az network cross-connection peering

  • Reference

Note

This reference is part of the express-route-cross-connection extension for the Azure CLI (version 2.0.41 or higher). The extension will automatically install the first time you run an az network cross-connection peering command. Learn more about extensions.

Manage ExpressRoute peering of an ExpressRoute cross-connection.

Commands

Name Description Type Status
az network cross-connection peering create

Create peering settings for an ExpressRoute cross-connection.

 Extension GA
az network cross-connection peering delete

Delete peering settings.

 Extension GA
az network cross-connection peering list

List peering settings of an ExpressRoute cross-connection.

 Extension GA
az network cross-connection peering show

Get the details of an express route peering.

 Extension GA
az network cross-connection peering update

Update peering settings for an ExpressRoute cross-connection.

 Extension GA

az network cross-connection peering create

Create peering settings for an ExpressRoute cross-connection.

az network cross-connection peering create --cross-connection-name
                                           --peer-asn
                                           --peering-type {AzurePrivatePeering, AzurePublicPeering, MicrosoftPeering}
                                           --primary-peer-subnet
                                           --resource-group
                                           --secondary-peer-subnet
                                           --vlan-id
                                           [--advertised-public-prefixes]
                                           [--customer-asn]
                                           [--routing-registry-name {AFRINIC, ALTDB, APNIC, ARIN, LACNIC, LEVEL3, RADB, RIPENCC}]
                                           [--shared-key]

Examples

Create Microsoft Peering settings with IPv4 configuration.

az network cross-connection peering create -g MyResourceGroup --cross-connection-name MyCircuit \
    --peering-type MicrosoftPeering --peer-asn 10002 --vlan-id 103 \
    --primary-peer-subnet 101.0.0.0/30 --secondary-peer-subnet 102.0.0.0/30 \
    --advertised-public-prefixes 101.0.0.0/30

Required Parameters

--cross-connection-name

ExpressRoute cross-connection name.

--peer-asn

Autonomous system number of the customer/connectivity provider.

--peering-type

BGP peering type for the circuit.

accepted values: AzurePrivatePeering, AzurePublicPeering, MicrosoftPeering
--primary-peer-subnet

/30 subnet used to configure IP addresses for primary interface.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--secondary-peer-subnet

/30 subnet used to configure IP addresses for secondary interface.

--vlan-id

Identifier used to identify the customer.

Optional Parameters

--advertised-public-prefixes

Space-separated list of prefixes to be advertised through the BGP peering.

--customer-asn

Autonomous system number of the customer.

--routing-registry-name

Internet Routing Registry / Regional Internet Registry.

accepted values: AFRINIC, ALTDB, APNIC, ARIN, LACNIC, LEVEL3, RADB, RIPENCC
--shared-key

Key for generating an MD5 for the BGP session.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

accepted values: json, jsonc, none, table, tsv, yaml, yamlc
default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-connection peering delete

Delete peering settings.

az network cross-connection peering delete [--cross-connection-name]
                                           [--ids]
                                           [--name]
                                           [--resource-group]
                                           [--subscription]

Examples

Delete private peering.

az network cross-connection peering delete -g MyResourceGroup --cross-connection-name MyCircuit -n AzurePrivatePeering

Optional Parameters

--cross-connection-name

ExpressRoute cross-connection name.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the peering.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

accepted values: json, jsonc, none, table, tsv, yaml, yamlc
default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-connection peering list

List peering settings of an ExpressRoute cross-connection.

az network cross-connection peering list --cross-connection-name
                                         --resource-group

Examples

List peering settings of an ExpressRoute cross-connection.

az network cross-connection peering list -g MyResourceGroup --cross-connection-name MyCircuit

Required Parameters

--cross-connection-name

ExpressRoute cross-connection name.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

accepted values: json, jsonc, none, table, tsv, yaml, yamlc
default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-connection peering show

Get the details of an express route peering.

az network cross-connection peering show [--cross-connection-name]
                                         [--ids]
                                         [--name]
                                         [--resource-group]
                                         [--subscription]

Examples

Get private peering details of an ExpressRoute cross-connection.

az network cross-connection peering show -g MyResourceGroup --cross-connection-name MyCircuit -n AzurePrivatePeering

Optional Parameters

--cross-connection-name

ExpressRoute cross-connection name.

--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--name -n

The name of the peering.

--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

accepted values: json, jsonc, none, table, tsv, yaml, yamlc
default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.

az network cross-connection peering update

Update peering settings for an ExpressRoute cross-connection.

az network cross-connection peering update [--add]
                                           [--advertised-public-prefixes]
                                           [--cross-connection-name]
                                           [--customer-asn]
                                           [--force-string]
                                           [--ids]
                                           [--ip-version {IPv4, IPv6}]
                                           [--name]
                                           [--peer-asn]
                                           [--primary-peer-subnet]
                                           [--remove]
                                           [--resource-group]
                                           [--routing-registry-name {AFRINIC, ALTDB, APNIC, ARIN, LACNIC, LEVEL3, RADB, RIPENCC}]
                                           [--secondary-peer-subnet]
                                           [--set]
                                           [--shared-key]
                                           [--subscription]
                                           [--vlan-id]

Optional Parameters

--add

Add an object to a list of objects by specifying a path and key value pairs. Example: --add property.listProperty <key=value, string or JSON string>.

default value: []
--advertised-public-prefixes

Space-separated list of prefixes to be advertised through the BGP peering.

--cross-connection-name

ExpressRoute cross-connection name.

--customer-asn

Autonomous system number of the customer.

--force-string

When using 'set' or 'add', preserve string literals instead of attempting to convert to JSON.

default value: False
--ids

One or more resource IDs (space-delimited). It should be a complete resource ID containing all information of 'Resource Id' arguments. You should provide either --ids or other 'Resource Id' arguments.

--ip-version

The IP version to update Microsoft Peering settings for.

accepted values: IPv4, IPv6
default value: IPv4
--name -n

The name of the peering.

--peer-asn

Autonomous system number of the customer/connectivity provider.

--primary-peer-subnet

/30 subnet used to configure IP addresses for primary interface.

--remove

Remove a property or an element from a list. Example: --remove property.list <indexToRemove> OR --remove propertyToRemove.

default value: []
--resource-group -g

Name of resource group. You can configure the default group using az configure --defaults group=<name>.

--routing-registry-name

Internet Routing Registry / Regional Internet Registry.

accepted values: AFRINIC, ALTDB, APNIC, ARIN, LACNIC, LEVEL3, RADB, RIPENCC
--secondary-peer-subnet

/30 subnet used to configure IP addresses for secondary interface.

--set

Update an object by specifying a property path and value to set. Example: --set property1.property2=<value>.

default value: []
--shared-key

Key for generating an MD5 for the BGP session.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--vlan-id

Identifier used to identify the customer.

Global Parameters
--debug

Increase logging verbosity to show all debug logs.

--help -h

Show this help message and exit.

--only-show-errors

Only show errors, suppressing warnings.

--output -o

Output format.

accepted values: json, jsonc, none, table, tsv, yaml, yamlc
default value: json
--query

JMESPath query string. See http://jmespath.org/ for more information and examples.

--subscription

Name or ID of subscription. You can configure the default subscription using az account set -s NAME_OR_ID.

--verbose

Increase logging verbosity. Use --debug for full debug logs.