RestartComputerCommand RestartComputerCommand RestartComputerCommand RestartComputerCommand Class

Definition

Restarts the computer

public ref class RestartComputerCommand : System::Management::Automation::PSCmdlet, IDisposable
public class RestartComputerCommand : System.Management.Automation.PSCmdlet, IDisposable
type RestartComputerCommand = class
    inherit PSCmdlet
    interface IDisposable
Public Class RestartComputerCommand
Inherits PSCmdlet
Implements IDisposable
Inheritance
Implements

Constructors

RestartComputerCommand() RestartComputerCommand() RestartComputerCommand() RestartComputerCommand()

Properties

AsJob AsJob AsJob AsJob

Used to start a command remotely as a Job. The Job results are collected and stored in the global cache on the client machine.

CommandOrigin CommandOrigin CommandOrigin CommandOrigin

This property tells you if you were being invoked inside the runspace or if it was an external request.

(Inherited from InternalCommand)
CommandRuntime CommandRuntime CommandRuntime CommandRuntime

Holds the command runtime object for this command. This object controls what actually happens when a write is called.

(Inherited from Cmdlet)
ComputerName ComputerName ComputerName ComputerName

Specifies the computer (s)Name on which this command is executed. When this parameter is omitted, this cmdlet restarts the local computer. Type the NETBIOS name, IP address, or fully-qualified domain name of one or more computers in a comma-separated list. To specify the local computer, type the computername or "localhost".

Credential Credential Credential Credential

The following is the definition of the input parameter "Credential". Specifies a user account that has permission to perform this action. Type a user-name, such as "User01" or "Domain01\User01", or enter a PSCredential object, such as one from the Get-Credential cmdlet

CurrentPSTransaction CurrentPSTransaction CurrentPSTransaction CurrentPSTransaction

Gets an object that surfaces the current PowerShell transaction. When this object is disposed, PowerShell resets the active transaction

(Inherited from Cmdlet)
DcomAuthentication DcomAuthentication DcomAuthentication DcomAuthentication

The following is the definition of the input parameter "Authentication". Specifies the authentication level to be used with WMI connection. Valid values are:

Unchanged = -1, Default = 0, None = 1, Connect = 2, Call = 3, Packet = 4, PacketIntegrity = 5, PacketPrivacy = 6.

Delay Delay Delay Delay

Specify the Delay parameter. The specific time interval (in second) to wait between network pings or service queries.

Events Events Events Events

Gets the event manager for the current runspace.

(Inherited from PSCmdlet)
For For For For

Specify the For parameter. Wait for the specific service before unblocking the prompt.

Force Force Force Force

Using Force in conjunction with Reboot on a remote computer immediately reboots the remote computer.

Host Host Host Host

Gets the host interaction APIs.

(Inherited from PSCmdlet)
Impersonation Impersonation Impersonation Impersonation

The following is the definition of the input parameter "Impersonation". Specifies the impersonation level to use when calling the WMI method. Valid values are:

Default = 0, Anonymous = 1, Identify = 2, Impersonate = 3, Delegate = 4.

InvokeCommand InvokeCommand InvokeCommand InvokeCommand

Provides access to utility routines for executing scripts and creating script blocks.

(Inherited from PSCmdlet)
InvokeProvider InvokeProvider InvokeProvider InvokeProvider

Gets the instance of the provider interface APIs for the current runspace.

(Inherited from PSCmdlet)
JobManager JobManager JobManager JobManager

Manager for JobSourceAdapters registered.

(Inherited from PSCmdlet)
JobRepository JobRepository JobRepository JobRepository

Repostiory for jobs

(Inherited from PSCmdlet)
MyInvocation MyInvocation MyInvocation MyInvocation

Contains information about the identity of this cmdlet and how it was invoked.

(Inherited from PSCmdlet)
PagingParameters PagingParameters PagingParameters PagingParameters

If the cmdlet declares paging support (via SupportsPaging), then PagingParameters property contains arguments of the paging parameters. Otherwise PagingParameters property is null.

(Inherited from PSCmdlet)
ParameterSetName ParameterSetName ParameterSetName ParameterSetName

The name of the parameter set in effect.

(Inherited from PSCmdlet)
Protocol Protocol Protocol Protocol

Specify the protocol to use

SessionState SessionState SessionState SessionState

Gets the instance of session state for the current runspace.

(Inherited from PSCmdlet)
Stopping Stopping Stopping Stopping

Is this command stopping?

(Inherited from Cmdlet)
ThrottleLimit ThrottleLimit ThrottleLimit ThrottleLimit

Allows the user of the cmdlet to specify a throttling value for throttling the number of remote operations that can be executed simultaneously.

Timeout Timeout Timeout Timeout

Specify the Timeout parameter. Negative value indicates wait infinitely. Positive value indicates the seconds to wait before timeout.

Wait Wait Wait Wait

Specify the Wait parameter. Prompt will be blocked is the Timeout is not 0

WsmanAuthentication WsmanAuthentication WsmanAuthentication WsmanAuthentication

The authentication options for CIM_WSMan connection

Methods

BeginProcessing() BeginProcessing() BeginProcessing() BeginProcessing()

BeginProcessing method.

CurrentProviderLocation(String) CurrentProviderLocation(String) CurrentProviderLocation(String) CurrentProviderLocation(String) Inherited from PSCmdlet
Dispose() Dispose() Dispose() Dispose()

Dispose Method

Dispose(Boolean) Dispose(Boolean) Dispose(Boolean) Dispose(Boolean)

Dispose Method.

EndProcessing() EndProcessing() EndProcessing() EndProcessing()

When overridden in the derived class, performs clean-up after the command execution. Default implementation in the base class just returns.

(Inherited from Cmdlet)
GetResolvedProviderPathFromPSPath(String, ProviderInfo) GetResolvedProviderPathFromPSPath(String, ProviderInfo) GetResolvedProviderPathFromPSPath(String, ProviderInfo) GetResolvedProviderPathFromPSPath(String, ProviderInfo) Inherited from PSCmdlet
GetResourceString(String, String) GetResourceString(String, String) GetResourceString(String, String) GetResourceString(String, String)

Gets the resource string corresponding to baseName and resourceId from the current assembly. You should override this if you require a different behavior.

(Inherited from Cmdlet)
GetUnresolvedProviderPathFromPSPath(String) GetUnresolvedProviderPathFromPSPath(String) GetUnresolvedProviderPathFromPSPath(String) GetUnresolvedProviderPathFromPSPath(String) Inherited from PSCmdlet
GetVariableValue(String) GetVariableValue(String) GetVariableValue(String) GetVariableValue(String) Inherited from PSCmdlet
GetVariableValue(String, Object) GetVariableValue(String, Object) GetVariableValue(String, Object) GetVariableValue(String, Object) Inherited from PSCmdlet
Invoke() Invoke() Invoke() Invoke()

Invoke this cmdlet object returning a collection of results.

(Inherited from Cmdlet)
Invoke<T>() Invoke<T>() Invoke<T>() Invoke<T>()

Returns a strongly-typed enumerator for the results of this cmdlet.

(Inherited from Cmdlet)
ProcessRecord() ProcessRecord() ProcessRecord() ProcessRecord()

ProcessRecord method.

ShouldContinue(String, String) ShouldContinue(String, String) ShouldContinue(String, String) ShouldContinue(String, String)

Confirm an operation or grouping of operations with the user. This differs from ShouldProcess in that it is not affected by preference settings or command-line parameters, it always does the query. This variant only offers Yes/No, not YesToAll/NoToAll.

(Inherited from Cmdlet)
ShouldContinue(String, String, Boolean, Boolean) ShouldContinue(String, String, Boolean, Boolean) ShouldContinue(String, String, Boolean, Boolean) ShouldContinue(String, String, Boolean, Boolean)

Confirm an operation or grouping of operations with the user. This differs from ShouldProcess in that it is not affected by preference settings or command-line parameters, it always does the query. This variant offers Yes, No, YesToAll and NoToAll.

(Inherited from Cmdlet)
ShouldContinue(String, String, Boolean, Boolean, Boolean) ShouldContinue(String, String, Boolean, Boolean, Boolean) ShouldContinue(String, String, Boolean, Boolean, Boolean) ShouldContinue(String, String, Boolean, Boolean, Boolean)

Confirm an operation or grouping of operations with the user. This differs from ShouldProcess in that it is not affected by preference settings or command-line parameters, it always does the query. This variant offers Yes, No, YesToAll and NoToAll.

(Inherited from Cmdlet)
ShouldProcess(String) ShouldProcess(String) ShouldProcess(String) ShouldProcess(String)

Confirm the operation with the user. Cmdlets which make changes (e.g. delete files, stop services etc.) should call ShouldProcess to give the user the opportunity to confirm that the operation should actually be performed.

(Inherited from Cmdlet)
ShouldProcess(String, String) ShouldProcess(String, String) ShouldProcess(String, String) ShouldProcess(String, String)

Confirm the operation with the user. Cmdlets which make changes (e.g. delete files, stop services etc.) should call ShouldProcess to give the user the opportunity to confirm that the operation should actually be performed.

This variant allows the caller to specify text for both the target resource and the action.

(Inherited from Cmdlet)
ShouldProcess(String, String, String) ShouldProcess(String, String, String) ShouldProcess(String, String, String) ShouldProcess(String, String, String)

Confirm the operation with the user. Cmdlets which make changes (e.g. delete files, stop services etc.) should call ShouldProcess to give the user the opportunity to confirm that the operation should actually be performed.

This variant allows the caller to specify the complete text describing the operation, rather than just the name and action.

(Inherited from Cmdlet)
ShouldProcess(String, String, String, ShouldProcessReason) ShouldProcess(String, String, String, ShouldProcessReason) ShouldProcess(String, String, String, ShouldProcessReason) ShouldProcess(String, String, String, ShouldProcessReason)

Confirm the operation with the user. Cmdlets which make changes (e.g. delete files, stop services etc.) should call ShouldProcess to give the user the opportunity to confirm that the operation should actually be performed.

This variant allows the caller to specify the complete text describing the operation, rather than just the name and action.

(Inherited from Cmdlet)
StopProcessing() StopProcessing() StopProcessing() StopProcessing()

to implement ^C

ThrowTerminatingError(ErrorRecord) ThrowTerminatingError(ErrorRecord) ThrowTerminatingError(ErrorRecord) ThrowTerminatingError(ErrorRecord)

Terminate the command and report an error

(Inherited from Cmdlet)
TransactionAvailable() TransactionAvailable() TransactionAvailable() TransactionAvailable()

Returns true if a transaction is available and active.

(Inherited from Cmdlet)
WriteCommandDetail(String) WriteCommandDetail(String) WriteCommandDetail(String) WriteCommandDetail(String)

Write text into pipeline execution log.

(Inherited from Cmdlet)
WriteDebug(String) WriteDebug(String) WriteDebug(String) WriteDebug(String)

Display debug information

(Inherited from Cmdlet)
WriteError(ErrorRecord) WriteError(ErrorRecord) WriteError(ErrorRecord) WriteError(ErrorRecord)

Internal variant: Writes the specified error to the error pipe.

(Inherited from Cmdlet)
WriteInformation(InformationRecord) WriteInformation(InformationRecord) WriteInformation(InformationRecord) WriteInformation(InformationRecord)

Route information to the user or host.

(Inherited from Cmdlet)
WriteInformation(Object, String[]) WriteInformation(Object, String[]) WriteInformation(Object, String[]) WriteInformation(Object, String[])

Route information to the user or host.

(Inherited from Cmdlet)
WriteObject(Object) WriteObject(Object) WriteObject(Object) WriteObject(Object)

Writes the object to the output pipe.

(Inherited from Cmdlet)
WriteObject(Object, Boolean) WriteObject(Object, Boolean) WriteObject(Object, Boolean) WriteObject(Object, Boolean)

Writes one or more objects to the output pipe. If the object is a collection and the enumerateCollection flag is true, the objects in the collection will be written individually.

(Inherited from Cmdlet)
WriteProgress(ProgressRecord) WriteProgress(ProgressRecord) WriteProgress(ProgressRecord) WriteProgress(ProgressRecord)

Display progress information

(Inherited from Cmdlet)
WriteVerbose(String) WriteVerbose(String) WriteVerbose(String) WriteVerbose(String)

Display verbose information

(Inherited from Cmdlet)
WriteWarning(String) WriteWarning(String) WriteWarning(String) WriteWarning(String)

Display warning information

(Inherited from Cmdlet)

Applies to