Set-CMTSStepOfflineEnableBitLocker
Configure an instance of the Pre-provision BitLocker task sequence step.
Syntax
Set-CMTSStepOfflineEnableBitLocker
[-Disk <Int32>]
[-Drive <String>]
[-EnableSkipWhenTpmInvalid <Boolean>]
[-EncryptionMethod <DiskEncryptionMethod>]
[-NextPartition]
[-Partition <Int32>]
[-VariableName <String>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
-InputObject <IResultObject>
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-Disk <Int32>]
[-Drive <String>]
[-EnableSkipWhenTpmInvalid <Boolean>]
[-EncryptionMethod <DiskEncryptionMethod>]
[-NextPartition]
[-Partition <Int32>]
[-VariableName <String>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-Disk <Int32>]
[-Drive <String>]
[-EnableSkipWhenTpmInvalid <Boolean>]
[-EncryptionMethod <DiskEncryptionMethod>]
[-NextPartition]
[-Partition <Int32>]
[-VariableName <String>]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-Condition <IResultObject[]>]
-InputObject <IResultObject>
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
-InputObject <IResultObject>
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
-TaskSequenceId <String>
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
-TaskSequenceName <String>
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
-InputObject <IResultObject>
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
-InputObject <IResultObject>
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
-InputObject <IResultObject>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
-InputObject <IResultObject>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
-InputObject <IResultObject>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
-InputObject <IResultObject>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
-TaskSequenceId <String>
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
-TaskSequenceName <String>
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepOfflineEnableBitLocker
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
Use this cmdlet to configure an instance of the Pre-provision BitLocker task sequence step.
For more information on this step, see About task sequence steps: Pre-provision BitLocker.
Note
Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.
Examples
Example 1
This example changes the Pre-provision BitLocker step in the Default OS deployment task sequence to use specific disk and partition numbers, and save the logical drive letter as a variable.
$tsNameOsd = "Default OS deployment"
$tsStepNamePreProvBitLocker = "Pre-provision BitLocker"
Set-CMTSStepOfflineEnableBitLocker -TaskSequenceName $tsNameOsd -StepName $tsStepNamePreProvBitLocker -Disk 1 -Partition 2 -VariableName "BitLockerDrive"Parameters
-AddCondition
Specify a condition object to add to this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.
| Type: | IResultObject[] |
| Aliases: | AddConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClearCondition
Remove a condition from this step. Use the -Condition parameter to specify the condition to remove.
| Type: | SwitchParameter |
| Aliases: | ClearConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Condition
Specify a condition object to use with this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.
| Type: | IResultObject[] |
| Aliases: | SubCondition, SubConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ConditionVariableName
Specify the name of the task sequence variable to use as a condition.
| Type: | String |
| Aliases: | Variable |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ConditionVariableValue
Specify the value of the task sequence variable to use in a condition.
| Type: | String |
| Aliases: | Value |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
Specify an optional description for this task sequence step.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableWildcardHandling
This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Disk
Specify the specific disk number to encrypt. Use this parameter with the -Partition parameter.
| Type: | Int32 |
| Aliases: | DestinationDisk |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Drive
Specify the logical drive letter to encrypt. For example, C:
| Type: | String |
| Aliases: | SpecificDrive |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableSkipWhenTpmInvalid
Set this parameter to true to skip this step for computers that don't have a TPM or when the TPM isn't enabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EncryptionMethod
Applies to version 2006 and later. Use this parameter to specify the disk encryption mode. By default or if not specified, the step continues to use the default encryption method for the OS version.
| Type: | DiskEncryptionMethod |
| Aliases: | DiskEncryptionMethod |
| Accepted values: | DoNotSpecify, AES_128, AES_256, XTS_AES128, XTS_AES256, TotalCount |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileDateTimeOperator
Specify a variable operator type for a file date/time condition.
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FilePath
Specify the path for a file condition.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileTimestamp
Specify a date/time value to use for a file condition.
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileVersion
Specify a version string for a file condition.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderDateTimeOperator
Specify a variable operator type for a folder date/time condition.
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderPath
Specify the path for a folder condition.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderTimestamp
Specify a date/time value to use for a folder condition.
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceWildcardHandling
This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
Specify a task sequence object from which to get the Pre-provision BitLocker step. To get this object, use the Get-CMTaskSequence cmdlet.
| Type: | IResultObject |
| Aliases: | TaskSequence |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IsAnyVersion
Use this parameter with the SetConditionSoftware parameter to match any version of the product.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IsContinueOnError
Use this parameter to enable the step option Continue on error. When you enable this option, if the step fails, the task sequence continues.
| Type: | Boolean |
| Aliases: | IsThisStepContinueOnError |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IsEnabled
Use this parameter to enable this task sequence step.
| Type: | Boolean |
| Aliases: | IsThisStepEnabled |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MoveToIndex
Move this step to the specified index position in the task sequence.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MsiFilePath
Specify the path to a Windows Installer file for a software condition.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Namespace
Specify the namespace for a WMI query condition.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NewStepName
Use this parameter to rename this task sequence step.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NextPartition
Add this parameter to configure BitLocker to apply to the next available formatted partition.
| Type: | SwitchParameter |
| Aliases: | UseNextAvailableFormattedPartition |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OperatorType
Specify an operator to use with a task sequence variable condition.
| Type: | VariableOperatorType |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Partition
Specify the specific partition number to encrypt. Use this parameter with the -Disk parameter.
| Type: | Int32 |
| Aliases: | DestinationPartition |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Query
Specify a WMI query string to use for a condition.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryKey
Specify the key to use with a registry condition.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryOperator
Specify an operator to use with a registry condition.
| Type: | VariableOperatorType |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryValueData
Specify the value data to use with a registry condition.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryValueName
Specify the value name to use with a registry condition.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionFile
Use this parameter to remove a file condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionFolder
Use this parameter to remove a folder condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionIfStatement
Use this parameter to remove an if statement condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionOperatingSystem
Use this parameter to remove an OS condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionQueryWmi
Use this parameter to remove a WMI query condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionRegistry
Use this parameter to remove a registry condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionSoftware
Use this parameter to remove a software condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionVariable
Use this parameter to remove a task sequence variable condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RootKey
Specify the root key to use with a registry condition.
| Type: | RegistryRootKeyType |
| Accepted values: | HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionFile
Add a new file condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionFolder
Add a new folder condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionIfStatement
Add a new if statement condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionOperatingSystem
Add a new OS condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionQueryWmi
Add a new WMI query condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionRegistry
Add a new registry condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionSoftware
Add a new software condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionVariable
Add a new task sequence variable condition.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StatementType
Set the type for an if statement condition.
| Type: | ConditionStatementType |
| Aliases: | Operator |
| Accepted values: | All, Any, None |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StepName
Specify the name of the step to select for changes.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StepOrder
Use this parameter to reorder the step in the task sequence.
| Type: | ReorderType |
| Accepted values: | MoveUp, MoveDown, MoveToIndex |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SupportedPlatform
Use this parameter to specify the platforms for an OS condition.
| Type: | IResultObject[] |
| Aliases: | SupportedPlatforms |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TaskSequenceId
Specify the ID of the task sequence to target for changes.
| Type: | String |
| Aliases: | Id, TaskSequencePackageId |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TaskSequenceName
Specify the name of the task sequence to target for changes.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ValueType
Specify the type of value for a registry condition.
| Type: | RegistryValueType |
| Accepted values: | RegistrySZ, RegistryExpandSZ, RegistryDWord |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VariableName
Specify a task sequence variable to identify the logical drive letter as the destination for BitLocker.
| Type: | String |
| Aliases: | DestinationVariable |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VersionOperator
Specify an operator to use with a file condition.
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. It doesn't run the cmdlet.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
Outputs
System.Object
Related Links
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for