Create a Windows VM with accelerated networking using Azure PowerShell
In this tutorial, you learn how to create a Windows virtual machine (VM) with accelerated networking.
To use accelerated networking with a Linux virtual machine, see Create a Linux VM with accelerated networking.
Accelerated networking enables single root I/O virtualization (SR-IOV) to a VM, greatly improving its networking performance. This high-performance path bypasses the host from the data path, which reduces latency, jitter, and CPU utilization for the most demanding network workloads on supported VM types. The following diagram illustrates how two VMs communicate with and without accelerated networking:
Without accelerated networking, all networking traffic in and out of the VM must traverse the host and the virtual switch. The virtual switch provides all policy enforcement, such as network security groups, access control lists, isolation, and other network virtualized services to network traffic.
To learn more about virtual switches, see Hyper-V Virtual Switch.
With accelerated networking, network traffic arrives at the VM's network interface (NIC) and is then forwarded to the VM. All network policies that the virtual switch applies are now offloaded and applied in hardware. Because policy is applied in hardware, the NIC can forward network traffic directly to the VM. The NIC bypasses the host and the virtual switch, while it maintains all the policy it applied in the host.
The benefits of accelerated networking only apply to the VM that it's enabled on. For the best results, enable this feature on at least two VMs connected to the same Azure virtual network. When communicating across virtual networks or connecting on-premises, this feature has minimal impact to overall latency.
Lower Latency / Higher packets per second (pps): Eliminating the virtual switch from the data path removes the time packets spend in the host for policy processing. It also increases the number of packets that can be processed inside the VM.
Reduced jitter: Virtual switch processing depends on the amount of policy that needs to be applied. It also depends on the workload of the CPU that's doing the processing. Offloading the policy enforcement to the hardware removes that variability by delivering packets directly to the VM. Offloading also removes the host-to-VM communication, all software interrupts, and all context switches.
Decreased CPU utilization: Bypassing the virtual switch in the host leads to less CPU utilization for processing network traffic.
Supported operating systems
The following versions of Windows are supported:
- Windows Server 2019 Standard/Datacenter
- Windows Server 2016 Standard/Datacenter
- Windows Server 2012 R2 Standard/Datacenter
Limitations and constraints
Supported VM instances
Accelerated Networking is supported on most general purpose and compute-optimized instance sizes with 2 or more vCPUs. On instances that support hyperthreading, Accelerated Networking is supported on VM instances with 4 or more vCPUs.
Support for Accelerated Networking can be found in the individual virtual machine sizes documentation.
If you're using a custom image and your image supports Accelerated Networking, be sure that you have the required drivers that work with Mellanox ConnectX-3 and ConnectX-4 Lx NICs on Azure.
Accelerated networking is available in all global Azure regions and Azure Government Cloud.
Enabling accelerated networking on a running VM
A supported VM size without accelerated networking enabled can only have the feature enabled when it's stopped and deallocated.
Deployment through Azure Resource Manager
Virtual machines (classic) can't be deployed with accelerated networking.
VM creation using the portal
Though this article provides steps to create a VM with accelerated networking using Azure PowerShell, you can also use the Azure portal to create a virtual machine that enables accelerated networking. When you create a VM in the portal, in the Create a virtual machine page, choose the Networking tab. This tab has an option for Accelerated networking. If you have chosen a supported operating system and VM size, this option is automatically set to On. Otherwise, the option is set to Off, and Azure displays the reason why it can't be enabled.
Only supported operating systems can be enabled through the portal. If you are using a custom image, and your image supports accelerated networking, please create your VM using CLI or PowerShell.
After you create the VM, you can confirm whether accelerated networking is enabled. Follow these instructions:
Go to the Azure portal to manage your VMs. Search for and select Virtual machines.
In the virtual machine list, choose your new VM.
In the VM menu bar, choose Networking.
In the network interface information, next to the Accelerated networking label, the portal displays either Disabled or Enabled for the accelerated networking status.
VM creation using PowerShell
Before you proceed, install Azure PowerShell version 1.0.0 or later. To find your currently installed version, run
Get-Module -ListAvailable Az. If you need to install or upgrade, install the latest version of the Az module from the PowerShell Gallery. In a PowerShell session, sign in to an Azure account using Connect-AzAccount.
In the following examples, replace example parameter names with your own values. Example parameter names included myResourceGroup, myNic, and myVM.
Create a virtual network
Create a resource group with New-AzResourceGroup. The following command creates a resource group named myResourceGroup in the centralus location:
New-AzResourceGroup -Name "myResourceGroup" -Location "centralus"
Create a subnet configuration with New-AzVirtualNetworkSubnetConfig. The following command creates a subnet named mySubnet:
$subnet = New-AzVirtualNetworkSubnetConfig ` -Name "mySubnet" ` -AddressPrefix "192.168.1.0/24"
Create a virtual network with New-AzVirtualNetwork, with the mySubnet subnet.
$vnet = New-AzVirtualNetwork -ResourceGroupName "myResourceGroup" ` -Location "centralus" ` -Name "myVnet" ` -AddressPrefix "192.168.0.0/16" ` -Subnet $Subnet
Create a network security group
Create a network security group rule with New-AzNetworkSecurityRuleConfig.
$rdp = New-AzNetworkSecurityRuleConfig ` -Name 'Allow-RDP-All' ` -Description 'Allow RDP' ` -Access Allow ` -Protocol Tcp ` -Direction Inbound ` -Priority 100 ` -SourceAddressPrefix * ` -SourcePortRange * ` -DestinationAddressPrefix * ` -DestinationPortRange 3389
Create a network security group with New-AzNetworkSecurityGroup and assign the Allow-RDP-All security rule to it. Aside from the Allow-RDP-All rule, the network security group contains several default rules. One default rule disables all inbound access from the internet. Once it's created, the Allow-RDP-All rule is assigned to the network security group so that you can remotely connect to the VM.
$nsg = New-AzNetworkSecurityGroup ` -ResourceGroupName myResourceGroup ` -Location centralus ` -Name "myNsg" ` -SecurityRules $rdp
Associate the network security group to the mySubnet subnet with Set-AzVirtualNetworkSubnetConfig. The rule in the network security group is effective for all resources deployed in the subnet.
Set-AzVirtualNetworkSubnetConfig ` -VirtualNetwork $vnet ` -Name 'mySubnet' ` -AddressPrefix "192.168.1.0/24" ` -NetworkSecurityGroup $nsg
Create a network interface with accelerated networking
Create a public IP address with New-AzPublicIpAddress. A public IP address is unnecessary if you don't plan to access the VM from the internet. However, it's required to complete the steps in this article.
$publicIp = New-AzPublicIpAddress ` -ResourceGroupName myResourceGroup ` -Name 'myPublicIp' ` -location centralus ` -AllocationMethod Dynamic
Create a network interface with New-AzNetworkInterface with accelerated networking enabled, and assign the public IP address to the network interface. The following example creates a network interface named myNic in the mySubnet subnet of the myVnet virtual network, assigning the myPublicIp public IP address to it:
$nic = New-AzNetworkInterface ` -ResourceGroupName "myResourceGroup" ` -Name "myNic" ` -Location "centralus" ` -SubnetId $vnet.Subnets.Id ` -PublicIpAddressId $publicIp.Id ` -EnableAcceleratedNetworking
Create a VM and attach the network interface
Set your VM credentials to the
$credvariable using Get-Credential, which prompts you to sign in:
$cred = Get-Credential
Define your VM with New-AzVMConfig. The following command defines a VM named myVM with a VM size that supports accelerated networking (Standard_DS4_v2):
$vmConfig = New-AzVMConfig -VMName "myVm" -VMSize "Standard_DS4_v2"
For a list of all VM sizes and characteristics, see Windows VM sizes.
$vmConfig = Set-AzVMOperatingSystem -VM $vmConfig ` -Windows ` -ComputerName "myVM" ` -Credential $cred ` -ProvisionVMAgent ` -EnableAutoUpdate $vmConfig = Set-AzVMSourceImage -VM $vmConfig ` -PublisherName "MicrosoftWindowsServer" ` -Offer "WindowsServer" ` -Skus "2016-Datacenter" ` -Version "latest"
Attach the network interface that you previously created with Add-AzVMNetworkInterface:
$vmConfig = Add-AzVMNetworkInterface -VM $vmConfig -Id $nic.Id
Create your VM with New-AzVM.
New-AzVM -VM $vmConfig -ResourceGroupName "myResourceGroup" -Location "centralus"
Confirm the Ethernet controller is installed in the Windows VM
Once you create the VM in Azure, connect to the VM and confirm that the Ethernet controller is installed in Windows.
Go to the Azure portal to manage your VMs. Search for and select Virtual machines.
In the virtual machine list, choose your new VM.
In the VM overview page, if the Status of the VM is listed as Creating, wait until Azure finishes creating the VM. The Status will be changed to Running after VM creation is complete.
From the VM overview toolbar, select Connect > RDP > Download RDP File.
Open the .rdp file, and then sign in to the VM with the credentials you entered in the Create a VM and attach the network interface section. If you've never connected to a Windows VM in Azure, see Connect to virtual machine.
After the remote desktop session for your VM appears, right-click the Windows Start button and choose Device Manager.
In the Device Manager window, expand the Network adapters node.
Confirm that the Mellanox ConnectX-3 Virtual Function Ethernet Adapter appears, as shown in the following image:
Accelerated networking is now enabled for your VM.
If the Mellanox adapter fails to start, open an administrator prompt in the remote desktop session and enter the following command:
netsh int tcp set global rss = enabled
Enable accelerated networking on existing VMs
If you've created a VM without accelerated networking, you may enable this feature on an existing VM. The VM must support accelerated networking by meeting the following prerequisites, which are also outlined above:
- The VM must be a supported size for accelerated networking.
- The VM must be a supported Azure Gallery image (and kernel version for Linux).
- All VMs in an availability set or a virtual machine scale set must be stopped or deallocated before you enable accelerated networking on any NIC.
Individual VMs and VMs in an availability set
Stop or deallocate the VM or, if an availability set, all the VMs in the set:
Stop-AzVM -ResourceGroup "myResourceGroup" -Name "myVM"
When you create a VM individually, without an availability set, you only need to stop or deallocate the individual VM to enable accelerated networking. If your VM was created with an availability set, you must stop or deallocate all VMs contained in the availability set before enabling accelerated networking on any of the NICs, so that the VMs end up on a cluster that supports accelerated networking. The stop or deallocate requirement is unnecessary if you disable accelerated networking, because clusters that support accelerated networking also work fine with NICs that don't use accelerated networking.
Enable accelerated networking on the NIC of your VM:
$nic = Get-AzNetworkInterface -ResourceGroupName "myResourceGroup" ` -Name "myNic" $nic.EnableAcceleratedNetworking = $true $nic | Set-AzNetworkInterface
Restart your VM or, if in an availability set, all the VMs in the set, and confirm that accelerated networking is enabled:
Start-AzVM -ResourceGroup "myResourceGroup" ` -Name "myVM"
Virtual machine scale set
A virtual machine scale set is slightly different, but it follows the same workflow.
Stop the VMs:
Stop-AzVmss -ResourceGroupName "myResourceGroup" ` -VMScaleSetName "myScaleSet"
Update the accelerated networking property under the network interface:
$vmss = Get-AzVmss -ResourceGroupName "myResourceGroup" ` -VMScaleSetName "myScaleSet" $vmss.VirtualMachineProfile.NetworkProfile.NetworkInterfaceConfigurations.EnableAcceleratedNetworking = $true Update-AzVmss -ResourceGroupName "myResourceGroup" ` -VMScaleSetName "myScaleSet" ` -VirtualMachineScaleSet $vmss
Set the applied updates to automatic so that the changes are immediately picked up:
$vmss.UpgradePolicy.Mode = "Automatic" Update-AzVmss -ResourceGroupName "myResourceGroup" ` -VMScaleSetName "myScaleSet" ` -VirtualMachineScaleSet $vmss
A scale set has VM upgrades that apply updates using three different settings: automatic, rolling, and manual. In these instructions, the policy is set to automatic, so the scale set picks up the changes immediately after it restarts.
Restart the scale set:
Start-AzVmss -ResourceGroupName "myResourceGroup" ` -VMScaleSetName "myScaleSet"
Once you restart, wait for the upgrades to finish. After the upgrades are done, the virtual function (VF) appears inside the VM. Make sure you're using a supported OS and VM size.
Resizing existing VMs with accelerated networking
If a VM has accelerated networking enabled, you're only able to resize it to a VM that supports accelerated networking.
A VM with accelerated networking enabled can't be resized to a VM instance that doesn't support accelerated networking using the resize operation. Instead, to resize one of these VMs:
Stop or deallocate the VM. For an availability set or scale set, stop or deallocate all the VMs in the availability set or scale set.
Disable accelerated networking on the NIC of the VM. For an availability set or scale set, disable accelerated networking on the NICs of all VMs in the availability set or scale set.
After you disable accelerated networking, move the VM, availability set, or scale set to a new size that doesn't support accelerated networking, and then restart them.