UseWord97LineBreakRules UseWord97LineBreakRules UseWord97LineBreakRules Class

Definition

Emulate Word 97 East Asian Line Breaking. When the object is serialized out as xml, its qualified name is w:useWord97LineBreakRules.

public class UseWord97LineBreakRules : DocumentFormat.OpenXml.Wordprocessing.OnOffType
type UseWord97LineBreakRules = class
    inherit OnOffType
Public Class UseWord97LineBreakRules
Inherits OnOffType
Inheritance

Remarks

[ISO/IEC 29500-1 1st Edition]

9.7.3.55 useWord97LineBreakRules (Use Incorrect Inter-Character Spacing Rules)

This element specifies that applications should perform specific calculations (detailed below) when determining inter-character spacing under certain conditions. These calculations would not normally be considered correct.

Typically, the behaviors specified by the following elements are applied unconditionally:

  • The autoSpaceDE (Part 1, §17.3.1.2) and autoSpaceDN (Part 1, §17.3.1.3) elements

  • The topLinePunct (Part 1, §17.3.1.43) element

The compatibility element described in this subclause, when present with a val attribute value of true (or equivalent), specifies that applications should ignore the settings listed above in the following scenarios:

If an ideographic character and a non-ideographic/numeric character are logically adjacent (ignoring all content which is not within a t element), but separated by a field boundary, i.e.:

The first character is within a fldSimple element, but the second is not.

The characters are separated by a fldChar element with a fldCharType attribute value of end

Then any appropriate inter-character spacing should be omitted. [Note: Inter-character spacing should still be calculated correctly within the field result. end note]

If a full-width punctuation character appears at the start of a paragraph which also specifies numbering via the numPr element (Part 1, §17.3.1.19), the compression specified by the topLinePunct element is ignored.

[Example: Consider a paragraph which contains a field ending in an ideograph and another paragraph, with numbering, which contains a full-width punctuation character in the first character position:

<w:p>  
  <w:r>  
    <w:fldChar w:fldCharType="begin" />  
  </w:r>  
  …  
  <w:r>  
    <w:t>  
日</w:t>  
  </w:r>  
  <w:r>  
    <w:fldChar w:fldCharType="end" />  
  </w:r>  
  <w:r>  
    <w:t>  
1</w:t>  
  </w:r>  
</w:p>  
<w:p>  
  <w:pPr>  
    <w:numPr>  
      …  
    </w:numPr>  
  </w:pPr>  
  <w:r>  
    <w:t>  
(</w:t>  
  </w:r>  
</w:p>  

Typically, if both the autoSpaceDN and topLinePunct are true, additional spacing is added after the ideograph in the first paragraph and punctuation kerning is applied in the second paragraph (with gridlines added for visual reference):

dc08d1da-9885-483d-8b28-6b6c416d9d06

If this compatibility setting is turned on:

<w:compat>  
  <w:useWord97LineBreakRules />  
</w:compat>  

Then applications should not add any inter-character spacing at th end of the field and should turn off punctuation kerning in the second paragraph:

0dc33978-b8a8-482c-ac37-00458bbd5bed

end example]

Parent Elements
compat (Part 1, §17.15.1.21)

This element’s content model is defined by the common boolean property definition in Part 1, §17.17.4.

� ISO/IEC29500: 2008.

Constructors

UseWord97LineBreakRules() UseWord97LineBreakRules() UseWord97LineBreakRules()

Initializes a new instance of the UseWord97LineBreakRules class.

Properties

ChildElements ChildElements ChildElements

Gets all the child nodes of the current element.

(Inherited from OpenXmlElement)
ExtendedAttributes ExtendedAttributes ExtendedAttributes

Gets all extended attributes (attributes not defined in the schema) of the current element.

(Inherited from OpenXmlElement)
FirstChild FirstChild FirstChild

Gets the first child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element.

(Inherited from OpenXmlElement)
HasAttributes HasAttributes HasAttributes

Gets a boolean value that indicates whether the current element has any attributes.

(Inherited from OpenXmlElement)
HasChildren HasChildren HasChildren

Gets a value that indicates whether the current element has any child elements.

(Inherited from OpenXmlLeafElement)
InnerText InnerText InnerText

Gets the concatenated values of the node and all of its children.

(Inherited from OpenXmlElement)
InnerXml InnerXml InnerXml

Gets or sets the markup that only represents child elements of the current element.

(Inherited from OpenXmlLeafElement)
LastChild LastChild LastChild

Gets the last child of the OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no such OpenXmlElement element.

(Inherited from OpenXmlElement)
LocalName LocalName LocalName

Gets the local name of the element.

MCAttributes MCAttributes MCAttributes

Sets the markup compatibility attributes. Returns null if no markup compatibility attributes are defined for the current element.

(Inherited from OpenXmlElement)
NamespaceDeclarations NamespaceDeclarations NamespaceDeclarations

Gets all the namespace declarations defined in the current element. Returns an empty enumerator if there is no namespace declaration.

(Inherited from OpenXmlElement)
NamespaceUri NamespaceUri NamespaceUri

Gets the namespace URI of the current element.

(Inherited from OpenXmlElement)
OpenXmlElementContext OpenXmlElementContext OpenXmlElementContext

Gets the OpenXmlEementContext of the current element.

(Inherited from OpenXmlElement)
OuterXml OuterXml OuterXml

Gets the markup that represents the current element and all of its child elements.

(Inherited from OpenXmlElement)
Parent Parent Parent

Gets the parent element of the current element.

(Inherited from OpenXmlElement)
Prefix Prefix Prefix

Gets the namespace prefix of current element.

(Inherited from OpenXmlElement)
Val Val Val

On/Off Value.Represents the following attribute in the schema: w:val

(Inherited from OnOffType)
XmlQualifiedName XmlQualifiedName XmlQualifiedName

Gets the qualified name of the current element.

(Inherited from OpenXmlElement)
XName XName XName

Gets the qualified name of the current element.

(Inherited from OpenXmlElement)

Methods

AddAnnotation(Object) AddAnnotation(Object) AddAnnotation(Object)

Adds an object to the current OpenXmlElement element's list of annotations.

(Inherited from OpenXmlElement)
AddNamespaceDeclaration(String, String) AddNamespaceDeclaration(String, String) AddNamespaceDeclaration(String, String)

Adds a namepace declaration to the current node.

(Inherited from OpenXmlElement)
Ancestors() Ancestors() Ancestors()

Enumerates all of the current element's ancestors.

(Inherited from OpenXmlElement)
Ancestors<T>() Ancestors<T>() Ancestors<T>()

Enumerates only the current element's ancestors that have the specified type.

(Inherited from OpenXmlElement)
Annotation(Type) Annotation(Type) Annotation(Type)

Get the first annotation object of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotation<T>() Annotation<T>() Annotation<T>()

Get the first annotation object of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotations(Type) Annotations(Type) Annotations(Type)

Gets a collection of annotations with the specified type for the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Annotations<T>() Annotations<T>() Annotations<T>()

Gets a collection of annotations with the specified type for the current OpenXmlElement element.

(Inherited from OpenXmlElement)
Append(IEnumerable<OpenXmlElement>) Append(IEnumerable<OpenXmlElement>) Append(IEnumerable<OpenXmlElement>)

Appends each element from a list of elements to the end of the current element's list of child elements.

(Inherited from OpenXmlElement)
Append(OpenXmlElement[]) Append(OpenXmlElement[]) Append(OpenXmlElement[])

Appends each element from an array of elements to the end of the current element's list of child elements.

(Inherited from OpenXmlElement)
AppendChild<T>(T) AppendChild<T>(T) AppendChild<T>(T)

Appends the specified element to the end of the current element's list of child nodes.

(Inherited from OpenXmlElement)
ClearAllAttributes() ClearAllAttributes() ClearAllAttributes()

Clears all of the attributes, including both known attributes and extended attributes.

(Inherited from OpenXmlElement)
Clone() Clone() Clone()

Creates a duplicate of the current node.

(Inherited from OpenXmlElement)
CloneNode(Boolean) CloneNode(Boolean) CloneNode(Boolean)

Creates a duplicate of this node.

Descendants() Descendants() Descendants()

Enumerates all of the current element's descendants.

(Inherited from OpenXmlElement)
Descendants<T>() Descendants<T>() Descendants<T>()

Enumerate all of the current element's descendants of type T.

(Inherited from OpenXmlElement)
Elements() Elements() Elements()

Enumerates all of the current element's children.

(Inherited from OpenXmlElement)
Elements<T>() Elements<T>() Elements<T>()

Enumerates only the current element's children that have the specified type.

(Inherited from OpenXmlElement)
ElementsAfter() ElementsAfter() ElementsAfter()

Enumerates all of the sibling elements that follow the current element and have the same parent as the current element.

(Inherited from OpenXmlElement)
ElementsBefore() ElementsBefore() ElementsBefore()

Enumerates all of the sibling elements that precede the current element and have the same parent as the current element.

(Inherited from OpenXmlElement)
GetAttribute(String, String) GetAttribute(String, String) GetAttribute(String, String)

Gets an Open XML attribute with the specified tag name and namespace URI.

(Inherited from OpenXmlElement)
GetAttributes() GetAttributes() GetAttributes()

Gets a list that contains a copy of all the attributes.

(Inherited from OpenXmlElement)
GetEnumerator() GetEnumerator() GetEnumerator()

Returns an enumerator that iterates through the child collection.

(Inherited from OpenXmlElement)
GetFirstChild<T>() GetFirstChild<T>() GetFirstChild<T>()

Finds the first child element in type T.

(Inherited from OpenXmlElement)
InsertAfter<T>(T, OpenXmlElement) InsertAfter<T>(T, OpenXmlElement) InsertAfter<T>(T, OpenXmlElement)

Inserts the specified element immediately after the specified reference element.

(Inherited from OpenXmlElement)
InsertAfterSelf<T>(T) InsertAfterSelf<T>(T) InsertAfterSelf<T>(T)

Inserts the specified element immediately after the current element.

(Inherited from OpenXmlElement)
InsertAt<T>(T, Int32) InsertAt<T>(T, Int32) InsertAt<T>(T, Int32)

Inserts the specified element at the specified index in the current element's list of child elements.

(Inherited from OpenXmlElement)
InsertBefore<T>(T, OpenXmlElement) InsertBefore<T>(T, OpenXmlElement) InsertBefore<T>(T, OpenXmlElement)

Inserts the specified element immediately before the specified reference element.

(Inherited from OpenXmlElement)
InsertBeforeSelf<T>(T) InsertBeforeSelf<T>(T) InsertBeforeSelf<T>(T)

Inserts the specified element immediately before the current element.

(Inherited from OpenXmlElement)
IsAfter(OpenXmlElement) IsAfter(OpenXmlElement) IsAfter(OpenXmlElement)

Determines if the current element appears after a specified element in document order.

(Inherited from OpenXmlElement)
IsBefore(OpenXmlElement) IsBefore(OpenXmlElement) IsBefore(OpenXmlElement)

Determines if the current element appears before a specified element in document order.

(Inherited from OpenXmlElement)
LookupNamespace(String) LookupNamespace(String) LookupNamespace(String)

Resolves the namespace prefix in the context of the current node.

(Inherited from OpenXmlElement)
LookupPrefix(String) LookupPrefix(String) LookupPrefix(String)

Finds the corresponding prefix for a namespace uri in the current element scope.

(Inherited from OpenXmlElement)
NextSibling() NextSibling() NextSibling()

Gets the OpenXmlElement element that immediately follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement element.

(Inherited from OpenXmlElement)
NextSibling<T>() NextSibling<T>() NextSibling<T>()

Gets the OpenXmlElement element with the specified type that follows the current OpenXmlElement element. Returns null (Nothing in Visual Basic) if there is no next OpenXmlElement.

(Inherited from OpenXmlElement)
PrependChild<T>(T) PrependChild<T>(T) PrependChild<T>(T)

Inserts the specified element at the beginning of the current element's list of child elements.

(Inherited from OpenXmlElement)
PreviousSibling() PreviousSibling() PreviousSibling()

Gets the OpenXmlElement element that immediately precedes the current OpenXmlElement element. Returns null (Nothing in Visual Basic ) if there is no preceding OpenXmlElement element.

(Inherited from OpenXmlElement)
PreviousSibling<T>() PreviousSibling<T>() PreviousSibling<T>()

Gets the OpenXmlElement element with the specified type that precedes the current OpenXmlElement. Returns null (Nothing in Visual Basic) if there is no preceding OpenXmlElement element.

(Inherited from OpenXmlElement)
Remove() Remove() Remove()

Removes the current element from its parent.

(Inherited from OpenXmlElement)
RemoveAllChildren() RemoveAllChildren() RemoveAllChildren()

Removes all child elements of the current element.

(Inherited from OpenXmlLeafElement)
RemoveAllChildren<T>() RemoveAllChildren<T>() RemoveAllChildren<T>()

Remove all of the current element's child elements that are of type T.

(Inherited from OpenXmlElement)
RemoveAnnotations(Type) RemoveAnnotations(Type) RemoveAnnotations(Type)

Removes the annotations of the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
RemoveAnnotations<T>() RemoveAnnotations<T>() RemoveAnnotations<T>()

Removes the annotations with the specified type from the current OpenXmlElement element.

(Inherited from OpenXmlElement)
RemoveAttribute(String, String) RemoveAttribute(String, String) RemoveAttribute(String, String)

Removes the attribute from the current element.

(Inherited from OpenXmlElement)
RemoveChild<T>(T) RemoveChild<T>(T) RemoveChild<T>(T)

Removes the specified child element from the current element's list of child elements.

(Inherited from OpenXmlElement)
RemoveNamespaceDeclaration(String) RemoveNamespaceDeclaration(String) RemoveNamespaceDeclaration(String)

Removes the namespace declaration for the specified prefix. Removes nothing if there is no prefix.

(Inherited from OpenXmlElement)
ReplaceChild<T>(OpenXmlElement, T) ReplaceChild<T>(OpenXmlElement, T) ReplaceChild<T>(OpenXmlElement, T)

Replaces a child element with another child element in the current element's list of child elements.

(Inherited from OpenXmlElement)
SetAttribute(OpenXmlAttribute) SetAttribute(OpenXmlAttribute) SetAttribute(OpenXmlAttribute)

Sets an attribute to the specified element. If the attribute is a known attribute, the value of the attribute is set. If the attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list.

(Inherited from OpenXmlElement)
SetAttributes(IEnumerable<OpenXmlAttribute>) SetAttributes(IEnumerable<OpenXmlAttribute>) SetAttributes(IEnumerable<OpenXmlAttribute>)

Sets a number of attributes to the element. If an attribute is a known attribute, the value of the attribute is set. If an attribute is an extended attribute, the 'openxmlAttribute' is added to the extended attributes list.

(Inherited from OpenXmlElement)
WriteTo(XmlWriter) WriteTo(XmlWriter) WriteTo(XmlWriter)

Saves the current node to the specified XmlWriter.

(Inherited from OpenXmlElement)

Explicit Interface Implementations

IEnumerable.GetEnumerator() IEnumerable.GetEnumerator() IEnumerable.GetEnumerator() Inherited from OpenXmlElement

Applies to