Create stand-alone media
Applies to: Configuration Manager (current branch)
Stand-alone media in Configuration Manager contains everything required to deploy the OS on a computer without a network connection.
Use stand-alone media with the following OS deployment scenarios:
Stand-alone media includes the task sequence that automates the steps to install the OS, and all other required content. This content includes the boot image, OS image, and device drivers. Because the stand-alone media stores everything to deploy the OS, it requires more disk space than required for other types of media.
When you create stand-alone media on a central administration site, the client retrieves its assigned site code from Active Directory. Stand-alone media created at child sites automatically assigns to the client the site code for that site.
Before you create stand-alone media by using the Create Task Sequence Media Wizard, be sure that all of these conditions are met.
Create a task sequence to deploy an OS
As part of the stand-alone media, specify the task sequence to deploy an OS. For more information, see Create a task sequence to install an OS.
Unsupported actions for stand-alone media
The following actions aren't supported for stand-alone media:
The Auto Apply Drivers step in the task sequence. Stand-alone media doesn't support automatic application of device drivers from the driver catalog. Use the Apply Driver Package step to make a specified set of drivers available to Windows Setup.
The Download Package Content step in the task sequence. The management point information isn't available on stand-alone media, so the step fails trying to enumerate content locations.
Installing software updates.
Installing software before deploying the OS.
Custom task sequences for non-OS deployments.
Associating users with the destination computer to support user device affinity.
Dynamic package installs via the Install Packages step.
Dynamic application installs via the Install Application step.
The Use pre-production client package when available setting in the Setup Windows and ConfigMgr task sequence step. For more information about this setting, see Setup Windows and ConfigMgr.
An error might occur if your task sequence includes the Install Package step and you create the stand-alone media at a central administration site. The central administration site doesn't have the necessary client configuration policies. These policies are required to enable the software distribution agent when the task sequence runs. The following error might appear in the CreateTsMedia.log file:
WMI method SMS_TaskSequencePackage.GetClientConfigPolicies failed (0x80041001)
For stand-alone media that includes an Install Package step, create the stand-alone media at a primary site that has the software distribution agent enabled.
Alternatively, use a custom Run Command Line step. Add it after the Setup Windows and ConfigMgr step and before the first Install Package step. The Run Command Line step runs the following WMIC command to enable the software distribution agent before the first Install Package step:
WMIC /namespace:\\\root\ccm\policy\machine\requestedconfig path ccm_SoftwareDistributionClientConfig CREATE ComponentName="Enable SWDist", Enabled="true", LockSettings="TRUE", PolicySource="local", PolicyVersion="1.0", SiteSettingsKey="1" /NOINTERACTIVE
Distribute all content associated with the task sequence
Distribute all content that the task sequence requires to at least one distribution point. This content includes the boot image, OS image, and other associated files. The wizard gathers the content from the distribution point when it creates the media.
Your user account needs at least Read access rights to the content library on that distribution point. For more information, see Distribute content.
Prepare the removable USB drive
If you're using a removable USB drive, connect it to the computer where you run the Create Task Sequence Media wizard. The USB drive must be detectable by Windows as a removal device. The wizard writes directly to the USB drive when it creates the media.
Stand-alone media uses a FAT32 file system. You can't create stand-alone media on a removable USB drive whose content contains a file over 4 GB in size.
Create an output folder
Before you run the Create Task Sequence Media Wizard to create media for a CD or DVD set, create a folder for the output files it creates. Media that it creates for a CD or DVD set is written as an .ISO file directly in the folder.
In the Configuration Manager console, go to the Software Library workspace, expand Operating Systems, and select the Task Sequences node.
On the Home tab of the ribbon, in the Create group, select Create Task Sequence Media. This action starts the Create Task Sequence Media Wizard.
On the Select Media Type page, specify the following options:
Select Stand-alone media.
Optionally, if you want to only allow the OS to be deployed without requiring user input, select Allow unattended operating system deployment.
When you select this option, the user isn't prompted for network configuration information or for optional task sequences. If you configure the media for password protection, the user is still prompted for a password.
On the Media Type page, specify whether the media is a Removable USB drive or a CD/DVD set. Then configure the following options:
Media uses a FAT32 file system. You can't create media on a USB drive whose content contains a file over 4 GB in size.
If you select Removable USB drive, select the drive where you want to store the content.
- Format removable USB drive (FAT32) and make bootable: By default, let Configuration Manager prepare the USB drive. Many newer UEFI devices require a bootable FAT32 partition. However, this format also limits the size of files and overall capacity of the drive. If you've already formatted and configured the removable drive, disable this option.
If you select CD/DVD set, specify the capacity of the media (Media size) and the name and path of the output file (Media file). The wizard writes the output files to this location. For example:
If the capacity of the media is too small to store the entire content, it creates multiple files. Then you need to store the content on multiple CDs or DVDs. When it requires multiple media files, Configuration Manager adds a sequence number to the name of each output file that it creates.
If you deploy an application along with the OS, and the application can't fit on a single media, Configuration Manager stores the application across multiple media. When the stand-alone media is run, Configuration Manager prompts the user for the next media where the application is stored.
If you select an existing .iso image, the Task Sequence Media Wizard deletes that image from the drive or share as soon as you proceed to the next page of the wizard. The existing image is deleted, even if you then cancel the wizard.
Staging folder: The media creation process can require a lot of temporary drive space. By default this location is similar to the following path:
%UserProfile%\AppData\Local\Temp. Starting in version 1902, to give you greater flexibility with where to store these temporary files, change this value to another drive and path.
Media label: Starting in version 1902, add a label to task sequence media. This label helps you better identify the media after you create it. The default value is
Configuration Manager. This text field appears in the following locations:
If you mount an ISO file, Windows displays this label as the name of the mounted drive
If you format a USB drive, it uses the first 11 characters of the label as its name
Configuration Manager writes a text file called
MediaLabel.txtto the root of the media. By default, the file includes a single line of text:
label=Configuration Manager. If you customize the label for media, this line uses your custom label instead of the default value.
Include autorun.inf file on media: Starting in version 1906, Configuration Manager doesn't add an autorun.inf file by default. This file is commonly blocked by antimalware products. For more information on the AutoRun feature of Windows, see Creating an AutoRun-enabled CD-ROM Application. If still necessary for your scenario, select this option to include the file.
On the Security page, specify the following options:
Protect media with a password: Enter a strong password to help protect the media from unauthorized access. When you specify a password, the user must provide that password to use the media.
As a security best practice, always assign a password to help protect the media.
On stand-alone media, it only encrypts the task sequence steps and their variables. It doesn't encrypt the remaining content of the media. Don't include any sensitive information in task sequence scripts. Store and implement all sensitive information by using task sequence variables.
Select date range for this stand-alone media to be valid: Set optional start and expiration dates on the media. This setting is disabled by default. The dates are compared to the system time on the computer before the stand-alone media runs. When the system time is earlier than the start time or later than the expiration time, the stand-alone media doesn't start. These options are also available by using the New-CMStandaloneMedia PowerShell cmdlet.
On the Stand-Alone CD/DVD page, select the task sequence that deploys the OS. You can only select those task sequences that are associated with a boot image. Verify the list of content referenced by the task sequence.
Detect associated application dependencies and add them to this media: Also add content to the media for application dependencies.
If you don't see expected application dependencies, deselect and then reselect this option to refresh the list.
On the Select Application page, specify additional application content to include as part of the media file.
On the Select Package page, specify additional package content to include as part of the media file.
On the Select Driver Package page, specify additional driver package content to include as part of the media file.
On the Distribution Points page, specify the distribution points that contain the required content.
Configuration Manager only displays distribution points that have the content. Distribute all of the content associated with the task sequence to at least one distribution point before you continue. After you distribute the content, refresh the distribution point list. Remove any distribution points that you already selected on this page, go to the previous page, and then back to the Distribution Points page. Alternatively, restart the wizard. For more information, see Distribute content referenced by a task sequence and Manage content and content infrastructure.
On the Customization page, specify the following options:
Add any variables that the task sequence uses.
Enable prestart command: Specify any prestart commands that you want to run before the task sequence runs. Prestart commands are a script or an executable that can interact with the user in Windows PE before the task sequence runs. For more information, see Prestart commands for task sequence media.
During media creation, the task sequence writes the package ID and prestart command-line, including the value for any task sequence variables, to the CreateTSMedia.log file on the computer that runs the Configuration Manager console. You can review this log file to verify the value for the task sequence variables.
If the prestart command requires any content, select the option to Include files for the prestart command.
Complete the wizard.
The stand-alone media files (.ISO) are created in the destination folder. If you selected CD/DVD set, copy the output files to a set of CDs or DVDs.