<algorithm>
Defines C++ Standard Library container template functions that perform algorithms.
Syntax
(see relevant links below for specific algorithm syntax)
Note
The <algorithm>
library also uses the #include <initializer_list>
statement.
Remarks
The C++ Standard Library algorithms are generic because they can operate on a variety of data structures. The data structures that they can operate on include not only the C++ Standard Library container classes such as vector
and list
, but also programdefined data structures and arrays of elements that satisfy the requirements of a particular algorithm. C++ Standard Library algorithms achieve this level of generality by accessing and traversing the elements of a container indirectly through iterators.
C++ Standard Library algorithms process iterator ranges that are typically specified by their beginning or ending positions. The ranges referred to must be valid in the sense that all pointers in the ranges must be dereferenceable and, within the sequences of each range, the last position must be reachable from the first by incrementation.
The C++ Standard Library algorithms extend the actions supported by the operations and member functions of each C++ Standard Library container and allow working, for example, with different types of container objects at the same time. Two suffixes have been used to convey information about the purpose of the algorithms.
The
_if
suffix indicates that the algorithm is used with function objects operating on the values of the elements rather than on the elements themselves. Thefind_if
algorithm looks for elements whose values satisfy the criterion specified by a function object, and thefind
algorithm searches for a particular value.The _copy suffix indicates that the algorithm not only manipulates the values of the elements but also copies the modified values into a destination range. The
reverse
algorithm reverses the order of the elements within a range, and thereverse_copy
algorithm also copies the result into a destination range.
C++ Standard Library algorithms are often classified into groups that indicate something about their purpose or requirements. These include modifying algorithms that change the value of elements as compared with nonmodifying algorithms that do not. Mutating algorithms change the order of elements, but not the values of their elements. Removing algorithms can eliminate elements from a range or a copy of a range. Sorting algorithms reorder the elements in a range in various ways and sorted range algorithms only act on ranges whose elements have been sorted in a particular way.
The C++ Standard Library numeric algorithms that are provided for numerical processing have their own header file <numeric>
, and function objects and adaptors are defined in the header <functional>
Function objects that return Boolean values are known as predicates. The default binary predicate is the comparison operator<
. In general, the elements being ordered need to be less than comparable so that, given any two elements, it can be determined either that they are equivalent (in the sense that neither is less than the other) or that one is less than the other. This results in an ordering among the nonequivalent elements.
Function templates
Name  Description 

adjacent_find 
Searches for two adjacent elements that are either equal or satisfy a specified condition. 
all_of 
Returns true when a condition is present at each element in the given range. 
any_of 
Returns true when a condition is present at least once in the specified range of elements. 
binary_search 
Tests whether there is an element in a sorted range that is equal to a specified value or that is equivalent to it in a sense specified by a binary predicate. 
clamp 

copy 
Assigns the values of elements from a source range to a destination range, iterating through the source sequence of elements and assigning them new positions in a forward direction. 
copy_backward 
Assigns the values of elements from a source range to a destination range, iterating through the source sequence of elements and assigning them new positions in a backward direction. 
copy_if 
Copy all elements in a given range that test true for a specified condition 
copy_n 
Copies a specified number of elements. 
count 
Returns the number of elements in a range whose values match a specified value. 
count_if 
Returns the number of elements in a range whose values match a specified condition. 
equal 
Compares two ranges element by element either for equality or equivalence in a sense specified by a binary predicate. 
equal_range 
Finds a pair of positions in an ordered range, the first less than or equivalent to the position of a specified element and the second greater than the element's position, where the sense of equivalence or ordering used to establish the positions in the sequence may be specified by a binary predicate. 
fill 
Assigns the same new value to every element in a specified range. 
fill_n 
Assigns a new value to a specified number of elements in a range starting with a particular element. 
find 
Locates the position of the first occurrence of an element in a range that has a specified value. 
find_end 
Looks in a range for the last subsequence that is identical to a specified sequence or that is equivalent in a sense specified by a binary predicate. 
find_first_of 
Searches for the first occurrence of any of several values within a target range or for the first occurrence of any of several elements that are equivalent in a sense specified by a binary predicate to a specified set of the elements. 
find_if 
Locates the position of the first occurrence of an element in a range that satisfies a specified condition. 
find_if_not 
Returns the first element in the indicated range that does not satisfy a condition. 
for_each 
Applies a specified function object to each element in a forward order within a range and returns the function object. 
for_each_n 

generate 
Assigns the values generated by a function object to each element in a range. 
generate_n 
Assigns the values generated by a function object to a specified number of element is a range and returns to the position one past the last assigned value. 
includes 
Tests whether one sorted range contains all the elements contained in a second sorted range, where the ordering or equivalence criterion between elements may be specified by a binary predicate. 
inplace_merge 
Combines the elements from two consecutive sorted ranges into a single sorted range, where the ordering criterion may be specified by a binary predicate. 
is_heap 
Returns true if the elements in the specified range form a heap. 
is_heap_until 
Returns true if the specified range forms a heap until the last element. 
is_partitioned 
Returns true if all the elements in the given range that test true for a condition come before any elements that test false . 
is_permutation 
Determines whether the elements in a given range form a valid permutation. 
is_sorted 
Returns true if the elements in the specified range are in sorted order. 
is_sorted_until 
Returns true if the elements in the specified range are in sorted order. 
iter_swap 
Exchanges two values referred to by a pair of specified iterators. 
lexicographical_compare 
Compares element by element between two sequences to determine which is lesser of the two. 
lower_bound 
Finds the position of the first element in an ordered range that has a value greater than or equivalent to a specified value, where the ordering criterion may be specified by a binary predicate. 
make_heap 
Converts elements from a specified range into a heap in which the first element is the largest and for which a sorting criterion may be specified with a binary predicate. 
max 
Compares two objects and returns the larger of the two, where the ordering criterion may be specified by a binary predicate. 
max_element 
Finds the first occurrence of largest element in a specified range where the ordering criterion may be specified by a binary predicate. 
merge 
Combines all the elements from two sorted source ranges into a single, sorted destination range, where the ordering criterion may be specified by a binary predicate. 
min 
Compares two objects and returns the lesser of the two, where the ordering criterion may be specified by a binary predicate. 
min_element 
Finds the first occurrence of smallest element in a specified range where the ordering criterion may be specified by a binary predicate. 
minmax 
Compares two input parameters and returns them as a pair, in order of least to greatest. 
minmax_element 
Performs the work performed by min_element and max_element in one call. 
mismatch 
Compares two ranges element by element either for equality or equivalent in a sense specified by a binary predicate and locates the first position where a difference occurs. 
<alg> move 
Move elements associated with a specified range. 
move_backward 
Moves the elements of one iterator to another. The move starts with the last element in a specified range, and ends with the first element in that range. 
next_permutation 
Reorders the elements in a range so that the original ordering is replaced by the lexicographically next greater permutation if it exists, where the sense of next may be specified with a binary predicate. 
none_of 
Returns true when a condition is never present among elements in the given range. 
nth_element 
Partitions a range of elements, correctly locating the nth element of the sequence in the range so that all the elements in front of it are less than or equal to it and all the elements that follow it in the sequence are greater than or equal to it. 
partial_sort 
Arranges a specified number of the smaller elements in a range into a nondescending order or according to an ordering criterion specified by a binary predicate. 
partial_sort_copy 
Copies elements from a source range into a destination range where the source elements are ordered by either less than or another specified binary predicate. 
partition 
Classifies elements in a range into two disjoint sets, with those elements satisfying a unary predicate preceding those that fail to satisfy it. 
partition_copy 
Copies elements for which a condition is true to one destination, and for which the condition is false to another. The elements must come from a specified range. 
partition_point 
Returns the first element in the given range that does not satisfy the condition. The elements are sorted so that those that satisfy the condition come before those that do not. 
pop_heap 
Removes the largest element from the front of a heap to the nexttolast position in the range and then forms a new heap from the remaining elements. 
prev_permutation 
Reorders the elements in a range so that the original ordering is replaced by the lexicographically next greater permutation if it exists, where the sense of next may be specified with a binary predicate. 
push_heap 
Adds an element that is at the end of a range to an existing heap consisting of the prior elements in the range. 
random_shuffle 
Rearranges a sequence of N elements in a range into one of N! possible arrangements selected at random. 
remove 
Eliminates a specified value from a given range without disturbing the order of the remaining elements and returning the end of a new range free of the specified value. 
remove_copy 
Copies elements from a source range to a destination range, except that elements of a specified value are not copied, without disturbing the order of the remaining elements and returning the end of a new destination range. 
remove_copy_if 
Copies elements from a source range to a destination range, except that satisfying a predicate are not copied, without disturbing the order of the remaining elements and returning the end of a new destination range. 
remove_if 
Eliminates elements that satisfy a predicate from a given range without disturbing the order of the remaining elements and returning the end of a new range free of the specified value. 
replace 
Examines each element in a range and replaces it if it matches a specified value. 
replace_copy 
Examines each element in a source range and replaces it if it matches a specified value while copying the result into a new destination range. 
replace_copy_if 
Examines each element in a source range and replaces it if it satisfies a specified predicate while copying the result into a new destination range. 
replace_if 
Examines each element in a range and replaces it if it satisfies a specified predicate. 
reverse 
Reverses the order of the elements within a range. 
reverse_copy 
Reverses the order of the elements within a source range while copying them into a destination range 
rotate 
Exchanges the elements in two adjacent ranges. 
rotate_copy 
Exchanges the elements in two adjacent ranges within a source range and copies the result to a destination range. 
sample 

search 
Searches for the first occurrence of a sequence within a target range whose elements are equal to those in a given sequence of elements or whose elements are equivalent in a sense specified by a binary predicate to the elements in the given sequence. 
search_n 
Searches for the first subsequence in a range that of a specified number of elements having a particular value or a relation to that value as specified by a binary predicate. 
set_difference 
Unites all of the elements that belong to one sorted source range, but not to a second sorted source range, into a single, sorted destination range, where the ordering criterion may be specified by a binary predicate. 
set_intersection 
Unites all of the elements that belong to both sorted source ranges into a single, sorted destination range, where the ordering criterion may be specified by a binary predicate. 
set_symmetric_difference 
Unites all of the elements that belong to one, but not both, of the sorted source ranges into a single, sorted destination range, where the ordering criterion may be specified by a binary predicate. 
set_union 
Unites all of the elements that belong to at least one of two sorted source ranges into a single, sorted destination range, where the ordering criterion may be specified by a binary predicate. 
sort 
Arranges the elements in a specified range into a nondescending order or according to an ordering criterion specified by a binary predicate. 
shuffle 
Shuffles (rearranges) elements for a given range using a random number generator. 
sort_heap 
Converts a heap into a sorted range. 
stable_partition 
Classifies elements in a range into two disjoint sets, with those elements satisfying a unary predicate preceding those that fail to satisfy it, preserving the relative order of equivalent elements. 
stable_sort 
Arranges the elements in a specified range into a nondescending order or according to an ordering criterion specified by a binary predicate and preserves the relative ordering of equivalent elements. 
swap 
Exchanges the values of the elements between two types of objects, assigning the contents of the first object to the second object and the contents of the second to the first. 
swap_ranges 
Exchanges the elements of one range with the elements of another, equal sized range. 
transform 
Applies a specified function object to each element in a source range or to a pair of elements from two source ranges and copies the return values of the function object into a destination range. 
unique 
Removes duplicate elements that are adjacent to each other in a specified range. 
unique_copy 
Copies elements from a source range into a destination range except for the duplicate elements that are adjacent to each other. 
upper_bound 
Finds the position of the first element in an ordered range that has a value that is greater than a specified value, where the ordering criterion may be specified by a binary predicate. 
See also
Header Files Reference
Thread Safety in the C++ Standard Library
C++ Standard Library Reference