Az.Network

This topic displays help topics for the Azure Network Cmdlets.

Application Gateway

Add-AzApplicationGatewayAuthenticationCertificate

Adds an authentication certificate to an application gateway.

Add-AzApplicationGatewayBackendAddressPool

Adds a back-end address pool to an application gateway.

Add-AzApplicationGatewayBackendHttpSetting

Adds back-end HTTP settings to an application gateway.

Add-AzApplicationGatewayCustomError

Adds a custom error to an application gateway.

Add-AzApplicationGatewayFrontendIPConfig

Adds a front-end IP configuration to an application gateway.

Add-AzApplicationGatewayFrontendPort

Adds a front-end port to an application gateway.

Add-AzApplicationGatewayHttpListener

Adds an HTTP listener to an application gateway.

Add-AzApplicationGatewayHttpListenerCustomError

Adds a custom error to a http listener of an application gateway.

Add-AzApplicationGatewayIPConfiguration

Adds an IP configuration to an application gateway.

Add-AzApplicationGatewayProbeConfig

Adds a health probe to an Application Gateway.

Add-AzApplicationGatewayRedirectConfiguration

Adds a redirect configuration to an Application Gateway.

Add-AzApplicationGatewayRequestRoutingRule

Adds a request routing rule to an application gateway.

Add-AzApplicationGatewayRewriteRuleSet

Adds a rewrite rule set to an application gateway.

Add-AzApplicationGatewaySslCertificate

Adds an SSL certificate to an application gateway.

Add-AzApplicationGatewayTrustedRootCertificate

Adds a trusted root certificate to an application gateway.

Add-AzApplicationGatewayUrlPathMapConfig

Adds an array of URL path mappings to a backend server pool.

Get-AzApplicationGateway

Gets an application gateway.

Get-AzApplicationGatewayAuthenticationCertificate

Gets an authentication certificate for an application gateway.

Get-AzApplicationGatewayAutoscaleConfiguration

Gets the Autoscale Configuration of the Application Gateway.

Get-AzApplicationGatewayAvailableServerVariableAndHeader

Get the supported server variables and available request and response headers.

Get-AzApplicationGatewayAvailableSslOption

Gets all available ssl options for ssl policy for Application Gateway.

Get-AzApplicationGatewayAvailableWafRuleSet

Gets all available web application firewall rule sets.

Get-AzApplicationGatewayBackendAddressPool

Gets a back-end address pool for an application gateway.

Get-AzApplicationGatewayBackendHealth

Gets application gateway backend health.

Get-AzApplicationGatewayBackendHttpSetting

Gets the back-end HTTP settings of an application gateway.

Get-AzApplicationGatewayConnectionDraining

Gets the connection draining configuration of a back-end HTTP settings object.

Get-AzApplicationGatewayCustomError

Gets custom error(s) from an application gateway.

Get-AzApplicationGatewayFirewallPolicy

Gets an application gateway firewall policy.

Get-AzApplicationGatewayFrontendIPConfig

Gets the front-end IP configuration of an application gateway.

Get-AzApplicationGatewayFrontendPort

Gets the front-end port of an application gateway.

Get-AzApplicationGatewayHttpListener

Gets the HTTP listener of an application gateway.

Get-AzApplicationGatewayHttpListenerCustomError

Gets custom error(s) from a http listener of an application gateway.

Get-AzApplicationGatewayIPConfiguration

Gets the IP configuration of an application gateway.

Get-AzApplicationGatewayIdentity

Get identity assigned to the application gateway.

Get-AzApplicationGatewayProbeConfig

Gets an existing health probe configuration from an Application Gateway.

Get-AzApplicationGatewayRedirectConfiguration

Gets an existing redirect configuration from an Application Gateway.

Get-AzApplicationGatewayRequestRoutingRule

Gets the request routing rule of an application gateway.

Get-AzApplicationGatewayRewriteRuleSet

Gets the rewrite rule set of an application gateway.

Get-AzApplicationGatewaySku

Gets the SKU of an application gateway.

Get-AzApplicationGatewaySslCertificate

Gets an SSL certificate for an application gateway.

Get-AzApplicationGatewaySslPolicy

Gets the SSL policy of an application gateway.

Get-AzApplicationGatewaySslPredefinedPolicy

Gets Predefined SSL Policies provided by Application Gateway.

Get-AzApplicationGatewayTrustedRootCertificate

Gets the Trusted Root Certificate with a specific name from the Application Gateway.

Get-AzApplicationGatewayUrlPathMapConfig

Gets an array of URL path mappings to a backend server pool.

Get-AzApplicationGatewayWebApplicationFirewallConfiguration

Gets the WAF configuration of an application gateway.

New-AzApplicationGateway

Creates an application gateway.

New-AzApplicationGatewayAuthenticationCertificate

Creates an authentication certificate for an application gateway.

New-AzApplicationGatewayAutoscaleConfiguration

Creates a Autoscale Configuration for the Application Gateway.

New-AzApplicationGatewayBackendAddressPool

Creates a back-end address pool for an application gateway.

New-AzApplicationGatewayBackendHttpSetting

Creates back-end HTTP setting for an application gateway.

New-AzApplicationGatewayConnectionDraining

Creates a new connection draining configuration for back-end HTTP settings.

New-AzApplicationGatewayCustomError

Creates a custom error with http status code and custom error page url

New-AzApplicationGatewayFirewallCondition

Creates a match condition for custom rule

New-AzApplicationGatewayFirewallCustomRule

Creates a new custom rule for the application gateway firewall policy.

New-AzApplicationGatewayFirewallDisabledRuleGroupConfig

Creates a new disabled rule group configuration.

New-AzApplicationGatewayFirewallExclusionConfig

Creates a new exclusion rule list for application gateway waf

New-AzApplicationGatewayFirewallMatchVariable

Creates a match variable for firewall condition.

New-AzApplicationGatewayFirewallPolicy

Creates a application gateway firewall policy.

New-AzApplicationGatewayFirewallPolicyExclusion

Creates an exclusion on the Firewall Policy

New-AzApplicationGatewayFirewallPolicyManagedRule

Create ManagedRules for the firewall policy.

New-AzApplicationGatewayFirewallPolicyManagedRuleGroupOverride

Creates RuleGroupOverride entry in ManagedRuleSets for the firewall policy.

New-AzApplicationGatewayFirewallPolicyManagedRuleOverride

Creates a managedRuleOverride entry for RuleGroupOverrideGroup entry.

New-AzApplicationGatewayFirewallPolicyManagedRuleSet

Creates a ManagedRuleSet for the firewallPolicy

New-AzApplicationGatewayFirewallPolicySetting

Creates a policy setting for the firewall policy

New-AzApplicationGatewayFrontendIPConfig

Creates a front-end IP configuration for an application gateway.

New-AzApplicationGatewayFrontendPort

Creates a front-end port for an application gateway.

New-AzApplicationGatewayHttpListener

Creates an HTTP listener for an application gateway.

New-AzApplicationGatewayIPConfiguration

Creates an IP configuration for an application gateway.

New-AzApplicationGatewayIdentity

Creates an identity object for an application gateway. This will hold reference to the user assigned identity.

New-AzApplicationGatewayPathRuleConfig

Creates an application gateway path rule.

New-AzApplicationGatewayPathRuleConfig

Creates an application gateway path rule.

New-AzApplicationGatewayProbeHealthResponseMatch

Creates a health probe response match used by Health Probe for an application gateway.

New-AzApplicationGatewayRedirectConfiguration

Creates a redirect configuration for an application gateway.

New-AzApplicationGatewayRequestRoutingRule

Creates a request routing rule for an application gateway.

New-AzApplicationGatewayRewriteRule

Creates a rewrite rule for an application gateway.

New-AzApplicationGatewayRewriteRuleActionSet

Creates a rewrite rule action set for an application gateway.

New-AzApplicationGatewayRewriteRuleCondition

Adds a condition to the RewriteRule for an application gateway.

New-AzApplicationGatewayRewriteRuleHeaderConfiguration

Creates a rewrite rule header configuration for an application gateway.

New-AzApplicationGatewayRewriteRuleSet

Creates a request routing rule for an application gateway.

New-AzApplicationGatewaySku

Creates a SKU for an application gateway.

New-AzApplicationGatewaySslCertificate

Creates an SSL certificate for an Azure application gateway.

New-AzApplicationGatewaySslPolicy

Creates an SSL policy for an application gateway.

New-AzApplicationGatewayTrustedRootCertificate

Creates a Trusted Root Certificate for an application gateway.

New-AzApplicationGatewayUrlPathMapConfig

Creates an array of URL path mappings to a backend server pool.

New-AzApplicationGatewayWebApplicationFirewallConfiguration

Creates a WAF configuration for an application gateway.

Remove-AzApplicationGateway

Removes an application gateway.

Remove-AzApplicationGatewayAuthenticationCertificate

Removes an authentication certificate from an application gateway.

Remove-AzApplicationGatewayAutoscaleConfiguration

Removes Autoscale Configuration from an application gateway.

Remove-AzApplicationGatewayBackendAddressPool

Removes a back-end address pool from an application gateway.

Remove-AzApplicationGatewayBackendHttpSetting

Removes back-end HTTP settings from an application gateway.

Remove-AzApplicationGatewayConnectionDraining

Removes the connection draining configuration of a back-end HTTP settings object.

Remove-AzApplicationGatewayCustomError

Removes a custom error from an application gateway.

Remove-AzApplicationGatewayFirewallPolicy

Removes an application gateway firewall policy.

Remove-AzApplicationGatewayFrontendIPConfig

Removes a front-end IP configuration from an application gateway.

Remove-AzApplicationGatewayFrontendPort

Removes a front-end port from an application gateway.

Remove-AzApplicationGatewayHttpListener

Removes an HTTP listener from an application gateway.

Remove-AzApplicationGatewayHttpListenerCustomError

Removes a custom error from a http listener of an application gateway.

Remove-AzApplicationGatewayIPConfiguration

Removes an IP configuration from an application gateway.

Remove-AzApplicationGatewayIdentity

Removes a identity from an application gateway.

Remove-AzApplicationGatewayProbeConfig

Removes a health probe from an existing application gateway.

Remove-AzApplicationGatewayRedirectConfiguration

Removes a redirect configuration from an existing Application Gateway.

Remove-AzApplicationGatewayRequestRoutingRule

Removes a request routing rule from an application gateway.

Remove-AzApplicationGatewayRewriteRuleSet

Removes a rewrite rule set from an application gateway.

Remove-AzApplicationGatewaySslCertificate

Removes an SSL certificate from an Azure application gateway.

Remove-AzApplicationGatewaySslPolicy

Removes an SSL policy from an Azure application gateway.

Remove-AzApplicationGatewayTrustedRootCertificate

Removes a Trusted Root Certificate from an application gateway.

Remove-AzApplicationGatewayUrlPathMapConfig

Removes URL path mappings to a backend server pool.

Set-AzApplicationGateway

Updates an application gateway.

Set-AzApplicationGatewayAuthenticationCertificate

Updates an authentication certificate for an application gateway.

Set-AzApplicationGatewayAutoscaleConfiguration

Updates Autoscale Configuration of an application gateway.

Set-AzApplicationGatewayBackendAddressPool

Updates a back-end address pool for an application gateway.

Set-AzApplicationGatewayBackendHttpSetting

Updates back-end HTTP settings for an application gateway.

Set-AzApplicationGatewayConnectionDraining

Modifies the connection draining configuration of a back-end HTTP settings object.

Set-AzApplicationGatewayCustomError

Updates a custom error in an application gateway.

Set-AzApplicationGatewayFirewallPolicy

Updates an application gateway firewall policy.

Set-AzApplicationGatewayFrontendIPConfig

Modifies a front-end IP address configuration.

Set-AzApplicationGatewayFrontendPort

Modifies a front-end port for an application gateway.

Set-AzApplicationGatewayHttpListener

Modifies an HTTP listener for an application gateway.

Set-AzApplicationGatewayHttpListenerCustomError

Updates a custom error in a http listener of an application gateway.

Set-AzApplicationGatewayIPConfiguration

Modifies an IP configuration for an application gateway.

Set-AzApplicationGatewayIdentity

Updates a identity assigned to the application gateway.

Set-AzApplicationGatewayProbeConfig

Sets the health probe configuration on an existing Application Gateway.

Set-AzApplicationGatewayRedirectConfiguration

Sets the redirect configuration on an existing Application Gateway.

Set-AzApplicationGatewayRequestRoutingRule

Modifies a request routing rule for an application gateway.

Set-AzApplicationGatewayRewriteRuleSet

Modifies a rewrite rule set for an application gateway.

Set-AzApplicationGatewaySku

Modifies the SKU of an application gateway.

Set-AzApplicationGatewaySslCertificate

Updates an SSL certificate for an application gateway.

Set-AzApplicationGatewaySslPolicy

Modifies the SSL policy of an application gateway.

Set-AzApplicationGatewayTrustedRootCertificate

Updates a Trusted Root Certificate of an application gateway.

Set-AzApplicationGatewayUrlPathMapConfig

Sets configuration for an array of URL path mappings to a backend server pool.

Set-AzApplicationGatewayWebApplicationFirewallConfiguration

Modifies the WAF configuration of an application gateway.

Start-AzApplicationGateway

Starts an application gateway.

Stop-AzApplicationGateway

Stops an application gateway

DNS

Test-AzDnsAvailability

Checks whether a domain name in the cloudapp.azure.com zone is available for use.

ExpressRoute

Add-AzExpressRouteCircuitAuthorization

Adds an ExpressRoute circuit authorization.

Add-AzExpressRouteCircuitConnectionConfig

Adds a circuit connection configuration to Private Peering of an Express Route Circuit.

Add-AzExpressRouteCircuitPeeringConfig

Adds a peering configuration to an ExpressRoute circuit.

Add-AzExpressRouteCrossConnectionPeering

Adds a peering configuration to an ExpressRoute cross connection.

Get-AzExpressRouteCircuit

Gets an Azure ExpressRoute circuit from Azure.

Get-AzExpressRouteCircuitARPTable

Gets the ARP table from an ExpressRoute circuit.

Get-AzExpressRouteCircuitAuthorization

Gets information about ExpressRoute circuit authorizations.

Get-AzExpressRouteCircuitConnectionConfig

Gets an ExpressRoute circuit connection configuration associated with Private Peering of ExpressRouteCircuit.

Get-AzExpressRouteCircuitPeeringConfig

Gets an ExpressRoute circuit peering configuration.

Get-AzExpressRouteCircuitRouteTable

Gets a route table from an ExpressRoute circuit.

Get-AzExpressRouteCircuitRouteTableSummary

Gets a route table summary of an ExpressRoute circuit.

Get-AzExpressRouteCircuitStat

Gets usage statistics of an ExpressRoute circuit.

Get-AzExpressRouteConnection

Gets a ExpressRoute connection by name or lists all ExpressRoute connections connected to a ExpressRouteGateway.

Get-AzExpressRouteCrossConnection

Gets an Azure ExpressRoute cross connection from Azure.

Get-AzExpressRouteCrossConnectionArpTable

Gets the ARP table from an ExpressRoute cross connection.

Get-AzExpressRouteCrossConnectionPeering

Gets an ExpressRoute cross connection peering configuration.

Get-AzExpressRouteCrossConnectionRouteTable

Gets a route table from an ExpressRoute cross connection.

Get-AzExpressRouteCrossConnectionRouteTableSummary

Gets a route table summary of an ExpressRoute cross connection.

Get-AzExpressRouteGateway

Gets a ExpressRouteGateway resource using ResourceGroupName and GatewayName OR lists all gateways by ResourceGroupName or SubscriptionId.

Get-AzExpressRoutePort

Gets an Azure ExpressRoutePort resource.

Get-AzExpressRoutePortIdentity

Get identity assigned to an ExpressRoutePort.

Get-AzExpressRoutePortLinkConfig

Gets an ExpressRoutePort link configuration.

Get-AzExpressRoutePortsLocation

Gets the locations at which ExpressRoutePort resources are available.

Get-AzExpressRouteServiceProvider

Gets a list ExpressRoute service providers and their attributes.

Move-AzExpressRouteCircuit

Moves an ExpressRoute circuit from the classic deployment model to the Resource Manager deployment model.

New-AzExpressRouteCircuit

Creates an Azure express route circuit.

New-AzExpressRouteCircuitAuthorization

Creates an ExpressRoute circuit authorization.

New-AzExpressRouteCircuitPeeringConfig

Creates a new peering configuration to be added to an ExpressRoute circuit.

New-AzExpressRouteConnection

Creates an ExpressRoute connection that connects an ExpressRoute gateway to an on premise ExpressRoute circuit

New-AzExpressRouteGateway

Creates a Scalable ExpressRoute Gateway.

New-AzExpressRoutePort

Creates an Azure ExpressRoutePort.

New-AzExpressRoutePortIdentity

Creates an Azure ExpressRoutePortIdentity.

Remove-AzExpressRouteCircuit

Removes an ExpressRoute circuit.

Remove-AzExpressRouteCircuitAuthorization

Removes an existing ExpressRoute configuration authorization.

Remove-AzExpressRouteCircuitConnectionConfig

Removes an ExpressRoute circuit connection configuration.

Remove-AzExpressRouteCircuitPeeringConfig

Removes an ExpressRoute circuit peering configuration.

Remove-AzExpressRouteConnection

Removes a ExpressRouteConnection.

Remove-AzExpressRouteCrossConnectionPeering

Removes an ExpressRoute cross connection peering configuration.

Remove-AzExpressRouteGateway

The Remove-AzExpressRouteGateway cmdlet removes an Azure ExpressRoute gateway. This is a gateway specific to Azure Virtual WAN's software defined connectivity.

Remove-AzExpressRoutePort

Removes an ExpressRoutePort.

Remove-AzExpressRoutePortIdentity

Removes a identity from an ExpressRoutePort.

Set-AzExpressRouteCircuit

Modifies an ExpressRoute circuit.

Set-AzExpressRouteCircuitPeeringConfig

Saves a modified ExpressRoute peering configuration.

Set-AzExpressRouteConnection

Updates an express route connection created between an express route gateway and on-premise express route circuit peering.

Set-AzExpressRouteCrossConnection

Modifies an ExpressRoute cross connection.

Set-AzExpressRouteGateway

Updates a Scalable ExpressRoute Gateway.

Set-AzExpressRoutePort

Modifies an ExpressRoutePort.

Set-AzExpressRoutePortIdentity

Updates a identity assigned to an ExpressRoutePort.

Load Balancer

Add-AzLoadBalancerBackendAddressPoolConfig

Adds a backend address pool configuration to a load balancer.

Add-AzLoadBalancerFrontendIpConfig

Adds a front-end IP configuration to a load balancer.

Add-AzLoadBalancerInboundNatPoolConfig

Adds an inbound NAT pool to a load balancer.

Add-AzLoadBalancerInboundNatRuleConfig

Adds an inbound NAT rule configuration to a load balancer.

Add-AzLoadBalancerOutboundRuleConfig

Adds an outbound rule configuration to a load balancer.

Add-AzLoadBalancerProbeConfig

Adds a probe configuration to a load balancer.

Add-AzLoadBalancerRuleConfig

Adds a rule configuration to a load balancer.

Get-AzLoadBalancer

Gets a load balancer.

Get-AzLoadBalancerBackendAddressPoolConfig

Gets a backend address pool configuration for a load balancer.

Get-AzLoadBalancerFrontendIpConfig

Gets a front-end IP configuration in a load balancer.

Get-AzLoadBalancerInboundNatPoolConfig

Gets one or more inbound NAT pool configurations from a load balancer.

Get-AzLoadBalancerInboundNatRuleConfig

Gets an inbound NAT rule configuration for a load balancer.

Get-AzLoadBalancerOutboundRuleConfig

Gets an outbound rule configuration in a load balancer.

Get-AzLoadBalancerProbeConfig

Gets a probe configuration for a load balancer.

Get-AzLoadBalancerRuleConfig

Gets the rule configuration for a load balancer.

New-AzLoadBalancer

Creates a load balancer.

New-AzLoadBalancerBackendAddressPoolConfig

Creates a backend address pool configuration for a load balancer.

New-AzLoadBalancerFrontendIpConfig

Creates a front-end IP configuration for a load balancer.

New-AzLoadBalancerInboundNatPoolConfig

Creates an inbound NAT pool configuration for a load balancer.

New-AzLoadBalancerInboundNatRuleConfig

Creates an inbound NAT rule configuration for a load balancer.

New-AzLoadBalancerOutboundRuleConfig

Creates an outbound rule configuration for a load balancer.

New-AzLoadBalancerProbeConfig

Creates a probe configuration for a load balancer.

New-AzLoadBalancerRuleConfig

Creates a rule configuration for a load balancer.

Remove-AzLoadBalancer

Removes a load balancer.

Remove-AzLoadBalancerBackendAddressPoolConfig

Removes a backend address pool configuration from a load balancer.

Remove-AzLoadBalancerFrontendIpConfig

Removes a front-end IP configuration from a load balancer.

Remove-AzLoadBalancerInboundNatPoolConfig

Removes an inbound NAT pool configuration from a load balancer.

Remove-AzLoadBalancerInboundNatRuleConfig

Removes an inbound NAT rule configuration from a load balancer.

Remove-AzLoadBalancerOutboundRuleConfig

Removes an outbound rule configuration from a load balancer.

Remove-AzLoadBalancerProbeConfig

Removes a probe configuration from a load balancer.

Remove-AzLoadBalancerRuleConfig

Removes a rule configuration for a load balancer.

Set-AzLoadBalancer

Updates a load balancer.

Set-AzLoadBalancerFrontendIpConfig

Updates a front-end IP configuration for a load balancer.

Set-AzLoadBalancerInboundNatPoolConfig

Sets an inbound NAT pool configuration for a load balancer.

Set-AzLoadBalancerInboundNatRuleConfig

Sets an inbound NAT rule configuration for a load balancer.

Set-AzLoadBalancerOutboundRuleConfig

Sets an outbound rule configuration for a load balancer.

Set-AzLoadBalancerProbeConfig

Updates a probe configuration for a load balancer.

Set-AzLoadBalancerRuleConfig

Updates a rule configuration for a load balancer.

Network Watcher

Get-AzNetworkWatcher

Gets the properties of a Network Watcher

Get-AzNetworkWatcherConnectionMonitor

Returns connection monitor with specified name or the list of connection monitors

Get-AzNetworkWatcherConnectionMonitorReport

Query a snapshot of the most recent connection states.

Get-AzNetworkWatcherFlowLogStatus

Gets the status of flow logging on a resource.

Get-AzNetworkWatcherNextHop

Gets the next hop from a VM.

Get-AzNetworkWatcherPacketCapture

Gets information and properties and status of a packet capture resource.

Get-AzNetworkWatcherReachabilityProvidersList

Lists all available internet service providers for a specified Azure region.

Get-AzNetworkWatcherReachabilityReport

Gets the relative latency score for internet service providers from a specified location to Azure regions.

Get-AzNetworkWatcherSecurityGroupView

View the configured and effective network security group rules applied on a VM.

Get-AzNetworkWatcherTopology

Gets a network level view of resources and their relationships in a resource group.

Get-AzNetworkWatcherTroubleshootingResult

Gets the troubleshooting result from the previously run or currently running troubleshooting operation.

Invoke-AzNetworkWatcherNetworkConfigurationDiagnostic

Invoke network configuration diagnostic session for specified network profiles on target resource.

New-AzNetworkWatcher

Creates a new Network Watcher resource.

New-AzNetworkWatcherConnectionMonitor

Creates a connection monitor.

New-AzNetworkWatcherNetworkConfigurationDiagnosticProfile

Creates a new network configuration diagnostic profile object.

New-AzNetworkWatcherPacketCapture

Creates a new packet capture resource and starts a packet capture session on a VM.

New-AzNetworkWatcherProtocolConfiguration

Creates a new protocol configuration object.

Remove-AzNetworkWatcher

Removes a Network Watcher.

Remove-AzNetworkWatcherConnectionMonitor

Remove connection monitor.

Remove-AzNetworkWatcherPacketCapture

Removes a packet capture resource.

Set-AzNetworkWatcherConfigFlowLog

Configures flow logging for a target resource.

Set-AzNetworkWatcherConnectionMonitor

Update a connection monitor.

Start-AzNetworkWatcherConnectionMonitor

Start a connection monitor

Start-AzNetworkWatcherResourceTroubleshooting

Starts troubleshooting on a Networking resource in Azure.

Stop-AzNetworkWatcherConnectionMonitor

Stop a connection monitor

Stop-AzNetworkWatcherPacketCapture

Stops a running packet capture session

Test-AzNetworkWatcherConnectivity

Returns connectivity information for a specified source VM and a destination.

Test-AzNetworkWatcherIPFlow

Returns whether the packet is allowed or denied to or from a particular destination.

Networking

Add-AzDelegation

Adds a delegation to a subnet.

Add-AzNetworkInterfaceIpConfig

Adds a network interface IP configuration to a network interface.

Add-AzNetworkInterfaceTapConfig

Creates a TapConfiguration resource associated to a NetworkInterface. This will reference to an existing VirtualNetworkTap resource.

Add-AzNetworkSecurityRuleConfig

Adds a network security rule configuration to a network security group.

Add-AzServiceEndpointPolicyDefinition

Adds a service endpoint policy definition to a specified policy.

Approve-AzPrivateEndpointConnection

Approves a private endpoint connection.

Deny-AzPrivateEndpointConnection

denies a private endpoint connection.

Get-AzApplicationSecurityGroup

Gets an application security group.

Get-AzAutoApprovedPrivateLinkService

Gets an array of private link service id that can be linked to a private end point with auto approved.

Get-AzAvailablePrivateEndpointType

Return available private end point types in the location

Get-AzAvailableServiceAlias

Get available service aliases in the region.

Get-AzAvailableServiceDelegation

Get available service delegations in the region.

Get-AzBastion

Gets a Bastion resource or Bastion resources.

Get-AzBgpServiceCommunity

Provides a list of all services / regions, BGP communities, and associated prefixes.

Get-AzDdosProtectionPlan

Gets a DDoS protection plan.

Get-AzDelegation

Get a delegation (or all of the delegations) on a given subnet.

Get-AzEffectiveNetworkSecurityGroup

Gets the effective network security group of a network interface.

Get-AzFirewall

Gets a Azure Firewall.

Get-AzFirewallFqdnTag

Gets the available Azure Firewall Fqdn Tags.

Get-AzFirewallPolicy

Gets a Azure Firewall Policy

Get-AzFirewallPolicyRuleCollectionGroup

Gets a Azure Firewall Policy Rule Collection Group

Get-AzIpGroup

Get an Azure IpGroup

Get-AzLocalNetworkGateway

Gets a Local Network Gateway

Get-AzNatGateway

Gets a Nat Gateway resource in a resource group by name or NatGateway Id or all Nat Gateway resources in a resource group.

Get-AzNetworkInterface

Gets a network interface.

Get-AzNetworkInterfaceIpConfig

Gets a network interface IP configuration for a network interface.

Get-AzNetworkInterfaceTapConfig

Gets a Tap configuration resource.

Get-AzNetworkProfile

Gets an existing network profile top level resource

Get-AzNetworkSecurityGroup

Gets a network security group.

Get-AzNetworkSecurityRuleConfig

Get a network security rule configuration for a network security group.

Get-AzNetworkServiceTag

Gets the list of service tag information resources.

Get-AzNetworkUsage

Lists network usages for a subscription

Get-AzPrivateEndpoint

Get a private endpoint

Get-AzPrivateEndpointConnection

Gets a private endpoint connection resource.

Get-AzPrivateLinkResource

Gets a private link resource.

Get-AzPrivateLinkService

Gets private link service

Get-AzPublicIpAddress

Gets a public IP address.

Get-AzPublicIpPrefix

Gets a public IP prefix

Get-AzServiceEndpointPolicy

Gets a service endpoint policy.

Get-AzServiceEndpointPolicyDefinition

Gets a service endpoint policy definition.

Get-AzVirtualHub

Gets an Azure VirtualHub by Name and ResourceGroupName or lists all Virtual Hubs by ResourceGroupName/Subscription.

Get-AzVirtualHubVnetConnection

Gets a Virtual Network Connection in a virtual hub or lists all virtual network connections in a virtual hub.

Get-AzVirtualWan

Gets a Virtual WAN or all Virtual WANs in a resource group or subscription.

New-AzApplicationSecurityGroup

Creates an application security group.

New-AzBastion

Creates a bastion resource.

New-AzContainerNicConfig

Creates a new container network interface configuration object.

New-AzContainerNicConfigIpConfig

Creates a container nic configuration ip configuration object.

New-AzDdosProtectionPlan

Creates a DDoS protection plan.

New-AzDelegation

Creates a service delegation.

New-AzFirewall

Creates a new Firewall in a resource group.

New-AzFirewallApplicationRule

Creates a Firewall Application Rule.

New-AzFirewallApplicationRuleCollection

Creates a collection of Firewall application rules.

New-AzFirewallNatRule

Creates a Firewall NAT Rule.

New-AzFirewallNatRuleCollection

Creates a collection of Firewall NAT rules.

New-AzFirewallNetworkRule

Creates a Firewall Network Rule.

New-AzFirewallNetworkRuleCollection

Creates a Azure Firewall Network Collection of Network rules.

New-AzFirewallPolicy

Creates a new Azure Firewall Policy

New-AzFirewallPolicyApplicationRule

Create a new Azure Firewall Policy Application Rule

New-AzFirewallPolicyFilterRuleCollection

Create a new Azure Firewall Policy Filter Rule Collection

New-AzFirewallPolicyNatRuleCollection

Create a new Azure Firewall Policy Nat Rule Collection

New-AzFirewallPolicyNetworkRule

Create a new Azure Firewall Policy Network Rule

New-AzFirewallPolicyRuleCollectionGroup

Create a new Azure Firewall Policy Rule Collection Group

New-AzFirewallThreatIntelWhitelist

Create a new threat intelligence whitelist for Azure Firewall

New-AzIpGroup

Creates an Azure IpGroup.

New-AzIpsecPolicy

Creates an IPSec Policy.

New-AzIpsecTrafficSelectorPolicy

Creates a traffic selector policy.

New-AzLocalNetworkGateway

Creates a Local Network Gateway

New-AzNatGateway

Create new Nat Gateway resource with properties Public Ip Address/Public Ip Prefix, IdleTimeoutInMinutes and Sku.

New-AzNetworkInterface

Creates a network interface.

New-AzNetworkInterfaceIpConfig

Creates a network interface IP configuration.

New-AzNetworkProfile

Creates a new network profile.

New-AzNetworkSecurityGroup

Creates a network security group.

New-AzNetworkSecurityRuleConfig

Creates a network security rule configuration.

New-AzPacketCaptureFilterConfig

Creates a new packet capture filter object.

New-AzPrivateEndpoint

Creates a private endpoint.

New-AzPrivateLinkService

Creates a private link service

New-AzPrivateLinkServiceConnection

Creates a private link service connection configuration.

New-AzPrivateLinkServiceIpConfig

Create a private link service ip configuration.

New-AzPublicIpAddress

Creates a public IP address.

New-AzPublicIpPrefix

Creates a Public IP Prefix

New-AzPublicIpTag

Creates an IP Tag.

New-AzServiceEndpointPolicy

Creates a service endpoint policy.

New-AzServiceEndpointPolicyDefinition

Creates a service endpoint policy definition.

New-AzVirtualHub

Creates an Azure VirtualHub resource.

New-AzVirtualHubVnetConnection

The New-AzVirtualHubVnetConnection cmdlet creates a HubVirtualNetworkConnection resource that peers a Virtual Network to the Azure Virtual Hub.

New-AzVirtualWan

Creates an Azure Virtual WAN.

Remove-AzApplicationSecurityGroup

Removes an application security group.

Remove-AzBastion

Removes a bastion resource.

Remove-AzDdosProtectionPlan

Removes a DDoS protection plan.

Remove-AzDelegation

Removes a service delegation from the provided subnet.

Remove-AzFirewall

Remove a Firewall.

Remove-AzFirewallPolicy

Removes an Azure Firewall Policy

Remove-AzFirewallPolicyRuleCollectionGroup

Removes a Azure Firewall Policy Rule Collection Group in a Azure firewall policy

Remove-AzIpGroup

Deletes an Azure IpGroup.

Remove-AzLocalNetworkGateway

Deletes a Local Network Gateway

Remove-AzNatGateway

Remove Nat Gateway resource.

Remove-AzNetworkInterface

Removes a network interface.

Remove-AzNetworkInterfaceIpConfig

Removes a network interface IP configuration from a network interface.

Remove-AzNetworkInterfaceTapConfig

Removes a tap configuration from given network interface

Remove-AzNetworkProfile

Removes a network profile.

Remove-AzNetworkSecurityGroup

Removes a network security group.

Remove-AzNetworkSecurityRuleConfig

Removes a network security rule from a network security group.

Remove-AzPrivateEndpoint

Removes a private endpoint.

Remove-AzPrivateEndpointConnection

Removes a private endpoint connection.

Remove-AzPrivateLinkService

Removes a private link service

Remove-AzPublicIpAddress

Removes a public IP address.

Remove-AzPublicIpPrefix

Removes a public IP prefix

Remove-AzServiceEndpointPolicy

Removes a service endpoint policy.

Remove-AzServiceEndpointPolicyDefinition

Removes a service endpoint policy definition.

Remove-AzVirtualHub

Removes an Azure VirtualHub resource.

Remove-AzVirtualHubVnetConnection

The Remove-AzVirtualHubVnetConnection cmdlet removes an Azure Virtual Network Connection which peers a remote VNET to the hub VNET.

Remove-AzVirtualWan

Removes an Azure Virtual WAN.

Set-AzFirewall

Saves a modified Firewall.

Set-AzFirewallPolicy

Saves a modified azure firewall policy

Set-AzFirewallPolicyRuleCollectionGroup

saves a modified azure firewall policy rule collection group

Set-AzIpGroup

Saves a modified Firewall.

Set-AzLocalNetworkGateway

Modifies a local network gateway.

Set-AzNatGateway

Update Nat Gateway Resource with Public Ip Address, Public Ip Prefix and IdleTimeoutInMinutes.

Set-AzNetworkInterface

Updates a network interface.

Set-AzNetworkInterfaceIpConfig

Updates an IP configuration for a network interface.

Set-AzNetworkInterfaceTapConfig

Updates a tap configuration for a network interface.

Set-AzNetworkProfile

Updates a network profile.

Set-AzNetworkSecurityGroup

Updates a network security group.

Set-AzNetworkSecurityRuleConfig

Updates a network security rule configuration for a network security group.

Set-AzPrivateEndpoint

Updates a private endpoint.

Set-AzPrivateEndpointConnection

Updates a private endpoint connection state on private link service.

Set-AzPrivateLinkService

Updates a private link service.

Set-AzPublicIpAddress

Updates a public IP address.

Set-AzPublicIpPrefix

Sets the Tags for an existing PublicIpPrefix

Set-AzServiceEndpointPolicy

Updates a service endpoint policy.

Set-AzServiceEndpointPolicyDefinition

Updates a service endpoint policy definition.

Set-AzVirtualHub

Modifies a Virtual Hub to add a Virtual HUb Route Table to it.

Start-AzVirtualnetworkGatewayPacketCapture

Starts Packet Capture Operation on a Virtual Network Gateway.

Test-AzPrivateIPAddressAvailability

Test availability of a private IP address in a virtual network.

Test-AzPrivateLinkServiceVisibility

The Test-AzPrivateLinkServiceVisibility checks whether a private link service is visible for current use.

Update-AzVirtualHub

Updates a virtual hub.

Update-AzVirtualHubVnetConnection

Updates an existing HubVirtualNetworkConnection.

Update-AzVirtualWan

Updates an Azure Virtual WAN.

Route

Add-AzRouteConfig

Adds a route to a route table.

Add-AzRouteFilterRuleConfig

Adds a route filter rule to a route filter.

Add-AzVirtualHubRoute

Creates a VirtualHubRoute object which can be passed as parameter to the Add-AzVirtualHubRouteTable command.

Add-AzVirtualHubRouteTable

Creates a Virtual Hub Route Table resource which is a child of VirtualHub.

Add-AzVirtualRouterPeer

Add a Peer to an Azure VirtualRouter

Get-AzEffectiveRouteTable

Gets the effective route table of a network interface.

Get-AzRouteConfig

Gets routes from a route table.

Get-AzRouteFilter

Gets a route filter.

Get-AzRouteFilterRuleConfig

Gets a route filter rule in a route filter.

Get-AzRouteTable

Gets route tables.

Get-AzVirtualHubRouteTable

Gets a Virtual Hub Route Table in a virtual hub or lists all route tables in a virtual hub.

Get-AzVirtualRouter

Get an Azure VirtualRouter

Get-AzVirtualRouterPeer

Gets a VirtualRouter peer in an Azure VirtualRouter

New-AzRouteConfig

Creates a route for a route table.

New-AzRouteFilter

Creates a route filter.

New-AzRouteFilterRuleConfig

Creates a route filter rule for a route filter.

New-AzRouteTable

Creates a route table.

New-AzVirtualHubRoute

Creates an Azure Virtual Hub Route object.

New-AzVirtualHubRouteTable

Creates an Azure Virtual Hub Route Table object.

New-AzVirtualRouter

Creates an Azure VirtualRouter.

Remove-AzRouteConfig

Removes a route from a route table.

Remove-AzRouteFilter

Removes a route filter.

Remove-AzRouteFilterRuleConfig

Removes a route filter rule from a route filter.

Remove-AzRouteTable

Removes a route table.

Remove-AzVirtualHubRouteTable

Delete a virtual hub route table resource associated with a virtual hub.

Remove-AzVirtualRouter

Deletes an Azure VirtualRouter.

Remove-AzVirtualRouterPeer

Removes a Peer from an Azure VirtualRouter

Set-AzRouteConfig

Updates a route configuration for a route table.

Set-AzRouteFilter

Updates a route filter.

Set-AzRouteFilterRuleConfig

Modifies the route filter rule of a route filter.

Set-AzRouteTable

Updates a route table.

Update-AzVirtualRouterPeer

Update a Peer in an Azure VirtualRouter

VPN

Add-AzVpnClientRevokedCertificate

Adds a VPN client-revocation certificate.

Add-AzVpnClientRootCertificate

Adds a VPN client root certificate.

Get-AzP2sVpnGateway

Gets an existing P2SVpnGateway under VirtualHub.

Get-AzP2sVpnGatewayConnectionHealth

Gets the current aggregared point to site connections health infomation from P2SVpnGateway.

Get-AzP2sVpnGatewayDetailedConnectionHealth

Gets the detailed information of current point to site connections from P2SVpnGateway.

Get-AzP2sVpnGatewayVpnProfile

Generates and returns a SAS url for customer to download Vpn profile for point to site client setup to have point to site connectivity to P2SVpnGateway.

Get-AzVirtualWanVpnConfiguration

Gets the Vpn configuration for a subset of VpnSites connected to this WAN via VpnConnections. Uploads the generated Vpn

Get-AzVirtualWanVpnServerConfiguration

Gets the list of all VpnServerConfigurations that are associated with this VirtualWan.

Get-AzVirtualWanVpnServerConfigurationVpnProfile

Generates and downloads Vpn profile at VirtualWan-VpnServerConfiguration level for Point to site client setup.

Get-AzVpnClientConfiguration

Allows users to easily download the Vpn Profile package that was generated using the New-AzVpnClientConfiguration commandlet.

Get-AzVpnClientIpsecParameter

Gets the vpn Ipsec parameters set on Virtual Network Gateway for Point to site connections.

Get-AzVpnClientPackage

Gets information about a VPN client package.

Get-AzVpnClientRevokedCertificate

Gets information about VPN client-revocation certificates.

Get-AzVpnClientRootCertificate

Gets information about VPN root certificates.

Get-AzVpnConnection

Gets a vpn connection by name or lists all vpn connections connected to a VpnGateway.

Get-AzVpnGateway

Gets a VpnGateway resource using ResourceGroupName and GatewayName OR lists all gateways by ResourceGroupName or SubscriptionId.

Get-AzVpnServerConfiguration

Gets an existing VpnServerConfiguration for point to site connectivity.

Get-AzVpnSite

Gets an Azure VpnSite resource by name OR lists all VpnSites in a ResourceGroup or SubscriptionId.

New-AzP2sVpnGateway

Create a new P2SVpnGateway under VirtualHub for point to site connectivity.

New-AzVpnClientConfiguration

This command allows the users to create the Vpn profile package based on pre-configured vpn settings on the VPN gateway, in addition to some additional settings that users may need to configure, for e.g. some root certificates.

New-AzVpnClientIpsecParameter

This command allows the users to create the Vpn ipsec parameters object specifying one or all values such as IpsecEncryption,IpsecIntegrity,IkeEncryption,IkeIntegrity,DhGroup,PfsGroup to set on the existing VPN gateway.

New-AzVpnClientIpsecPolicy

This command allows the users to create the Vpn ipsec policy object specifying one or all values such as IpsecEncryption,IpsecIntegrity,IkeEncryption,IkeIntegrity,DhGroup,PfsGroup to set on the VPN gateway. This command let output object is used to set vpn ipsec policy for both new / existing gateway.

New-AzVpnClientRevokedCertificate

Creates a new VPN client-revocation certificate.

New-AzVpnClientRootCertificate

Creates a new VPN client root certificate.

New-AzVpnConnection

Creates a IPSec connection that connects a VpnGateway to a remote customer branch represented in RM as a VpnSite.

New-AzVpnGateway

Creates a Scalable VPN Gateway.

New-AzVpnServerConfiguration

Create a new VpnServerConfiguration for point to site connectivity.

New-AzVpnSite

Creates a new Azure VpnSite resource. This is an RM representation of customer branches that are uploaded to Azure

New-AzVpnSiteLink

Creates an Azure VpnSiteLink object.

New-AzVpnSiteLinkConnection

Creates an Azure VpnSiteLinkConnection object.

Remove-AzP2sVpnGateway

Removes an existing P2SVpnGateway.

Remove-AzVpnClientIpsecParameter

Removes Vpn custom ipsec policy set on Virtual Network Gateway resource.

Remove-AzVpnClientRevokedCertificate

Removes a VPN client-revocation certificate.

Remove-AzVpnClientRootCertificate

Removes an existing VPN client root certificate.

Remove-AzVpnConnection

Removes a VpnConnection.

Remove-AzVpnGateway

The Remove-AzVpnGateway cmdlet removes an Azure VPN gateway. This is a gateway specific to Azure Virtual WAN's software defined connectivity.

Remove-AzVpnServerConfiguration

Removes an existing VpnServerConfiguration.

Remove-AzVpnSite

Removes an Azure VpnSite resource.

Set-AzVpnClientIpsecParameter

Sets the vpn ipsec parameters for existing virtual network gateway.

Update-AzP2sVpnGateway

Update an existing P2SVpnGateway under VirtualHub for point to site connectivity.

Update-AzVpnConnection

Updates a VPN connection.

Update-AzVpnGateway

Updates a scalable VPN gateway.

Update-AzVpnServerConfiguration

Updates an existing VpnServerConfiguration.

Update-AzVpnSite

Updates a VPN site.

Virtual Network

Add-AzVirtualNetworkGatewayIpConfig

Adds an IP configuration to a virtual network gateway.

Add-AzVirtualNetworkPeering

Creates a peering between two virtual networks.

Add-AzVirtualNetworkSubnetConfig

Adds a subnet configuration to a virtual network.

Get-AzVirtualNetwork

Gets a virtual network in a resource group.

Get-AzVirtualNetworkAvailableEndpointService

Lists available endpoint services for location.

Get-AzVirtualNetworkGateway

Gets a Virtual Network Gateway

Get-AzVirtualNetworkGatewayAdvertisedRoute

Lists routes being advertised by an Azure virtual network gateway

Get-AzVirtualNetworkGatewayBGPPeerStatus

Lists an Azure virtual network gateway's BGP peers

Get-AzVirtualNetworkGatewayConnection

Gets a Virtual Network Gateway Connection

Get-AzVirtualNetworkGatewayConnectionSharedKey

Displays the shared key used for the connection.

Get-AzVirtualNetworkGatewayConnectionVpnDeviceConfigScript

This commandlet takes the connection resource, VPN device brand, model, firmware version, and return the corresponding configuration script that customers can apply directly on their on-premises VPN devices. The script will follow the syntax of the selected device, and fill in the necessary parameters such as Azure gateway public IP addresses, virtual network address prefixes, VPN tunnel pre-shared key, etc. so customers can simply copy-paste to their VPN device configurations.

Get-AzVirtualNetworkGatewayLearnedRoute

Lists routes learned by an Azure virtual network gateway

Get-AzVirtualNetworkGatewaySupportedVpnDevice

This commandlet returns a list of supported VPN device brands, models, and firmware versions.

Get-AzVirtualNetworkGatewayVpnClientConnectionHealth

Get the list of vpn client connection health of an Azure virtual network gateway for per vpn client connection

Get-AzVirtualNetworkPeering

Gets the virtual network peering.

Get-AzVirtualNetworkSubnetConfig

Gets a subnet in a virtual network.

Get-AzVirtualNetworkTap

Gets a virtual network tap

Get-AzVirtualNetworkUsageList

Gets virtual network current usage.

New-AzVirtualNetwork

Creates a virtual network.

New-AzVirtualNetworkGateway

Creates a Virtual Network Gateway

New-AzVirtualNetworkGatewayConnection

Creates the Site-to-Site VPN connection between the virtual network gateway and the on-prem VPN device.

New-AzVirtualNetworkGatewayIpConfig

Creates an IP Configuration for a Virtual Network Gateway

New-AzVirtualNetworkSubnetConfig

Creates a virtual network subnet configuration.

New-AzVirtualNetworkTap

Creates a VirtualNetworkTap resource.

Remove-AzVirtualNetwork

Removes a virtual network.

Remove-AzVirtualNetworkGateway

Deletes a Virtual Network Gateway

Remove-AzVirtualNetworkGatewayConnection

Deletes a Virtual Network Gateway Connection

Remove-AzVirtualNetworkGatewayDefaultSite

Removes the default site from a virtual network gateway.

Remove-AzVirtualNetworkGatewayIpConfig

Removes an IP Configuration from a Virtual Network Gateway

Remove-AzVirtualNetworkPeering

Removes a virtual network peering.

Remove-AzVirtualNetworkSubnetConfig

Removes a subnet configuration from a virtual network.

Remove-AzVirtualNetworkTap

Removes a virtual network tap.

Reset-AzVirtualNetworkGateway

Resets the Virtual Network Gateway

Reset-AzVirtualNetworkGatewayConnectionSharedKey

Resets the shared key of the virtual network gateway connection.

Resize-AzVirtualNetworkGateway

Resizes an existing virtual network gateway.

Set-AzVirtualNetwork

Updates a virtual network.

Set-AzVirtualNetworkGateway

Updates a virtual network gateway.

Set-AzVirtualNetworkGatewayConnection

Configures a virtual network gateway connection.

Set-AzVirtualNetworkGatewayConnectionSharedKey

Configures the shared key of the virtual network gateway connection.

Set-AzVirtualNetworkGatewayDefaultSite

Sets the default site for a virtual network gateway.

Set-AzVirtualNetworkPeering

Configures a virtual network peering.

Set-AzVirtualNetworkSubnetConfig

Updates a subnet configuration for a virtual network.

Set-AzVirtualNetworkTap

Updates a virtual network tap.

Start-AzVirtualNetworkGatewayConnectionPacketCapture

Starts Packet Capture Operation on a Virtual Network Gateway Connection.

Stop-AzVirtualNetworkGatewayConnectionPacketCapture

Stops Packet Capture Operation on a Virtual Network Gateway connection

Stop-AzVirtualNetworkGatewayPacketCapture

Stops Packet Capture Operation on a Virtual Network Gateway.