2.2.2.2 TLV 2
The following are the constituents of TLV 2 of the WSHA SoH packet (section 2.2.2). All of the values MUST be present, unless otherwise noted. The values MUST be in this order. The M and R bits are defined in the Protocol Bindings for SoH [TNC-IF-TNCCSPBSoH] and are ignored by the WSHV upon receipt. All TLV 2 values are sent in network-byte order, which is big-endian, except for the Flag field which is sent in machine-byte order and is little-endian.
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
3 |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
M |
R |
TLV_Type |
Length |
||||||||||||||||||||||||||||
|
Flag |
|||||||||||||||||||||||||||||||
|
... |
|||||||||||||||||||||||||||||||
M (1 bit): The M bit MUST be set to zero.
R (1 bit): The R bit is reserved, and MUST be set to zero when sent and ignored on receipt.
TLV_Type (14 bits): A 14-bit unsigned integer that MUST be set to 7.
Length (2 bytes): A 16-bit unsigned integer in network-byte order that MUST indicate the length (8), in bytes, of the Flag field.
Flag (8 bytes): Eight bytes, as specified in section 2.2.5.