CustomXmlMoveToRangeEnd CustomXmlMoveToRangeEnd CustomXmlMoveToRangeEnd Class

Definition

Defines the CustomXmlMoveToRangeEnd Class. When the object is serialized out as xml, its qualified name is w:customXmlMoveToRangeEnd.

public class CustomXmlMoveToRangeEnd : DocumentFormat.OpenXml.Wordprocessing.MarkupType
type CustomXmlMoveToRangeEnd = class
    inherit MarkupType
Public Class CustomXmlMoveToRangeEnd
Inherits MarkupType
Inheritance

Remarks

[ISO/IEC 29500-1 1st Edition]

customXmlMoveToRangeEnd (Custom XML Markup Move Destination Location End)

This element specifies the end of a region within which all custom XML markup was moved to this location in the document and this move was tracked as a revision. The id attribute on this element shall be used to link this element with the corresponding custom XML move destination start marker in the document.

Providing a physical representation of the start and end tags of custom XML markup results in regions which can be inserted and deleted independently, but cannot be encapsulated by a single revision element, since their representation in WordprocessingML is the start or end XML tag for the custom XML markup which it represents. Therefore, the start/end "cross structure" annotation format surrounds the WordprocessingML region to which this move destination applies.

The following restrictions shall be applied to this element:

  • If this element occurs without a corresponding customXmlMoveToRangeStart element (§17.13.5.11) with a matching id attribute value, then the document is non-conformant.

  • If this element and its paired start encapsulate a range with no custom XML markup, then the document is non-conformant.

  • If this element and its paired start occur outside of a well-formed move source container (§17.13.5.24; §17.13.5.23) with a matching move destination container (§17.13.5.28; §17.13.5.27), then the document is non-conformant.

  • If multiple end elements exist with the same id attribute value, then the document is non-conformant .

[Example: Consider a three-paragraph document with a single block-level custom XML markup element, as follows:

<w:body>  
  <w:p/>  
  <w:customXml … >  
    <w:p/>  
  </w:customXml>  
  <w:p/>  
</w:body>  

If the second paragraph is moved to the end of the document with revisions enabled. This revision must therefore be stored using the custom XML markup revision "cross structure" syntax, as follows:

<w:body>  
  <w:p/>  
  <w:moveFromRangeStart w:id="0" w:name="move1" w:displacedByCustomXml="next" w:author="Example Author"/>  
  <w:customXmlMoveFromRangeStart w:id="1"/>  
  <w:customXml … >  
    <w:p/>  
  </w:customXml>  
  <w:customXmlMoveFromRangeEnd w:id="1"/>  
  <w:moveFromRangeEnd w:id="0" w:displacedByCustomXml="prev"/>  
  <w:p/>  
  <w:moveToRangeStart w:id="2" w:name="move1" w:displacedByCustomXml="next"/>  
  <w:customXmlMoveToRangeStart w:id="3"/>  
  <w:customXml … >  
    <w:p/>  
  </w:customXml>  
  <w:customXmlMoveToRangeEnd w:id="3"/>  
  <w:moveFromRangeEnd w:id="2" w:displacedByCustomXml="prev"/>  
</w:body>  

The customXmlMoveToRangeEnd element delimits the end of the region in which all custom XML elements have been moved to this location with revisions enabled. Since this element only affects custom XML, any text in the region is not revision marked moved by this element when present, but the corresponding physical characters for the custom XML element are. end example]

Parent Elements
bdo (§17.3.2.3); body (§17.2.2); comment (§17.13.4.2); customXml (§17.5.1.6); customXml (§17.5.1.4); customXml (§17.5.1.5); customXml (§17.5.1.3); deg (§22.1.2.26); del (§17.13.5.14); den (§22.1.2.28); dir (§17.3.2.8); docPartBody (§17.12.6); e (§22.1.2.32); endnote (§17.11.2); fldSimple (§17.16.19); fName (§22.1.2.37); footnote (§17.11.10); ftr (§17.10.3); hdr (§17.10.4); hyperlink (§17.16.22); ins (§17.13.5.18); lim (§22.1.2.52); moveFrom (§17.13.5.22); moveTo (§17.13.5.25); num (§22.1.2.75); oMath (§22.1.2.77); p (§17.3.1.22); rt (§17.3.3.24); rubyBase (§17.3.3.27); sdtContent (§17.5.2.34); sdtContent (§17.5.2.33); sdtContent (§17.5.2.35); sdtContent (§17.5.2.36); smartTag (§17.5.1.9); sub (§22.1.2.112); sup (§22.1.2.114); tbl (§17.4.38); tc (§17.4.66); tr (§17.4.79)

[Note: The W3C XML Schema definition of this element’s content model (CT_Markup) is located in §A.1. end note]

� ISO/IEC29500: 2008.

Constructors

CustomXmlMoveToRangeEnd() CustomXmlMoveToRangeEnd() CustomXmlMoveToRangeEnd()

Initializes a new instance of the CustomXmlMoveToRangeEnd class.

Properties

ChildElements ChildElements ChildElements

Gets all the child nodes of the current element.

(Inherited from OpenXmlElement)
ExtendedAttributes ExtendedAttributes ExtendedAttributes

Gets all extended attributes (attributes not defined in the schema) of the current element.

(Inherited from OpenXmlElement)
FirstChild FirstChild FirstChild

Gets the first child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element.

(Inherited from OpenXmlElement)
HasAttributes HasAttributes HasAttributes

Gets a boolean value that indicates whether the current element has any attributes.

(Inherited from OpenXmlElement)
HasChildren HasChildren HasChildren

Gets a value that indicates whether the current element has any child elements.

(Inherited from OpenXmlLeafElement)
Id Id Id

Annotation Identifier.Represents the following attribute in the schema: w:id

(Inherited from MarkupType)
InnerText InnerText InnerText

Gets the concatenated values of the node and all of its children.

(Inherited from OpenXmlElement)
InnerXml InnerXml InnerXml

Gets or sets the markup that only represents child elements of the current element.

(Inherited from OpenXmlLeafElement)
LastChild LastChild LastChild

Gets the last child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element.

(Inherited from OpenXmlElement)
LocalName LocalName LocalName

Gets the local name of the element.

MCAttributes MCAttributes MCAttributes

Sets the markup compatibility attributes. Returns null if no markup compatibility attributes are defined for the current element.

(Inherited from OpenXmlElement)
NamespaceDeclarations NamespaceDeclarations NamespaceDeclarations

Gets all the namespace declarations defined in the current element. Returns an empty enumerator if there is no namespace declaration.

(Inherited from OpenXmlElement)
NamespaceUri NamespaceUri NamespaceUri

Gets the namespace URI of the current element.

(Inherited from OpenXmlElement)
OpenXmlElementContext OpenXmlElementContext OpenXmlElementContext

Gets the OpenXmlEementContext of the current element.

(Inherited from OpenXmlElement)
OuterXml OuterXml OuterXml

Gets the markup that represents the current element and all of its child elements.

(Inherited from OpenXmlElement)
Parent Parent Parent

Gets the parent element of the current element.

(Inherited from OpenXmlElement)
Prefix Prefix Prefix

Gets the namespace prefix of current element.

(Inherited from OpenXmlElement)
XmlQualifiedName XmlQualifiedName XmlQualifiedName

Gets the qualified name of the current element.

(Inherited from OpenXmlElement)
XName XName XName

Gets the qualified name of the current element.

(Inherited from OpenXmlElement)

Methods

AddAnnotation(Object) AddAnnotation(Object) AddAnnotation(Object)

Adds an object to the current OpenXmlElement element's list of annotations.

(Inherited from OpenXmlElement)
AddNamespaceDeclaration(String, String) AddNamespaceDeclaration(String, String) AddNamespaceDeclaration(String, String)

Adds a namepace declaration to the current node.

(Inherited from OpenXmlElement)
Ancestors() Ancestors() Ancestors()

Enumerates all of the current element's ancestors.

(Inherited from OpenXmlElement)
Ancestors<T>() Ancestors<T>() Ancestors<T>()

Enumerates only the current element's ancestors that have the specified type.

(Inherited from OpenXmlElement)
Annotation(Type) Annotation(Type) Annotation(Type)

Get the first annotation object of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotation<T>() Annotation<T>() Annotation<T>()

Get the first annotation object of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotations(Type) Annotations(Type) Annotations(Type)

Gets a collection of annotations with the specified type for the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotations<T>() Annotations<T>() Annotations<T>()

Gets a collection of annotations with the specified type for the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Append(IEnumerable<OpenXmlElement>) Append(IEnumerable<OpenXmlElement>) Append(IEnumerable<OpenXmlElement>)

Appends each element from a list of elements to the end of the current element's list of child elements.

(Inherited from OpenXmlElement)
Append(OpenXmlElement[]) Append(OpenXmlElement[]) Append(OpenXmlElement[])

Appends each element from an array of elements to the end of the current element's list of child elements.

(Inherited from OpenXmlElement)
AppendChild<T>(T) AppendChild<T>(T) AppendChild<T>(T)

Appends the specified element to the end of the current element's list of child nodes.

(Inherited from OpenXmlElement)
ClearAllAttributes() ClearAllAttributes() ClearAllAttributes()

Clears all of the attributes, including both known attributes and extended attributes.

(Inherited from OpenXmlElement)
Clone() Clone() Clone()

Creates a duplicate of the current node.

(Inherited from OpenXmlElement)
CloneNode(Boolean) CloneNode(Boolean) CloneNode(Boolean)

Creates a duplicate of this node.

Descendants() Descendants() Descendants()

Enumerates all of the current element's descendants.

(Inherited from OpenXmlElement)
Descendants<T>() Descendants<T>() Descendants<T>()

Enumerate all of the current element's descendants of type T.

(Inherited from OpenXmlElement)
Elements() Elements() Elements()

Enumerates all of the current element's children.

(Inherited from OpenXmlElement)
Elements<T>() Elements<T>() Elements<T>()

Enumerates only the current element's children that have the specified type.

(Inherited from OpenXmlElement)
ElementsAfter() ElementsAfter() ElementsAfter()

Enumerates all of the sibling elements that follow the current element and have the same parent as the current element.

(Inherited from OpenXmlElement)
ElementsBefore() ElementsBefore() ElementsBefore()

Enumerates all of the sibling elements that precede the current element and have the same parent as the current element.

(Inherited from OpenXmlElement)
GetAttribute(String, String) GetAttribute(String, String) GetAttribute(String, String)

Gets an Open XML attribute with the specified tag name and namespace URI.

(Inherited from OpenXmlElement)
GetAttributes() GetAttributes() GetAttributes()

Gets a list that contains a copy of all the attributes.

(Inherited from OpenXmlElement)
GetEnumerator() GetEnumerator() GetEnumerator()

Returns an enumerator that iterates through the child collection.

(Inherited from OpenXmlElement)
GetFirstChild<T>() GetFirstChild<T>() GetFirstChild<T>()

Finds the first child element in type T.

(Inherited from OpenXmlElement)
InsertAfter<T>(T, OpenXmlElement) InsertAfter<T>(T, OpenXmlElement) InsertAfter<T>(T, OpenXmlElement)

Inserts the specified element immediately after the specified reference element.

(Inherited from OpenXmlElement)
InsertAfterSelf<T>(T) InsertAfterSelf<T>(T) InsertAfterSelf<T>(T)

Inserts the specified element immediately after the current element.

(Inherited from OpenXmlElement)
InsertAt<T>(T, Int32) InsertAt<T>(T, Int32) InsertAt<T>(T, Int32)

Inserts the specified element at the specified index in the current element's list of child elements.

(Inherited from OpenXmlElement)
InsertBefore<T>(T, OpenXmlElement) InsertBefore<T>(T, OpenXmlElement) InsertBefore<T>(T, OpenXmlElement)

Inserts the specified element immediately before the specified reference element.

(Inherited from OpenXmlElement)
InsertBeforeSelf<T>(T) InsertBeforeSelf<T>(T) InsertBeforeSelf<T>(T)

Inserts the specified element immediately before the current element.

(Inherited from OpenXmlElement)
IsAfter(OpenXmlElement) IsAfter(OpenXmlElement) IsAfter(OpenXmlElement)

Determines if the current element appears after a specified element in document order.

(Inherited from OpenXmlElement)
IsBefore(OpenXmlElement) IsBefore(OpenXmlElement) IsBefore(OpenXmlElement)

Determines if the current element appears before a specified element in document order.

(Inherited from OpenXmlElement)
LookupNamespace(String) LookupNamespace(String) LookupNamespace(String)

Resolves the namespace prefix in the context of the current node.

(Inherited from OpenXmlElement)
LookupPrefix(String) LookupPrefix(String) LookupPrefix(String)

Finds the corresponding prefix for a namespace uri in the current element scope.

(Inherited from OpenXmlElement)
NextSibling() NextSibling() NextSibling()

Gets the OpenXmlElement element that immediately follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement element.

(Inherited from OpenXmlElement)
NextSibling<T>() NextSibling<T>() NextSibling<T>()

Gets the OpenXmlElement element with the specified type that follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement.

(Inherited from OpenXmlElement)
PrependChild<T>(T) PrependChild<T>(T) PrependChild<T>(T)

Inserts the specified element at the beginning of the current element's list of child elements.

(Inherited from OpenXmlElement)
PreviousSibling() PreviousSibling() PreviousSibling()

Gets the OpenXmlElement element that immediately precedes the current OpenXmlElement element. Returns null (Nothing in Visual Basic ) if there is no preceding OpenXmlElement element.

(Inherited from OpenXmlElement)
PreviousSibling<T>() PreviousSibling<T>() PreviousSibling<T>()

Gets the OpenXmlElement element with the specified type that precedes the current OpenXmlElement. Returns null (Nothing in Visual Basic) if there is no preceding OpenXmlElement element.

(Inherited from OpenXmlElement)
Remove() Remove() Remove()

Removes the current element from its parent.

(Inherited from OpenXmlElement)
RemoveAllChildren() RemoveAllChildren() RemoveAllChildren()

Removes all child elements of the current element.

(Inherited from OpenXmlLeafElement)
RemoveAllChildren<T>() RemoveAllChildren<T>() RemoveAllChildren<T>()

Remove all of the current element's child elements that are of type T.

(Inherited from OpenXmlElement)
RemoveAnnotations(Type) RemoveAnnotations(Type) RemoveAnnotations(Type)

Removes the annotations of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
RemoveAnnotations<T>() RemoveAnnotations<T>() RemoveAnnotations<T>()

Removes the annotations with the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
RemoveAttribute(String, String) RemoveAttribute(String, String) RemoveAttribute(String, String)

Removes the attribute from the current element.

(Inherited from OpenXmlElement)
RemoveChild<T>(T) RemoveChild<T>(T) RemoveChild<T>(T)

Removes the specified child element from the current element's list of child elements.

(Inherited from OpenXmlElement)
RemoveNamespaceDeclaration(String) RemoveNamespaceDeclaration(String) RemoveNamespaceDeclaration(String)

Removes the namespace declaration for the specified prefix. Removes nothing if there is no prefix.

(Inherited from OpenXmlElement)
ReplaceChild<T>(OpenXmlElement, T) ReplaceChild<T>(OpenXmlElement, T) ReplaceChild<T>(OpenXmlElement, T)

Replaces a child element with another child element in the current element's list of child elements.

(Inherited from OpenXmlElement)
SetAttribute(OpenXmlAttribute) SetAttribute(OpenXmlAttribute) SetAttribute(OpenXmlAttribute)

Sets an attribute to the specified element. If the attribute is a known attribute, the value of the attribute is set. If the attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list.

(Inherited from OpenXmlElement)
SetAttributes(IEnumerable<OpenXmlAttribute>) SetAttributes(IEnumerable<OpenXmlAttribute>) SetAttributes(IEnumerable<OpenXmlAttribute>)

Sets a number of attributes to the element. If an attribute is a known attribute, the value of the attribute is set. If an attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list.

(Inherited from OpenXmlElement)
WriteTo(XmlWriter) WriteTo(XmlWriter) WriteTo(XmlWriter)

Saves the current node to the specified XmlWriter.

(Inherited from OpenXmlElement)

Explicit Interface Implementations

IEnumerable.GetEnumerator() IEnumerable.GetEnumerator() IEnumerable.GetEnumerator() Inherited from OpenXmlElement

Applies to