Writing a custom DSC resource with MOF

Applies To: Windows PowerShell 4.0, Windows PowerShell 5.0

In this topic, we will define the schema for a Windows PowerShell Desired State Configuration (DSC) custom resource in a MOF file, and implement the resource in a Windows PowerShell script file. This custom resource is for creating and maintaining a web site.

Creating the MOF schema

The schema defines the properties of your resource that can be configured by a DSC configuration script.

Folder structure for a MOF resource

To implement a DSC custom resource with a MOF schema, create the following folder structure. The MOF schema is defined in the file Demo_IISWebsite.schema.mof, and the resource script is defined in Demo_IISWebsite.psm1. Optionally, you can create a module manifest (psd1) file.

$env:ProgramFiles\WindowsPowerShell\Modules (folder)
    |- MyDscResources (folder)
        |- DSCResources (folder)
            |- Demo_IISWebsite (folder)
                |- Demo_IISWebsite.psd1 (file, optional)
                |- Demo_IISWebsite.psm1 (file, required)
                |- Demo_IISWebsite.schema.mof (file, required)

Note that it is necessary to create a folder named DSCResources under the top-level folder, and that the folder for each resource must have the same name as the resource.

The contents of the MOF file

Following is an example MOF file that can be used for a custom website resource. To follow this example, save this schema to a file, and call the file Demo_IISWebsite.schema.mof.

[ClassVersion("1.0.0"), FriendlyName("Website")]
class Demo_IISWebsite : OMI_BaseResource
  [Key] string Name;
  [Required] string PhysicalPath;
  [write,ValueMap{"Present", "Absent"},Values{"Present", "Absent"}] string Ensure;
  [write,ValueMap{"Started","Stopped"},Values{"Started", "Stopped"}] string State;
  [write] string Protocol[];
  [write] string BindingInfo[];
  [write] string ApplicationPool;
  [read] string ID;

Note the following about the previous code:

  • FriendlyName defines the name you can use to refer to this custom resource in DSC configuration scripts. In this example, Website is equivalent to the friendly name Archive for the built-in Archive resource.
  • The class you define for your custom resource must derive from OMI_BaseResource.
  • The type qualifier, [Key], on a property indicates that this property will uniquely identify the resource instance. At least one [Key] property is required.
  • The [Required] qualifier indicates that the property is required (a value must be specified in any configuration script that uses this resource).
  • The [write] qualifier indicates that this property is optional when using the custom resource in a configuration script. The [read] qualifier indicates that a property cannot be set by a configuration, and is for reporting purposes only.
  • Values restricts the values that can be assigned to the property to the list of values defined in ValueMap. For more information, see ValueMap and Value Qualifiers.
  • Including a property called Ensure with values Present and Absent in your resource is recommended as a way to maintain a consistent style with built-in DSC resources.
  • Name the schema file for your custom resource as follows: classname.schema.mof, where classname is the identifier that follows the class keyword in your schema definition.

Writing the resource script

The resource script implements the logic of the resource. In this module, you must include three functions called Get-TargetResource, Set-TargetResource, and Test-TargetResource. All three functions must take a parameter set that is identical to the set of properties defined in the MOF schema that you created for your resource. In this document, this set of properties is referred to as the “resource properties.” Store these three functions in a file called .psm1. In the following example, the functions are stored in a file called Demo_IISWebsite.psm1.


When you run the same configuration script on your resource more than once, you should receive no errors and the resource should remain in the same state as running the script once. To accomplish this, ensure that your Get-TargetResource and Test-TargetResource functions leave the resource unchanged, and that invoking the Set-TargetResource function more than once in a sequence with the same parameter values is always equivalent to invoking it once.

In the Get-TargetResource function implementation, use the key resource property values that are provided as parameters to check the status of the specified resource instance. This function must return a hash table that lists all the resource properties as keys and the actual values of these properties as the corresponding values. The following code provides an example.

# DSC uses the Get-TargetResource function to fetch the status of the resource instance specified in the parameters for the target machine
function Get-TargetResource
        [ValidateSet("Present", "Absent")]
        [string]$Ensure = "Present",



        [ValidateSet("Started", "Stopped")]
        [string]$State = "Started",




        $getTargetResourceResult = $null;

        <# Insert logic that uses the mandatory parameter values to get the website and assign it to a variable called $Website #>
        <# Set $ensureResult to "Present" if the requested website exists and to "Absent" otherwise #>

        # Add all Website properties to the hash table
        # This simple example assumes that $Website is not null
        $getTargetResourceResult = @{
                                      Name = $Website.Name;
                                        Ensure = $ensureResult;
                                        PhysicalPath = $Website.physicalPath;
                                        State = $Website.state;
                                        ID = $Website.id;
                                        ApplicationPool = $Website.applicationPool;
                                        Protocol = $Website.bindings.Collection.protocol;
                                        Binding = $Website.bindings.Collection.bindingInformation;


Depending on the values that are specified for the resource properties in the configuration script, the Set-TargetResource must do one of the following:

  • Create a new website
  • Update an existing website
  • Delete an existing website

The following example illustrates this.

# The Set-TargetResource function is used to create, delete or configure a website on the target machine.
function Set-TargetResource
        [ValidateSet("Present", "Absent")]
        [string]$Ensure = "Present",



        [ValidateSet("Started", "Stopped")]
        [string]$State = "Started",




    <# If Ensure is set to "Present" and the website specified in the mandatory input parameters does not exist, then create it using the specified parameter values #>
    <# Else, if Ensure is set to "Present" and the website does exist, then update its properties to match the values provided in the non-mandatory parameter values #>
    <# Else, if Ensure is set to "Absent" and the website does not exist, then do nothing #>
    <# Else, if Ensure is set to "Absent" and the website does exist, then delete the website #>

Finally, the Test-TargetResource function must take the same parameter set as Get-TargetResource and Set-TargetResource. In your implementation of Test-TargetResource, check the status of the resource instance that is specified in the key parameters. If the actual status of the resource instance does not match the values specified in the parameter set, return $false. Otherwise, return $true.

The following code implements the Test-TargetResource function.

function Test-TargetResource

[parameter(Mandatory = $true)]

[parameter(Mandatory = $true)]





#Write-Verbose "Use this cmdlet to deliver information about command processing."

#Write-Debug "Use this cmdlet to write debug information while troubleshooting."

#Include logic to
$result = [System.Boolean]
#Add logic to test whether the website is present and its status mathes the supplied parameter values. If it does, return true. If it does not, return false.

Note: For easier debugging, use the Write-Verbose cmdlet in your implementation of the previous three functions.

This cmdlet writes text to the verbose message stream. By default, the verbose message stream is not displayed, but you can display it by changing the value of the $VerbosePreference variable or by using the Verbose parameter in the DSC cmdlets = new.

Creating the module manifest

Finally, use the New-ModuleManifest cmdlet to define a .psd1 file for your custom resource module. When you invoke this cmdlet, reference the script module (.psm1) file described in the previous section. Include Get-TargetResource, Set-TargetResource, and Test-TargetResource in the list of functions to export. Following is an example manifest file.

# Module manifest for module 'Demo.IIS.Website'
# Generated on: 1/10/2013


# Script module or binary module file associated with this manifest.
# RootModule = ''

# Version number of this module.
ModuleVersion = '1.0'

# ID used to uniquely identify this module
GUID = '6AB5ED33-E923-41d8-A3A4-5ADDA2B301DE'

# Author of this module
Author = 'Contoso'

# Company or vendor of this module
CompanyName = 'Contoso'

# Copyright statement for this module
Copyright = 'Contoso. All rights reserved.'

# Description of the functionality provided by this module
Description = 'This Module is used to support the creation and configuration of IIS Websites through Get, Set and Test API on the DSC managed nodes.'

# Minimum version of the Windows PowerShell engine required by this module
PowerShellVersion = '4.0'

# Minimum version of the common language runtime (CLR) required by this module
CLRVersion = '4.0'

# Modules that must be imported into the global environment prior to importing this module
RequiredModules = @("WebAdministration")

# Modules to import as nested modules of the module specified in RootModule/ModuleToProcess
NestedModules = @("Demo_IISWebsite.psm1")

# Functions to export from this module
FunctionsToExport = @("Get-TargetResource", "Set-TargetResource", "Test-TargetResource")

# Cmdlets to export from this module
#CmdletsToExport = '*'

# HelpInfo URI of this module
# HelpInfoURI = ''

Supporting PsDscRunAsCredential

Note: PsDscRunAsCredential is supported in PowerShell 5.0 and later.

The PsDscRunAsCredential property can be used in DSC configurations resource block to specify that the resource should be run under a specified set of credentials. For more information, see Running DSC with user credentials.

To access the user context from within a custom resource, you can use the automatic variable $PsDscContext.

For example the following code would write the user context under which the resource is running to the verbose output stream:

if (PsDscContext.RunAsUser) {
    Write-Verbose "User: $PsDscContext.RunAsUser";

Rebooting the Node

If the actions taken in your Set-TargetResource function require a reboot, you can use a global flag to tell the LCM to reboot the Node. This reboot occurs directly after the Set-TargetResource function completes.

Inside your Set-TargetResource function, add the following line of code.

# Include this line if the resource requires a system reboot.
$global:DSCMachineStatus = 1

In order for the LCM to reboot the Node, the RebootNodeIfNeeded flag needs to be set to $true. The ActionAfterReboot setting should also be set to ContinueConfiguration, which is the default. For more information on configuring the LCM, see Configuring the Local Configuration Manager, or Configuring the Local Configuration Manager (v4).