IConventionProperty Interface

Definition

Represents a scalar property of an entity type.

This interface is used during model creation and allows the metadata to be modified. Once the model is built, IProperty represents a read-only view of the same metadata.

public interface IConventionProperty : Microsoft.EntityFrameworkCore.Metadata.IConventionPropertyBase, Microsoft.EntityFrameworkCore.Metadata.IProperty
public interface IConventionProperty : Microsoft.EntityFrameworkCore.Metadata.IConventionPropertyBase, Microsoft.EntityFrameworkCore.Metadata.IReadOnlyProperty
type IConventionProperty = interface
    interface IProperty
    interface IPropertyBase
    interface IAnnotatable
    interface IConventionPropertyBase
    interface IConventionAnnotatable
type IConventionProperty = interface
    interface IReadOnlyProperty
    interface IReadOnlyPropertyBase
    interface IReadOnlyAnnotatable
    interface IConventionPropertyBase
    interface IConventionAnnotatable
Public Interface IConventionProperty
Implements IConventionPropertyBase, IProperty
Public Interface IConventionProperty
Implements IConventionPropertyBase, IReadOnlyProperty
Implements

Remarks

See Model building conventions for more information.

Properties

AfterSaveBehavior

Gets a value indicating whether or not this property can be modified after the entity is saved to the database.

If Throw, then an exception will be thrown if a new value is assigned to this property after the entity exists in the database.

If Ignore, then any modification to the property value of an entity that already exists in the database will be ignored.

(Inherited from IProperty)
BeforeSaveBehavior

Gets a value indicating whether or not this property can be modified before the entity is saved to the database.

If Throw, then an exception will be thrown if a value is assigned to this property when it is in the Added state.

If Ignore, then any value set will be ignored when it is in the Added state.

(Inherited from IProperty)
Builder

Gets the builder that can be used to configure this property.

ClrType

Gets the type of value that this property-like object holds.

(Inherited from IReadOnlyPropertyBase)
DeclaringEntityType

Gets the type that this property belongs to.

DeclaringType

Gets the type that this property-like object belongs to.

(Inherited from IReadOnlyPropertyBase)
FieldInfo

Gets the FieldInfo for the underlying CLR field for this property-like object. This may be null for shadow properties or if the backing field is not known.

(Inherited from IReadOnlyPropertyBase)
IsConcurrencyToken

Gets a value indicating whether this property is used as a concurrency token. When a property is configured as a concurrency token the value in the database will be checked when an instance of this entity type is updated or deleted during SaveChanges() to ensure it has not changed since the instance was retrieved from the database. If it has changed, an exception will be thrown and the changes will not be applied to the database.

(Inherited from IReadOnlyProperty)
IsInModel

Indicates whether this object is in a model, i.e. hasn't been removed from one.

(Inherited from IConventionAnnotatable)
IsNullable

Gets a value indicating whether this property can contain null.

(Inherited from IReadOnlyProperty)
IsReadOnlyAfterSave
Obsolete.

This property is obsolete. Use BeforeSaveBehavior instead.

(Inherited from IProperty)
IsReadOnlyBeforeSave
Obsolete.

This property is obsolete. Use BeforeSaveBehavior instead.

(Inherited from IProperty)
IsStoreGeneratedAlways
Obsolete.

This property is obsolete. Use BeforeSaveBehavior or AfterSaveBehavior instead.

(Inherited from IProperty)
Item[String]

Gets the value of the annotation with the given name, returning null if it does not exist.

(Inherited from IReadOnlyAnnotatable)
Name

Gets the name of this property-like object.

(Inherited from IReadOnlyPropertyBase)
PropertyInfo

Gets the PropertyInfo for the underlying CLR property for this property-like object. This may be null for shadow properties or if mapped directly to a field.

(Inherited from IReadOnlyPropertyBase)
RequiresValueGenerator

Gets a value indicating whether this property requires a ValueGenerator to generate values when new entities are added to the context.

(Inherited from IProperty)
ValueGenerated

Gets a value indicating when a value for this property will be generated by the database. Even when the property is set to be generated by the database, EF may still attempt to save a specific value (rather than having one generated by the database) when the entity is added and a value is assigned, or the property is marked as modified for an existing entity. See GetBeforeSaveBehavior() and GetAfterSaveBehavior() for more information.

(Inherited from IReadOnlyProperty)

Methods

AddAnnotation(String, Object, Boolean)

Adds an annotation to this object. Throws if an annotation with the specified name already exists.

(Inherited from IConventionAnnotatable)
AddAnnotations(IEnumerable<IConventionAnnotation>, Boolean)

Adds annotations to an object.

(Inherited from IConventionAnnotatable)
AddRuntimeAnnotation(String, Object)

Adds a runtime annotation to this object. Throws if an annotation with the specified name already exists.

(Inherited from IAnnotatable)
AnnotationsToDebugString(Int32)

Gets the debug string for all annotations declared on the object.

(Inherited from IReadOnlyAnnotatable)
CreateKeyEqualityComparer<TProperty>()

Creates an IEqualityComparer<T> for values of the given property type.

(Inherited from IProperty)
FindAnnotation(String)

Gets the annotation with the given name, returning null if it does not exist.

(Inherited from IReadOnlyAnnotatable)
FindContainingPrimaryKey()

Gets the primary key that uses this property (including a composite primary key in which this property is included).

FindFirstPrincipal()

Finds the first principal property that the given property is constrained by if the given property is part of a foreign key.

FindRuntimeAnnotation(String)

Gets the runtime annotation with the given name, returning null if it does not exist.

(Inherited from IAnnotatable)
FindRuntimeAnnotationValue(String)

Gets the value of the runtime annotation with the given name, returning null if it does not exist.

(Inherited from IAnnotatable)
FindTypeMapping()

Returns the type mapping for this property.

(Inherited from IReadOnlyProperty)
GetAfterSaveBehavior()

Gets a value indicating whether or not this property can be modified after the entity is saved to the database.

If Throw, then an exception will be thrown if a new value is assigned to this property after the entity exists in the database.

If Ignore, then any modification to the property value of an entity that already exists in the database will be ignored.

(Inherited from IReadOnlyProperty)
GetAfterSaveBehaviorConfigurationSource()

Returns the configuration source for GetAfterSaveBehavior().

GetAnnotation(String)

Gets the annotation with the given name, throwing if it does not exist.

(Inherited from IReadOnlyAnnotatable)
GetAnnotations()

Gets all annotations on the current object.

(Inherited from IReadOnlyAnnotatable)
GetBeforeSaveBehavior()

Gets a value indicating whether or not this property can be modified before the entity is saved to the database.

If Throw, then an exception will be thrown if a value is assigned to this property when it is in the Added state.

If Ignore, then any value set will be ignored when it is in the Added state.

(Inherited from IReadOnlyProperty)
GetBeforeSaveBehaviorConfigurationSource()

Returns the configuration source for GetBeforeSaveBehavior().

GetConfigurationSource()

Returns the configuration source for this property.

GetContainingForeignKeys()

Gets all foreign keys that use this property (including composite foreign keys in which this property is included).

GetContainingIndexes()

Gets all indexes that use this property (including composite indexes in which this property is included).

GetContainingKeys()

Gets all primary or alternate keys that use this property (including composite keys in which this property is included).

GetCurrentValueComparer()

Gets a IComparer<T> for comparing values in tracked IUpdateEntry entries.

(Inherited from IPropertyBase)
GetFieldInfoConfigurationSource()

Returns the configuration source for FieldInfo.

(Inherited from IConventionPropertyBase)
GetFieldName()

Gets the name of the backing field for this property, or null if the backing field is not known.

(Inherited from IReadOnlyPropertyBase)
GetGetter()

Gets a IClrPropertyGetter for reading the value of this property.

Note that it is an error to call this method for a shadow property (IsShadowProperty()) since such a property has no associated MemberInfo.

(Inherited from IPropertyBase)
GetIndex()

Gets the property index for this property.

(Inherited from IPropertyBase)
GetIsConcurrencyTokenConfigurationSource()

Returns the configuration source for IsConcurrencyToken.

GetIsNullableConfigurationSource()

Returns the configuration source for IsNullable.

GetIsUnicodeConfigurationSource()

Returns the configuration source for IsUnicode().

GetKeyValueComparer()

Gets the ValueComparer to use with keys for this property, or null if none is set.

(Inherited from IReadOnlyProperty)
GetMaxLength()

Gets the maximum length of data that is allowed in this property. For example, if the property is a String then this is the maximum number of characters.

(Inherited from IReadOnlyProperty)
GetMaxLengthConfigurationSource()

Returns the configuration source for GetMaxLength().

GetMemberInfo(Boolean, Boolean)

Gets the PropertyInfo or FieldInfo that should be used to get or set a value for the given property.

Note that it is an error to call this method for a shadow property (IsShadowProperty()) since such a property has no associated MemberInfo.

(Inherited from IPropertyBase)
GetOrAddRuntimeAnnotationValue<TValue,TArg>(String, Func<TArg,TValue>, TArg)

Gets the value of the runtime annotation with the given name, adding it if one does not exist.

(Inherited from IAnnotatable)
GetPrecision()

Gets the precision of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of digits.

(Inherited from IReadOnlyProperty)
GetPrecisionConfigurationSource()

Returns the configuration source for GetPrecision().

GetPrincipals()

Finds the list of principal properties including the given property that the given property is constrained by if the given property is part of a foreign key.

GetPropertyAccessMode()

Gets the PropertyAccessMode being used for this property-like object.

(Inherited from IReadOnlyPropertyBase)
GetPropertyAccessModeConfigurationSource()

Returns the configuration source for GetPropertyAccessMode().

(Inherited from IConventionPropertyBase)
GetProviderClrType()

Gets the type that the property value will be converted to before being sent to the database provider.

(Inherited from IReadOnlyProperty)
GetProviderClrTypeConfigurationSource()

Returns the configuration source for GetProviderClrType().

GetRuntimeAnnotations()

Gets all the runtime annotations on the current object.

(Inherited from IAnnotatable)
GetScale()

Gets the scale of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of decimal places.

(Inherited from IReadOnlyProperty)
GetScaleConfigurationSource()

Returns the configuration source for GetScale().

GetTypeConfigurationSource()

Returns the configuration source for ClrType.

GetTypeMapping()

Returns the CoreTypeMapping for the given property from a finalized model.

(Inherited from IReadOnlyProperty)
GetTypeMappingConfigurationSource()

Gets the ConfigurationSource for CoreTypeMapping of the property.

GetValueComparer()

Gets the ValueComparer for this property, or null if none is set.

(Inherited from IReadOnlyProperty)
GetValueComparerConfigurationSource()

Returns the configuration source for GetValueComparer().

GetValueConverter()

Gets the custom ValueConverter set for this property.

(Inherited from IReadOnlyProperty)
GetValueConverterConfigurationSource()

Returns the configuration source for GetValueConverter().

GetValueGeneratedConfigurationSource()

Returns the configuration source for ValueGenerated.

GetValueGeneratorFactory()

Gets the factory that has been set to generate values for this property, if any.

(Inherited from IReadOnlyProperty)
GetValueGeneratorFactoryConfigurationSource()

Returns the configuration source for GetValueGeneratorFactory().

IsForeignKey()

Gets a value indicating whether this property is used as a foreign key (or part of a composite foreign key).

(Inherited from IReadOnlyProperty)
IsImplicitlyCreated()

Returns a value indicating whether the property was created implicitly and isn't based on the CLR model.

IsIndex()

Gets a value indicating whether this property is used as an index (or part of a composite index).

(Inherited from IReadOnlyProperty)
IsIndexerProperty()

Gets a value indicating whether this is an indexer property. An indexer property is one that is accessed through an indexer on the entity class.

(Inherited from IReadOnlyPropertyBase)
IsKey()

Gets a value indicating whether this property is used as the primary key or alternate key (or part of a composite primary or alternate key).

(Inherited from IReadOnlyProperty)
IsPrimaryKey()

Gets a value indicating whether this property is used as the primary key (or part of a composite primary key).

(Inherited from IReadOnlyProperty)
IsShadowProperty()

Gets a value indicating whether this is a shadow property. A shadow property is one that does not have a corresponding property in the entity class. The current value for the property is stored in the ChangeTracker rather than being stored in instances of the entity class.

(Inherited from IReadOnlyPropertyBase)
IsUnicode()

Gets a value indicating whether or not the property can persist Unicode characters.

(Inherited from IReadOnlyProperty)
IsUniqueIndex()

Gets a value indicating whether this property is used as a unique index (or part of a unique composite index).

(Inherited from IReadOnlyProperty)
RemoveAnnotation(String)

Removes the annotation with the given name from this object.

(Inherited from IConventionAnnotatable)
RemoveRuntimeAnnotation(String)

Removes the given runtime annotation from this object.

(Inherited from IAnnotatable)
SetAfterSaveBehavior(Nullable<PropertySaveBehavior>, Boolean)

Sets a value indicating whether this property can be modified after the entity is saved to the database.

If Throw, then an exception will be thrown if a new value is assigned to this property after the entity exists in the database.

If Ignore, then any modification to the property value of an entity that already exists in the database will be ignored.

SetAnnotation(String, Object, Boolean)

Sets the annotation stored under the given name. Overwrites the existing annotation if an annotation with the specified name already exists.

(Inherited from IConventionAnnotatable)
SetBeforeSaveBehavior(Nullable<PropertySaveBehavior>, Boolean)

Sets a value indicating whether this property can be modified before the entity is saved to the database.

If Throw, then an exception will be thrown if a value is assigned to this property when it is in the Added state.

If Ignore, then any value set will be ignored when it is in the Added state.

SetField(FieldInfo, Boolean)
Obsolete.

Sets the FieldInfo for the underlying CLR field that this property should use.

By default, the backing field, if one is found or has been specified, is used when new objects are constructed, typically when entities are queried from the database. Properties are used for all other accesses. This can be changed by calling SetPropertyAccessMode(Nullable<PropertyAccessMode>, Boolean).

(Inherited from IConventionPropertyBase)
SetField(String, Boolean)

Sets the underlying CLR field that this property should use. This may be null for shadow properties or if the backing field for the property is not known.

Backing fields are normally found by convention as described here: http://go.microsoft.com/fwlink/?LinkId=723277. This method is useful for setting backing fields explicitly in cases where the correct field is not found by convention.

By default, the backing field, if one is found or has been specified, is used when new objects are constructed, typically when entities are queried from the database. Properties are used for all other accesses. This can be changed by calling SetPropertyAccessMode(Nullable<PropertyAccessMode>, Boolean).

(Inherited from IConventionPropertyBase)
SetFieldInfo(FieldInfo, Boolean)

Sets the FieldInfo for the underlying CLR field that this property should use.

By default, the backing field, if one is found or has been specified, is used when new objects are constructed, typically when entities are queried from the database. Properties are used for all other accesses. This can be changed by calling SetPropertyAccessMode(Nullable<PropertyAccessMode>, Boolean).

(Inherited from IConventionPropertyBase)
SetIsConcurrencyToken(Nullable<Boolean>, Boolean)

Sets a value indicating whether this property is used as a concurrency token. When a property is configured as a concurrency token the value in the database will be checked when an instance of this entity type is updated or deleted during SaveChanges() to ensure it has not changed since the instance was retrieved from the database. If it has changed, an exception will be thrown and the changes will not be applied to the database.

SetIsNullable(Nullable<Boolean>, Boolean)

Sets a value indicating whether this property can contain null.

SetIsUnicode(Nullable<Boolean>, Boolean)

Sets a value indicating whether this property can persist Unicode characters.

SetMaxLength(Nullable<Int32>, Boolean)

Sets the maximum length of data that is allowed in this property. For example, if the property is a String ' then this is the maximum number of characters.

SetOrRemoveAnnotation(String, Object, Boolean)

Sets the annotation stored under the given name. Overwrites the existing annotation if an annotation with the specified name already exists. Removes the existing annotation if null is supplied.

(Inherited from IConventionAnnotatable)
SetPrecision(Nullable<Int32>, Boolean)

Sets the precision of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of digits.

SetPropertyAccessMode(Nullable<PropertyAccessMode>, Boolean)

Sets the PropertyAccessMode to use for this property.

(Inherited from IConventionPropertyBase)
SetProviderClrType(Type, Boolean)

Sets the type that the property value will be converted to before being sent to the database provider.

SetRuntimeAnnotation(String, Object)

Sets the runtime annotation stored under the given key. Overwrites the existing annotation if an annotation with the specified name already exists.

(Inherited from IAnnotatable)
SetScale(Nullable<Int32>, Boolean)

Sets the scale of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of decimal places.

SetTypeMapping(CoreTypeMapping, Boolean)

Sets the CoreTypeMapping for the given property

SetValueComparer(Type, Boolean)

Sets the custom ValueComparer for this property.

SetValueComparer(ValueComparer, Boolean)

Sets the custom ValueComparer for this property.

SetValueConverter(Type, Boolean)

Sets the custom ValueConverter for this property.

SetValueConverter(ValueConverter, Boolean)

Sets the custom ValueConverter for this property.

SetValueGenerated(Nullable<ValueGenerated>, Boolean)

Sets a value indicating when a value for this property will be generated by the database. Even when the property is set to be generated by the database, EF may still attempt to save a specific value (rather than having one generated by the database) when the entity is added and a value is assigned, or the property is marked as modified for an existing entity. See GetBeforeSaveBehavior() and GetAfterSaveBehavior() for more information.

SetValueGeneratorFactory(Func<IProperty,IEntityType,ValueGenerator>, Boolean)

Sets the factory to use for generating values for this property, or null to clear any previously set factory.

Setting null does not disable value generation for this property, it just clears any generator explicitly configured for this property. The database provider may still have a value generator for the property type.

SetValueGeneratorFactory(Type, Boolean)

Sets the factory to use for generating values for this property, or null to clear any previously set factory.

Setting null does not disable value generation for this property, it just clears any generator explicitly configured for this property. The database provider may still have a value generator for the property type.

ToDebugString(MetadataDebugStringOptions, Int32)

Creates a human-readable representation of the given metadata.

Warning: Do not rely on the format of the returned string. It is designed for debugging only and may change arbitrarily between releases.

(Inherited from IReadOnlyProperty)

Explicit Interface Implementations

IPropertyBase.GetPropertyAccessMode()

Gets the PropertyAccessMode being used for this property. null indicates that the default property access mode is being used.

(Inherited from IProperty)

Extension Methods

AddAnnotations(IConventionAnnotatable, IEnumerable<IConventionAnnotation>, Boolean)

Adds annotations to an object.

GetAnnotation(IConventionAnnotatable, String)

Gets the annotation with the given name, throwing if it does not exist.

SetOrRemoveAnnotation(IConventionAnnotatable, String, Object, Boolean)

Sets the annotation stored under the given name. Overwrites the existing annotation if an annotation with the specified name already exists. Removes the existing annotation if null is supplied.

GetPropertyAccessModeConfigurationSource(IConventionPropertyBase)

Returns the configuration source for GetPropertyAccessMode().

SetField(IConventionPropertyBase, String, Boolean)

Sets the underlying CLR field that this property should use. This may be null for shadow properties or if the backing field for the property is not known.

Backing fields are normally found by convention as described here: http://go.microsoft.com/fwlink/?LinkId=723277. This method is useful for setting backing fields explicitly in cases where the correct field is not found by convention.

By default, the backing field, if one is found or has been specified, is used when new objects are constructed, typically when entities are queried from the database. Properties are used for all other accesses. This can be changed by calling SetPropertyAccessMode(IConventionPropertyBase, Nullable<PropertyAccessMode>, Boolean).

SetPropertyAccessMode(IConventionPropertyBase, Nullable<PropertyAccessMode>, Boolean)

Sets the PropertyAccessMode to use for this property.

FindContainingPrimaryKey(IConventionProperty)

Gets the primary key that uses this property (including a composite primary key in which this property is included).

FindFirstPrincipal(IConventionProperty)

Finds the first principal property that the given property is constrained by if the given property is part of a foreign key.

FindPrincipals(IConventionProperty)
Obsolete.

Finds the list of principal properties including the given property that the given property is constrained by if the given property is part of a foreign key.

GetAfterSaveBehaviorConfigurationSource(IConventionProperty)

Returns the configuration source for GetAfterSaveBehavior(IProperty).

GetBeforeSaveBehaviorConfigurationSource(IConventionProperty)

Returns the configuration source for GetBeforeSaveBehavior(IProperty).

GetContainingForeignKeys(IConventionProperty)

Gets all foreign keys that use this property (including composite foreign keys in which this property is included).

GetContainingIndexes(IConventionProperty)

Gets all indexes that use this property (including composite indexes in which this property is included).

GetContainingKeys(IConventionProperty)

Gets all primary or alternate keys that use this property (including composite keys in which this property is included).

GetIsUnicodeConfigurationSource(IConventionProperty)

Returns the configuration source for IsUnicode(IProperty).

GetKeyValueComparerConfigurationSource(IConventionProperty)
Obsolete.

Returns the configuration source for GetKeyValueComparer().

GetMaxLengthConfigurationSource(IConventionProperty)

Returns the configuration source for GetMaxLength(IProperty).

GetPrecisionConfigurationSource(IConventionProperty)

Returns the configuration source for GetPrecision(IProperty).

GetProviderClrTypeConfigurationSource(IConventionProperty)

Returns the configuration source for GetProviderClrType(IProperty).

GetScaleConfigurationSource(IConventionProperty)

Returns the configuration source for GetScale(IProperty).

GetStructuralValueComparerConfigurationSource(IConventionProperty)
Obsolete.

Returns the configuration source for GetStructuralValueComparer(IProperty).

GetTypeMappingConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for FindTypeMapping(IProperty).

GetValueComparerConfigurationSource(IConventionProperty)

Returns the configuration source for GetValueComparer(IProperty).

GetValueConverterConfigurationSource(IConventionProperty)

Returns the configuration source for GetValueConverter(IProperty).

GetValueGeneratorFactoryConfigurationSource(IConventionProperty)

Returns the configuration source for GetValueGeneratorFactory(IProperty).

SetAfterSaveBehavior(IConventionProperty, Nullable<PropertySaveBehavior>, Boolean)

Sets a value indicating whether this property can be modified after the entity is saved to the database.

If Throw, then an exception will be thrown if a new value is assigned to this property after the entity exists in the database.

If Ignore, then any modification to the property value of an entity that already exists in the database will be ignored.

SetBeforeSaveBehavior(IConventionProperty, Nullable<PropertySaveBehavior>, Boolean)

Sets a value indicating whether this property can be modified before the entity is saved to the database.

If Throw, then an exception will be thrown if a value is assigned to this property when it is in the Added state.

If Ignore, then any value set will be ignored when it is in the Added state.

SetIsUnicode(IConventionProperty, Nullable<Boolean>, Boolean)

Sets a value indicating whether this property can persist Unicode characters.

SetKeyValueComparer(IConventionProperty, ValueComparer, Boolean)
Obsolete.

Sets the custom ValueComparer for this property when performing key comparisons.

SetMaxLength(IConventionProperty, Nullable<Int32>, Boolean)

Sets the maximum length of data that is allowed in this property. For example, if the property is a String ' then this is the maximum number of characters.

SetPrecision(IConventionProperty, Nullable<Int32>, Boolean)

Sets the precision of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of digits.

SetProviderClrType(IConventionProperty, Type, Boolean)

Sets the type that the property value will be converted to before being sent to the database provider.

SetScale(IConventionProperty, Nullable<Int32>, Boolean)

Sets the scale of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of decimal places.

SetStructuralValueComparer(IConventionProperty, ValueComparer, Boolean)
Obsolete.

Sets the custom ValueComparer for structural copies for this property.

SetTypeMapping(IConventionProperty, CoreTypeMapping, Boolean)

Sets the CoreTypeMapping for the given property

SetValueComparer(IConventionProperty, ValueComparer, Boolean)

Sets the custom ValueComparer for this property.

SetValueConverter(IConventionProperty, ValueConverter, Boolean)

Sets the custom ValueConverter for this property.

SetValueGeneratorFactory(IConventionProperty, Func<IProperty,IEntityType,ValueGenerator>, Boolean)

Sets the factory to use for generating values for this property, or null to clear any previously set factory.

Setting null does not disable value generation for this property, it just clears any generator explicitly configured for this property. The database provider may still have a value generator for the property type.

GetJsonPropertyName(IProperty)

Returns the property name that the property is mapped to when targeting Cosmos.

GetJsonPropertyName(IReadOnlyProperty)

Returns the property name that the property is mapped to when targeting Cosmos.

GetJsonPropertyNameConfigurationSource(IConventionProperty)

Gets the ConfigurationSource the property name that the property is mapped to when targeting Cosmos.

GetPropertyName(IProperty)

Returns the property name used when targeting Cosmos.

GetPropertyNameConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for the property name used when targeting Cosmos.

SetJsonPropertyName(IConventionProperty, String, Boolean)

Sets the property name that the property is mapped to when targeting Cosmos.

SetPropertyName(IConventionProperty, String, Boolean)

Sets the property name used when targeting Cosmos.

AnnotationsToDebugString(IAnnotatable, Int32)

Gets the debug string for all annotations declared on the object.

GetAnnotation(IAnnotatable, String)

Gets the annotation with the given name, throwing if it does not exist.

GetCurrentValueComparer(IPropertyBase)

Gets a IComparer<T> for comparing values in tracked IUpdateEntry entries.

GetFieldName(IPropertyBase)

Gets the name of the backing field for this property, or null if the backing field is not known.

GetGetter(IPropertyBase)

Gets a IClrPropertyGetter for reading the value of this property.

Note that it is an error to call this method for a shadow property (IsShadowProperty(IPropertyBase)) since such a property has no associated MemberInfo.

GetIndex(IPropertyBase)

Gets the property index for this property.

GetMemberInfo(IPropertyBase, Boolean, Boolean)

Gets the PropertyInfo or FieldInfo that should be used to get or set a value for the given property.

Note that it is an error to call this method for a shadow property (IsShadowProperty(IPropertyBase)) since such a property has no associated MemberInfo.

GetPropertyAccessMode(IPropertyBase)

Gets the PropertyAccessMode being used for this property. null indicates that the default property access mode is being used.

IsIndexerProperty(IPropertyBase)

Gets a value indicating whether this is an indexer property. An indexer property is one that is accessed through an indexer on the entity class.

IsShadowProperty(IPropertyBase)
Obsolete.

Gets a value indicating whether this is a shadow property. A shadow property is one that does not have a corresponding property in the entity class. The current value for the property is stored in the ChangeTracker rather than being stored in instances of the entity class.

CreateKeyEqualityComparer<TProperty>(IProperty)

Creates an IEqualityComparer<T> for values of the given property type.

FindContainingPrimaryKey(IProperty)

Gets the primary key that uses this property (including a composite primary key in which this property is included).

FindFirstPrincipal(IProperty)

Finds the first principal property that the given property is constrained by if the given property is part of a foreign key.

FindMapping(IProperty)
Obsolete.

Returns the CoreTypeMapping for the given property.

FindPrincipals(IProperty)
Obsolete.

Finds the list of principal properties including the given property that the given property is constrained by if the given property is part of a foreign key.

FindTypeMapping(IProperty)

Returns the CoreTypeMapping for the given property.

GetAfterSaveBehavior(IProperty)
Obsolete.

Gets a value indicating whether or not this property can be modified after the entity is saved to the database.

If Throw, then an exception will be thrown if a new value is assigned to this property after the entity exists in the database.

If Ignore, then any modification to the property value of an entity that already exists in the database will be ignored.

GetBeforeSaveBehavior(IProperty)
Obsolete.

Gets a value indicating whether or not this property can be modified before the entity is saved to the database.

If Throw, then an exception will be thrown if a value is assigned to this property when it is in the Added state.

If Ignore, then any value set will be ignored when it is in the Added state.

GetContainingForeignKeys(IProperty)

Gets all foreign keys that use this property (including composite foreign keys in which this property is included).

GetContainingIndexes(IProperty)

Gets all indexes that use this property (including composite indexes in which this property is included).

GetContainingKeys(IProperty)

Gets all primary or alternate keys that use this property (including composite keys in which this property is included).

GetContainingPrimaryKey(IProperty)
Obsolete.

Gets the primary key that uses this property (including a composite primary key in which this property is included).

GetKeyValueComparer(IProperty)

Gets the ValueComparer to use with keys for this property, or null if none is set.

GetMaxLength(IProperty)

Gets the maximum length of data that is allowed in this property. For example, if the property is a String then this is the maximum number of characters.

GetPrecision(IProperty)

Gets the precision of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of digits.

GetProviderClrType(IProperty)

Gets the type that the property value will be converted to before being sent to the database provider.

GetScale(IProperty)

Gets the scale of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of decimal places.

GetStructuralValueComparer(IProperty)
Obsolete.

Gets the ValueComparer to use for structural copies for this property, or null if none is set.

GetTypeMapping(IProperty)

Returns the CoreTypeMapping for the given property from a finalized model.

GetValueComparer(IProperty)

Gets the ValueComparer for this property, or null if none is set.

GetValueConverter(IProperty)
Obsolete.

Gets the custom ValueConverter set for this property.

GetValueGeneratorFactory(IProperty)
Obsolete.

Gets the factory that has been set to generate values for this property, if any.

IsForeignKey(IProperty)
Obsolete.

Gets a value indicating whether this property is used as a foreign key (or part of a composite foreign key).

IsIndex(IProperty)
Obsolete.

Gets a value indicating whether this property is used as an index (or part of a composite index).

IsKey(IProperty)
Obsolete.

Gets a value indicating whether this property is used as the primary key or alternate key (or part of a composite primary or alternate key).

IsPrimaryKey(IProperty)
Obsolete.

Gets a value indicating whether this property is used as the primary key (or part of a composite primary key).

IsUnicode(IProperty)

Gets a value indicating whether or not the property can persist Unicode characters.

IsUniqueIndex(IProperty)
Obsolete.

Gets a value indicating whether this property is used as a unique index (or part of a unique composite index).

ToDebugString(IProperty, MetadataDebugStringOptions, Int32)

Creates a human-readable representation of the given metadata.

Warning: Do not rely on the format of the returned string. It is designed for debugging only and may change arbitrarily between releases.

FindColumn(IProperty, StoreObjectIdentifier)

Returns the column corresponding to this property if it's mapped to the given table-like store object.

FindOverrides(IConventionProperty, StoreObjectIdentifier)

Returns the property facet overrides for a particular table-like store object.

This method is typically used by database providers (and other extensions). It is generally not used in application code.

FindOverrides(IProperty, StoreObjectIdentifier)

Returns the property facet overrides for a particular table-like store object.

This method is typically used by database providers (and other extensions). It is generally not used in application code.

FindOverrides(IReadOnlyProperty, StoreObjectIdentifier)

Returns the property facet overrides for a particular table-like store object.

This method is typically used by database providers (and other extensions). It is generally not used in application code.

FindRelationalMapping(IProperty)
Obsolete.

Returns the RelationalTypeMapping for the given property on a finalized model.

FindRelationalTypeMapping(IProperty)

Returns the RelationalTypeMapping for the given property on a finalized model.

FindRelationalTypeMapping(IProperty, StoreObjectIdentifier)

Returns the RelationalTypeMapping for the given property on a finalized model.

FindRelationalTypeMapping(IReadOnlyProperty)

Returns the RelationalTypeMapping for the given property on a finalized model.

FindRelationalTypeMapping(IReadOnlyProperty, StoreObjectIdentifier)

Returns the RelationalTypeMapping for the given property on a finalized model.

FindSharedStoreObjectRootProperty(IConventionProperty, StoreObjectIdentifier)

Finds the first IProperty that is mapped to the same column in a shared table-like object.

This method is typically used by database providers (and other extensions). It is generally not used in application code.

FindSharedStoreObjectRootProperty(IProperty, StoreObjectIdentifier)

Finds the first IProperty that is mapped to the same column in a shared table-like object.

This method is typically used by database providers (and other extensions). It is generally not used in application code.

FindSharedStoreObjectRootProperty(IReadOnlyProperty, StoreObjectIdentifier)

Finds the first IProperty that is mapped to the same column in a shared table-like object.

This method is typically used by database providers (and other extensions). It is generally not used in application code.

FindSharedTableRootPrimaryKeyProperty(IProperty)

Finds the IProperty that represents the same primary key property as the given property, but potentially in a shared root table.

This type is typically used by database providers (and other extensions). It is generally not used in application code.

GetCollation(IProperty)

Returns the collation to be used for the column.

GetCollation(IProperty, StoreObjectIdentifier)

Returns the collation to be used for the column.

GetCollation(IReadOnlyProperty)

Returns the collation to be used for the column.

GetCollation(IReadOnlyProperty, StoreObjectIdentifier)

Returns the collation to be used for the column.

GetCollationConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for the column collation.

GetColumnBaseName(IProperty)

Returns the base name of the column to which the property would be mapped.

GetColumnBaseName(IReadOnlyProperty)

Returns the base name of the column to which the property would be mapped.

GetColumnName(IProperty)
Obsolete.

Returns the name of the table column to which the property is mapped.

GetColumnName(IProperty, StoreObjectIdentifier)

Returns the name of the column to which the property is mapped for a particular table.

GetColumnName(IReadOnlyProperty, StoreObjectIdentifier)

Returns the name of the column to which the property is mapped for a particular table.

GetColumnNameConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for the column name.

GetColumnNameConfigurationSource(IConventionProperty, StoreObjectIdentifier)

Gets the ConfigurationSource for the column name for a particular table-like store object.

GetColumnOrder(IReadOnlyProperty)

Returns the order of the column this property is mapped to.

GetColumnOrder(IReadOnlyProperty, StoreObjectIdentifier)

Returns the order of the column this property is mapped to for a particular table.

GetColumnOrderConfigurationSource(IConventionProperty)

Gets the ConfigurationSource of the column order.

GetColumnType(IProperty)

Returns the database type of the column to which the property is mapped.

GetColumnType(IProperty, StoreObjectIdentifier)

Returns the database type of the column to which the property is mapped.

GetColumnType(IReadOnlyProperty)

Returns the database type of the column to which the property is mapped, or null if the database type could not be found.

GetColumnType(IReadOnlyProperty, StoreObjectIdentifier)

Returns the database type of the column to which the property is mapped, or null if the database type could not be found.

GetColumnTypeConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for the column name.

GetComment(IProperty)

Returns the comment for the column this property is mapped to.

GetComment(IProperty, StoreObjectIdentifier)

Returns the comment for the column this property is mapped to.

GetComment(IReadOnlyProperty)

Returns the comment for the column this property is mapped to.

GetComment(IReadOnlyProperty, StoreObjectIdentifier)

Returns the comment for the column this property is mapped to.

GetCommentConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for the column comment.

GetComputedColumnSql(IProperty)

Returns the SQL expression that is used as the computed value for the column this property is mapped to.

GetComputedColumnSql(IProperty, StoreObjectIdentifier)

Returns the SQL expression that is used as the computed value for the column this property is mapped to.

GetComputedColumnSql(IReadOnlyProperty)

Returns the SQL expression that is used as the computed value for the column this property is mapped to.

GetComputedColumnSql(IReadOnlyProperty, StoreObjectIdentifier)

Returns the SQL expression that is used as the computed value for the column this property is mapped to.

GetComputedColumnSqlConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for the computed value SQL expression.

GetDefaultColumnBaseName(IProperty)

Returns the default base name of the column to which the property would be mapped

GetDefaultColumnBaseName(IReadOnlyProperty)

Returns the default base name of the column to which the property would be mapped

GetDefaultColumnMappings(IProperty)

Returns the default columns to which the property would be mapped.

GetDefaultColumnName(IProperty)
Obsolete.

Returns the default table column name to which the property would be mapped.

GetDefaultColumnName(IProperty, StoreObjectIdentifier)

Returns the default column name to which the property would be mapped.

GetDefaultColumnName(IReadOnlyProperty, StoreObjectIdentifier)

Returns the default column name to which the property would be mapped.

GetDefaultValue(IProperty)

Returns the object that is used as the default value for the column this property is mapped to.

GetDefaultValue(IProperty, StoreObjectIdentifier)

Returns the object that is used as the default value for the column this property is mapped to.

GetDefaultValue(IReadOnlyProperty)

Returns the object that is used as the default value for the column this property is mapped to.

GetDefaultValue(IReadOnlyProperty, StoreObjectIdentifier)

Returns the object that is used as the default value for the column this property is mapped to.

GetDefaultValueConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for the default value.

GetDefaultValueSql(IProperty)

Returns the SQL expression that is used as the default value for the column this property is mapped to.

GetDefaultValueSql(IProperty, StoreObjectIdentifier)

Returns the SQL expression that is used as the default value for the column this property is mapped to.

GetDefaultValueSql(IReadOnlyProperty)

Returns the SQL expression that is used as the default value for the column this property is mapped to.

GetDefaultValueSql(IReadOnlyProperty, StoreObjectIdentifier)

Returns the SQL expression that is used as the default value for the column this property is mapped to.

GetDefaultValueSqlConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for the default value SQL expression.

GetFunctionColumnMappings(IProperty)

Returns the function columns to which the property is mapped.

GetIsFixedLengthConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for IsFixedLength(IReadOnlyProperty).

GetIsStored(IProperty)

Gets whether the value of the computed column this property is mapped to is stored in the database, or calculated when it is read.

GetIsStored(IProperty, StoreObjectIdentifier)

Gets whether the value of the computed column this property is mapped to is stored in the database, or calculated when it is read.

GetIsStored(IReadOnlyProperty)

Gets whether the value of the computed column this property is mapped to is stored in the database, or calculated when it is read.

GetIsStored(IReadOnlyProperty, StoreObjectIdentifier)

Gets whether the value of the computed column this property is mapped to is stored in the database, or calculated when it is read.

GetIsStoredConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for the computed value SQL expression.

GetMaxLength(IProperty, StoreObjectIdentifier)

Gets the maximum length of data that is allowed in this property. For example, if the property is a String then this is the maximum number of characters.

GetMaxLength(IReadOnlyProperty, StoreObjectIdentifier)

Gets the maximum length of data that is allowed in this property. For example, if the property is a String then this is the maximum number of characters.

GetOrCreateOverrides(IConventionProperty, StoreObjectIdentifier)

Returns the property facet overrides for a particular table-like store object.

This method is typically used by database providers (and other extensions). It is generally not used in application code.

GetPrecision(IProperty, StoreObjectIdentifier)

Gets the precision of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of digits.

GetPrecision(IReadOnlyProperty, StoreObjectIdentifier)

Gets the precision of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of digits.

GetRelationalTypeMapping(IProperty)

Returns the RelationalTypeMapping for the given property on a finalized model.

GetRelationalTypeMapping(IReadOnlyProperty)

Returns the RelationalTypeMapping for the given property on a finalized model.

GetScale(IProperty, StoreObjectIdentifier)

Gets the scale of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of decimal places.

GetScale(IReadOnlyProperty, StoreObjectIdentifier)

Gets the scale of data that is allowed in this property. For example, if the property is a Decimal then this is the maximum number of decimal places.

GetSqlQueryColumnMappings(IProperty)

Returns the SQL query columns to which the property is mapped.

GetTableColumnMappings(IProperty)

Returns the table columns to which the property is mapped.

GetViewColumnMappings(IProperty)

Returns the view columns to which the property is mapped.

IsColumnNullable(IProperty)

Checks whether the column mapped to the given IProperty will be nullable when created in the database.

This depends on the property itself and also how it is mapped. For example, derived non-nullable properties in a TPH type hierarchy will be mapped to nullable columns. As well as properties on optional types sharing the same table.

IsColumnNullable(IProperty, StoreObjectIdentifier)

Checks whether the column mapped to the given IProperty will be nullable when created in the database.

This depends on the property itself and also how it is mapped. For example, derived non-nullable properties in a TPH type hierarchy will be mapped to nullable columns. As well as properties on optional types sharing the same table.

IsColumnNullable(IReadOnlyProperty)

Checks whether the column mapped to the given IProperty will be nullable when created in the database.

This depends on the property itself and also how it is mapped. For example, derived non-nullable properties in a TPH type hierarchy will be mapped to nullable columns. As well as properties on optional types sharing the same table.

IsColumnNullable(IReadOnlyProperty, StoreObjectIdentifier)

Checks whether the column mapped to the given property will be nullable when created in the database.

This depends on the property itself and also how it is mapped. For example, derived non-nullable properties in a TPH type hierarchy will be mapped to nullable columns. As well as properties on optional types sharing the same table.

IsFixedLength(IProperty)

Returns a flag indicating if the property as capable of storing only fixed-length data, such as strings.

IsFixedLength(IProperty, StoreObjectIdentifier)

Returns a flag indicating if the property as capable of storing only fixed-length data, such as strings.

IsFixedLength(IReadOnlyProperty)

Returns a flag indicating whether the property is capable of storing only fixed-length data, such as strings.

IsFixedLength(IReadOnlyProperty, StoreObjectIdentifier)

Returns a flag indicating whether the property is capable of storing only fixed-length data, such as strings.

IsUnicode(IProperty, StoreObjectIdentifier)

Gets a value indicating whether or not the property can persist Unicode characters.

IsUnicode(IReadOnlyProperty, StoreObjectIdentifier)

Gets a value indicating whether or not the property can persist Unicode characters.

SetCollation(IConventionProperty, String, Boolean)

Configures a collation to be used for the column this property is mapped to.

SetColumnName(IConventionProperty, String, StoreObjectIdentifier, Boolean)

Sets the column to which the property is mapped for a particular table-like store object.

SetColumnName(IConventionProperty, String, Boolean)

Sets the column to which the property is mapped.

SetColumnOrder(IConventionProperty, Nullable<Int32>, Boolean)

Sets the order of the column the property is mapped to.

SetColumnType(IConventionProperty, String, Boolean)

Sets the database type of the column to which the property is mapped.

SetComment(IConventionProperty, String, Boolean)

Configures a comment to be applied to the column this property is mapped to.

SetComputedColumnSql(IConventionProperty, String, Boolean)

Sets the SQL expression that is used as the computed value for the column this property is mapped to.

SetDefaultValue(IConventionProperty, Object, Boolean)

Sets the object that is used as the default value for the column this property is mapped to.

SetDefaultValueSql(IConventionProperty, String, Boolean)

Sets the SQL expression that is used as the default value for the column this property is mapped to.

SetIsFixedLength(IConventionProperty, Nullable<Boolean>, Boolean)

Sets a flag indicating whether the property is capable of storing only fixed-length data, such as strings.

SetIsStored(IConventionProperty, Nullable<Boolean>, Boolean)

Sets whether the value of the computed column this property is mapped to is stored in the database, or calculated when it is read.

TryGetDefaultValue(IReadOnlyProperty, StoreObjectIdentifier, Object)

Returns the object that is used as the default value for the column this property is mapped to.

TryGetDefaultValue(IReadOnlyProperty, Object)

Returns the object that is used as the default value for the column this property is mapped to.

GetGeometricDimension(IProperty)

Returns the dimension to use when creating a column for this property.

GetGeometricDimensionConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for the column dimension.

GetSrid(IProperty)

Returns the SRID to use when creating a column for this property.

GetSrid(IProperty, StoreObjectIdentifier)

Returns the SRID to use when creating a column for this property.

GetSrid(IReadOnlyProperty)

Returns the SRID to use when creating a column for this property.

GetSrid(IReadOnlyProperty, StoreObjectIdentifier)

Returns the SRID to use when creating a column for this property.

GetSridConfigurationSource(IConventionProperty)

Gets the ConfigurationSource for the column SRID.

SetGeometricDimension(IConventionProperty, String, Boolean)

Sets the dimension to use when creating a column for this property.

SetSrid(IConventionProperty, Nullable<Int32>, Boolean)

Sets the SRID to use when creating a column for this property.

FindHiLoSequence(IProperty)

Finds the ISequence in the model to use for the hi-lo pattern.

FindHiLoSequence(IProperty, StoreObjectIdentifier)

Finds the ISequence in the model to use for the hi-lo pattern.

FindHiLoSequence(IReadOnlyProperty)

Finds the ISequence in the model to use for the hi-lo pattern.

FindHiLoSequence(IReadOnlyProperty, StoreObjectIdentifier)

Finds the ISequence in the model to use for the hi-lo pattern.

GetHiLoSequenceName(IProperty)

Returns the name to use for the hi-lo sequence.

GetHiLoSequenceName(IProperty, StoreObjectIdentifier)

Returns the name to use for the hi-lo sequence.

GetHiLoSequenceName(IReadOnlyProperty)

Returns the name to use for the hi-lo sequence.

GetHiLoSequenceName(IReadOnlyProperty, StoreObjectIdentifier)

Returns the name to use for the hi-lo sequence.

GetHiLoSequenceNameConfigurationSource(IConventionProperty)

Returns the ConfigurationSource for the hi-lo sequence name.

GetHiLoSequenceSchema(IProperty)

Returns the schema to use for the hi-lo sequence.

GetHiLoSequenceSchema(IProperty, StoreObjectIdentifier)

Returns the schema to use for the hi-lo sequence.

GetHiLoSequenceSchema(IReadOnlyProperty)

Returns the schema to use for the hi-lo sequence.

GetHiLoSequenceSchema(IReadOnlyProperty, StoreObjectIdentifier)

Returns the schema to use for the hi-lo sequence.

GetHiLoSequenceSchemaConfigurationSource(IConventionProperty)

Returns the ConfigurationSource for the hi-lo sequence schema.

GetIdentityIncrement(IProperty)

Returns the identity increment.

GetIdentityIncrement(IProperty, StoreObjectIdentifier)

Returns the identity increment.

GetIdentityIncrement(IReadOnlyProperty)

Returns the identity increment.

GetIdentityIncrement(IReadOnlyProperty, StoreObjectIdentifier)

Returns the identity increment.

GetIdentityIncrementConfigurationSource(IConventionProperty)

Returns the ConfigurationSource for the identity increment.

GetIdentitySeed(IProperty)

Returns the identity seed.

GetIdentitySeed(IProperty, StoreObjectIdentifier)

Returns the identity seed.

GetIdentitySeed(IReadOnlyProperty)

Returns the identity seed.

GetIdentitySeed(IReadOnlyProperty, StoreObjectIdentifier)

Returns the identity seed.

GetIdentitySeedConfigurationSource(IConventionProperty)

Returns the ConfigurationSource for the identity seed.

GetIsSparseConfigurationSource(IConventionProperty)

Returns the ConfigurationSource for whether the property's column is sparse.

GetValueGenerationStrategy(IProperty)

Returns the SqlServerValueGenerationStrategy to use for the property.

If no strategy is set for the property, then the strategy to use will be taken from the IModel.

GetValueGenerationStrategy(IProperty, StoreObjectIdentifier)

Returns the SqlServerValueGenerationStrategy to use for the property.

If no strategy is set for the property, then the strategy to use will be taken from the IModel.

GetValueGenerationStrategy(IReadOnlyProperty)

Returns the SqlServerValueGenerationStrategy to use for the property.

If no strategy is set for the property, then the strategy to use will be taken from the IModel.

GetValueGenerationStrategy(IReadOnlyProperty, StoreObjectIdentifier)

Returns the SqlServerValueGenerationStrategy to use for the property.

If no strategy is set for the property, then the strategy to use will be taken from the IModel.

GetValueGenerationStrategyConfigurationSource(IConventionProperty)

Returns the ConfigurationSource for the SqlServerValueGenerationStrategy.

IsSparse(IReadOnlyProperty)

Returns a value indicating whether the property's column is sparse.

IsSparse(IReadOnlyProperty, StoreObjectIdentifier)

Returns a value indicating whether the property's column is sparse.

SetHiLoSequenceName(IConventionProperty, String, Boolean)

Sets the name to use for the hi-lo sequence.

SetHiLoSequenceSchema(IConventionProperty, String, Boolean)

Sets the schema to use for the hi-lo sequence.

SetIdentityIncrement(IConventionProperty, Nullable<Int32>, Boolean)

Sets the identity increment.

SetIdentitySeed(IConventionProperty, Nullable<Int32>, Boolean)

Sets the identity seed.

SetIdentitySeed(IConventionProperty, Nullable<Int64>, Boolean)

Sets the identity seed.

SetIsSparse(IConventionProperty, Nullable<Boolean>, Boolean)

Sets a value indicating whether the property's column is sparse.

SetValueGenerationStrategy(IConventionProperty, Nullable<SqlServerValueGenerationStrategy>, Boolean)

Sets the SqlServerValueGenerationStrategy to use for the property.

Applies to