storage/storageAccounts/my_storage -Locations global,westus,eastus,northeurope,westeurope,eastasia,southeastasia,japaneast,japanwest,northcentralus,southcentralus,eastus2,centralus,australiaeast,australiasoutheast,brazilsouth,centralindia,southindia,westindia
Remove a log profile
Remove-AzLogProfile -name my_log_profile_s1
Add a log profile with data retention
You can specify the -RetentionInDays property with the number of days, as a positive integer, where the data is retained.
Add-AzLogProfile -Name my_log_profile_s1 -StorageAccountId /subscriptions/s1/resourceGroups/myrg1/providers/Microsoft.Storage/storageAccounts/my_storage -Locations global,westus,eastus,northeurope,westeurope,eastasia,southeastasia,japaneast,japanwest,northcentralus,southcentralus,eastus2,centralus,australiaeast,australiasoutheast,brazilsouth,centralindia,southindia,westindia -RetentionInDays 90
Add log profile with retention and EventHub
In addition to routing your data to storage account, you can also stream it to an Event Hub. In this preview release the storage account configuration is mandatory but Event Hub configuration is optional.
Add-AzLogProfile -Name my_log_profile_s1 -StorageAccountId /subscriptions/s1/resourceGroups/myrg1/providers/Microsoft.Storage/storageAccounts/my_storage -serviceBusRuleId /subscriptions/s1/resourceGroups/Default-ServiceBus-EastUS/providers/Microsoft.ServiceBus/namespaces/mytestSB/authorizationrules/RootManageSharedAccessKey -Locations global,westus,eastus,northeurope,westeurope,eastasia,southeastasia,japaneast,japanwest,northcentralus,southcentralus,eastus2,centralus,australiaeast,australiasoutheast,brazilsouth,centralindia,southindia,westindia -RetentionInDays 90
Configure diagnostics logs
Many Azure services provide additional logs and telemetry that can do one or more of the following:
- be configured to save data in your Azure Storage account
- sent to Event Hubs
- sent to a Log Analytics workspace.
The operation can only be performed at a resource level. The storage account or event hub should be present in the same region as the target resource where the diagnostics setting is configured.
Get diagnostic setting
Get-AzDiagnosticSetting -ResourceId /subscriptions/s1/resourceGroups/myrg1/providers/Microsoft.Logic/workflows/andy0315logicapp
Disable diagnostic setting
Set-AzDiagnosticSetting -ResourceId /subscriptions/s1/resourceGroups/myrg1/providers/Microsoft.Logic/workflows/andy0315logicapp -StorageAccountId /subscriptions/s1/resourceGroups/Default-Storage-WestUS/providers/Microsoft.Storage/storageAccounts/mystorageaccount -Enable $false
Enable diagnostic setting without retention
Set-AzDiagnosticSetting -ResourceId /subscriptions/s1/resourceGroups/myrg1/providers/Microsoft.Logic/workflows/andy0315logicapp -StorageAccountId /subscriptions/s1/resourceGroups/Default-Storage-WestUS/providers/Microsoft.Storage/storageAccounts/mystorageaccount -Enable $true
Enable diagnostic setting with retention
Set-AzDiagnosticSetting -ResourceId /subscriptions/s1/resourceGroups/myrg1/providers/Microsoft.Logic/workflows/andy0315logicapp -StorageAccountId /subscriptions/s1/resourceGroups/Default-Storage-WestUS/providers/Microsoft.Storage/storageAccounts/mystorageaccount -Enable $true -RetentionEnabled $true -RetentionInDays 90
Enable diagnostic setting with retention for a specific log category
Set-AzDiagnosticSetting -ResourceId /subscriptions/s1/resourceGroups/insights-integration/providers/Microsoft.Network/networkSecurityGroups/viruela1 -StorageAccountId /subscriptions/s1/resourceGroups/myrg1/providers/Microsoft.Storage/storageAccounts/sakteststorage -Categories NetworkSecurityGroupEvent -Enable $true -RetentionEnabled $true -RetentionInDays 90
Enable diagnostic setting for Event Hubs
Set-AzDiagnosticSetting -ResourceId /subscriptions/s1/resourceGroups/insights-integration/providers/Microsoft.Network/networkSecurityGroups/viruela1 -serviceBusRuleId /subscriptions/s1/resourceGroups/Default-ServiceBus-EastUS/providers/Microsoft.ServiceBus/namespaces/mytestSB/authorizationrules/RootManageSharedAccessKey -Enable $true
Enable diagnostic setting for Log Analytics
Set-AzDiagnosticSetting -ResourceId /subscriptions/s1/resourceGroups/insights-integration/providers/Microsoft.Network/networkSecurityGroups/viruela1 -WorkspaceId /subscriptions/s1/resourceGroups/insights-integration/providers/providers/microsoft.operationalinsights/workspaces/myWorkspace -Enabled $true
Note that the WorkspaceId property takes the resource ID of the workspace. You can obtain the resource ID of your Log Analytics workspace using the following command:
These commands can be combined to send data to multiple destinations.