View virtual hub effective routes

You can view all routes of your Virtual WAN hub in the Azure portal. This article walks you through the steps to view effective routes. For more information about virtual hub routing, see About virtual hub routing.

Select connections or route tables

  1. Navigate to your virtual hub, then select Routing. On the Routing page, select Effective Routes.
  2. From the dropdown, you can select Route Table. If you don't see a Route Table option, this means that you don't have a custom or default route table set up in this virtual hub.

View output

The page output shows the following fields:

  • Prefix: Address prefix known to the current entity (learnt from the virtual hub router)
  • Next hop type: Can be Virtual Network Connection, VPN_S2S_Gateway, ExpressRouteGateway, Remote Hub, or Azure Firewall.
  • Next hop: This is the link to the resource ID of the next hop, or simply shows On-link to imply the current hub.
  • Origin: Resource ID of the routing source.
  • AS Path: BGP Attribute AS (autonomous system) path lists all the AS numbers that need to be traversed to reach the location where the prefix that the path is attached to, is advertised from.

Example

The values in the following example table imply that the virtual hub connection or route table has learned the route of 10.2.0.0/24 (a branch prefix). It has learned the route due to the VPN Next hop type VPN_S2S_Gateway with Next hop VPN Gateway resource ID. Route Origin points to the resource ID of the originating VPN gateway/Route table/Connection. AS Path indicates the AS Path for the branch.

Use the scroll bar at the bottom of the table to view the "AS Path".

Prefix Next hop type Next hop Route Origin AS Path
10.2.0.0/24 VPN_S2S_Gateway /subscriptions/<sub id>/resourceGroups/<resource group name>/providers/Microsoft.Network/vpnGateways/vpngw /subscriptions/<sub id>/resourceGroups/<resource group name>/providers/Microsoft.Network/vpnGateways/vpngw 20000

Considerations:

  • If you see 0.0.0.0/0 in the Get Effective Routes output, it implies the route exists in one of the route tables. However, if this route was set up for internet, an additional flag "enableInternetSecurity": true is required on the connection. The effective route on the VM NIC will not show the route if the "enableInternetSecurity" flag on the connection is "false".

  • The Propagate Default Route field is seen in Azure Virtual WAN portal when you edit a virtual network connection, a VPN connection, or an ExpressRoute connection. This field indicates the enableInternetSecurity flag, which is always by default "false" for ExpressRoute and VPN connections, but "true" for virtual network connections.

  • When viewing effective routes on a VM NIC, if you see the next hop as 'Virtual Network Gateway', that implies the Virtual hub router when the VM is in a spoke connected to a Virtual WAN hub.

  • View Effective routes for a virtual hub route table is populated only if the virtual hub has at least one type of connection (VPN/ER/VNET) connected to it.

Next steps