Create a VM (Classic) with multiple NICs using PowerShell

You can create virtual machines (VMs) in Azure and attach multiple network interfaces (NICs) to each of your VMs. Multiple NICs enable separation of traffic types across NICs. For example, one NIC might communicate with the Internet, while another communicates only with internal resources not connected to the Internet. The ability to separate network traffic across multiple NICs is required for many network virtual appliances, such as application delivery and WAN optimization solutions.

Important

Azure has two different deployment models for creating and working with resources: Resource Manager and classic. This article covers using the classic deployment model. Microsoft recommends that most new deployments use the Resource Manager model. Learn how to perform these steps using the Resource Manager deployment model.

Scenario

This document will walk through a deployment that uses multiple NICs in VMs in a specific scenario. In this scenario, you have a two-tiered IaaS workload hosted in Azure. Each tier is deployed in its own subnet in a virtual network (VNet). The front end tier is composed of several web servers, grouped together in a load balancer set for high availability. The back end tier is composed of several database servers. These database servers will be deployed with two NICs each, one for database access, the other for management. The scenario also includes Network Security Groups (NSGs) to control what traffic is allowed to each subnet, and NIC in the deployment. The figure below shows the basic architecture of this scenario.

MultiNIC scenario

The following steps use a resource group named IaaSStory for the WEB servers and a resource group named IaaSStory-BackEnd for the DB servers.

Prerequisites

Before you can create the DB servers, you need to create the IaaSStory resource group with all the necessary resources for this scenario. To create these resources, complete the steps that follow. Create a virtual network by following the steps in the Create a virtual network article.

Prerequisite: Install the Azure PowerShell Module

To perform the steps in this article, you'll need to to install and configure Azure PowerShell and follow the instructions all the way to the end to sign into Azure and select your subscription.

Note

If you don't have an Azure account, you'll need one. Go sign up for a free trial here.

Create the back-end VMs

The back-end VMs depend on the creation of the following resources:

  • Backend subnet. The database servers will be part of a separate subnet, to segregate traffic. The script below expects this subnet to exist in a vnet named WTestVnet.
  • Storage account for data disks. For better performance, the data disks on the database servers will use solid state drive (SSD) technology, which requires a premium storage account. Make sure the Azure location you deploy to support premium storage.
  • Availability set. All database servers will be added to a single availability set, to ensure at least one of the VMs is up and running during maintenance.

Step 1 - Start your script

You can download the full PowerShell script used here. Follow the steps below to change the script to work in your environment.

  1. Change the values of the variables below based on your existing resource group deployed above in Prerequisites.

    $location              = "West US"
    $vnetName              = "WTestVNet"
    $backendSubnetName     = "BackEnd"
    
  2. Change the values of the variables below based on the values you want to use for your backend deployment.

    $backendCSName         = "IaaSStory-Backend"
    $prmStorageAccountName = "iaasstoryprmstorage"
    $avSetName             = "ASDB"
    $vmSize                = "Standard_DS3"
    $diskSize              = 127
    $vmNamePrefix          = "DB"
    $dataDiskSuffix        = "datadisk"
    $ipAddressPrefix       = "192.168.2."
    $numberOfVMs           = 2
    

Step 2 - Create necessary resources for your VMs

You need to create a new cloud service and a storage account for the data disks for all VMs. You also need to specify an image, and a local administrator account for the VMs. To create these resources, complete the following steps:

  1. Create a new cloud service.

    New-AzureService -ServiceName $backendCSName -Location $location
    
  2. Create a new premium storage account.

    New-AzureStorageAccount -StorageAccountName $prmStorageAccountName `
    -Location $location -Type Premium_LRS
    
  3. Set the storage account created above as the current storage account for your subscription.

    $subscription = Get-AzureSubscription | where {$_.IsCurrent -eq $true}  
    Set-AzureSubscription -SubscriptionName $subscription.SubscriptionName `
    -CurrentStorageAccountName $prmStorageAccountName
    
  4. Select an image for the VM.

    $image = Get-AzureVMImage `
    | where{$_.ImageFamily -eq "SQL Server 2014 RTM Web on Windows Server 2012 R2"} `
    | sort PublishedDate -Descending `
    | select -ExpandProperty ImageName -First 1
    
  5. Set the local administrator account credentials.

    $cred = Get-Credential -Message "Enter username and password for local admin account"
    

Step 3 - Create VMs

You need to use a loop to create as many VMs as you want, and create the necessary NICs and VMs within the loop. To create the NICs and VMs, execute the following steps.

  1. Start a for loop to repeat the commands to create a VM and two NICs as many times as necessary, based on the value of the $numberOfVMs variable.

    for ($suffixNumber = 1; $suffixNumber -le $numberOfVMs; $suffixNumber++){
    
  2. Create a VMConfig object specifying the image, size, and availability set for the VM.

    $vmName = $vmNamePrefix + $suffixNumber
    $vmConfig = New-AzureVMConfig -Name $vmName `
        -ImageName $image `
        -InstanceSize $vmSize `
        -AvailabilitySetName $avSetName
    
  3. Provision the VM as a Windows VM.

    Add-AzureProvisioningConfig -VM $vmConfig -Windows `
        -AdminUsername $cred.UserName `
        -Password $cred.GetNetworkCredential().Password
    
  4. Set the default NIC and assign it a static IP address.

    Set-AzureSubnet         -SubnetNames $backendSubnetName -VM $vmConfig
    Set-AzureStaticVNetIP   -IPAddress ($ipAddressPrefix+$suffixNumber+3) -VM $vmConfig
    
  5. Add a second NIC for each VM.

    Add-AzureNetworkInterfaceConfig -Name ("RemoteAccessNIC"+$suffixNumber) `
    -SubnetName $backendSubnetName `
    -StaticVNetIPAddress ($ipAddressPrefix+(53+$suffixNumber)) `
    -VM $vmConfig
    
  6. Create to data disks for each VM.

    $dataDisk1Name = $vmName + "-" + $dataDiskSuffix + "-1"    
    Add-AzureDataDisk -CreateNew -VM $vmConfig `
    -DiskSizeInGB $diskSize `
    -DiskLabel $dataDisk1Name `
    -LUN 0
    
    $dataDisk2Name = $vmName + "-" + $dataDiskSuffix + "-2"   
    Add-AzureDataDisk -CreateNew -VM $vmConfig `
    -DiskSizeInGB $diskSize `
    -DiskLabel $dataDisk2Name `
    -LUN 1
    
  7. Create each VM, and end the loop.

    New-AzureVM -VM $vmConfig `
    -ServiceName $backendCSName `
    -Location $location `
    -VNetName $vnetName
    }
    

Step 4 - Run the script

Now that you downloaded and changed the script based on your needs, runt he script to create the back end database VMs with multiple NICs.

  1. Save your script and run it from the PowerShell command prompt, or PowerShell ISE. You will see the initial output, as shown below.

     OperationDescription    OperationId                          OperationStatus
    
     New-AzureService        xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx Succeeded
     New-AzureStorageAccount xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx Succeeded
    
     WARNING: No deployment found in service: 'IaaSStory-Backend'.
    
  2. Fill out the information needed in the credentials prompt and click OK. The output below is returned.

     New-AzureVM             xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx Succeeded
     New-AzureVM             xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx Succeeded