Set-DnsServerDnsSecZoneSetting
Changes settings for DNSSEC for a zone.
Syntax
Set-DnsServerDnsSecZoneSetting
[-ZoneName] <String>
[[-DenialOfExistence] <String>]
[-AsJob]
[-CimSession <CimSession[]>]
[-ComputerName <String>]
[-DistributeTrustAnchor <String[]>]
[-DnsKeyRecordSetTtl <TimeSpan>]
[-DSRecordGenerationAlgorithm <String[]>]
[-DSRecordSetTtl <TimeSpan>]
[-EnableRfc5011KeyRollover <Boolean>]
[-NSec3HashAlgorithm <String>]
[-NSec3Iterations <UInt16>]
[-NSec3OptOut <Boolean>]
[-NSec3RandomSaltLength <Byte>]
[-NSec3UserSalt <String>]
[-ParentHasSecureDelegation <Boolean>]
[-PassThru]
[-PropagationTime <TimeSpan>]
[-SecureDelegationPollingPeriod <TimeSpan>]
[-SignatureInceptionOffset <TimeSpan>]
[-ThrottleLimit <Int32>]
[-Confirm]
[-WhatIf] Description
The Set-DnsServerDnsSecZoneSetting cmdlet changes Domain Name System Security Extensions (DNSSEC) settings for the specified zone on a Domain Name System (DNS) server.
You can select which version of Next Secure (NSEC) to use to provide authenticated denial of existence. Set the DenialOfExistence parameter to NSec or NSec3. If you use NSec3, you can use either random salt or user-defined salt.
Examples
Example 1: Modify RFC 5011 settings
PS C:\> Set-DnsServerDnsSecZoneSetting -ZoneName "west01.contoso.com" -EnableRfc5011KeyRollover $true -PassThru -VerboseThis command modifies RFC 5011 settings for a zone named west01.contoso.com. The example uses the PassThru parameter to produce output and the Verbose parameter to include all output.
Parameters
-AsJob
ps_cimcommon_asjob
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ComputerName
Specifies a DNS server. If you do not specify this parameter, the command runs on the local system. You can specify an IP address or any value that resolves to an IP address, such as a fully qualified domain name (FQDN), host name, or NETBIOS name.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DenialOfExistence
Specifies which version of NSEC to use. A DNS server uses this setting to provide signed proof of an unregistered name.
The acceptable values for this parameter are:
- NSec
- NSec3
| Type: | String |
| Position: | 3 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DistributeTrustAnchor
Specifies an array of trust anchors that a DNS server distributes in Active Directory® Domain Services. DNS servers do not distribute trust anchors by default. If the DNS server is not also a domain controller, it adds trust anchors only to the local trust anchor store.
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DnsKeyRecordSetTtl
Specifies a time-span object that represents the Time to Live (TTL) value of a DNS key record.
| Type: | TimeSpan |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DSRecordGenerationAlgorithm
Specifies an array of cryptographic algorithms for domain service records. The acceptable values for this parameter are:
- Sha1
- Sha256
- Sha384
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-DSRecordSetTtl
Specifies a TTL time span for the set of domain service records. The default value is the same as the TTL for the zone.
| Type: | TimeSpan |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-EnableRfc5011KeyRollover
Specifies whether a server uses RFC 5011 key rollover.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NSec3HashAlgorithm
Specifies an NSEC3 hash algorithm. The only possible value is RsaSha1.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NSec3Iterations
Specifies a number of NSEC3 hash iterations to perform when it signs a DNS zone. The default value is 50.
| Type: | UInt16 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NSec3OptOut
Specifies whether to sign the DNS zone by using NSEC opt-out. The default value is $False.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NSec3RandomSaltLength
Specifies the length of a salt value. The default length is 8.
| Type: | Byte |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-NSec3UserSalt
Specifies a user salt string. The default value is Null or -.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ParentHasSecureDelegation
Specifies whether a parent has secure delegation for a zone. The default value is $False.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-PropagationTime
Specifies a propagation time as a time-span object. This is the expected time required to propagate zone changes.
| Type: | TimeSpan |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-SecureDelegationPollingPeriod
Specifies a delegation polling period as a time-span object. This is the time between polling attempts for key rollovers for child zones. The default value is 12 hours.
| Type: | TimeSpan |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-SignatureInceptionOffset
Specifies the signature inception as a time-span object. This value is how far in the past DNSSEC signature validity periods begin. The default value is one hour.
| Type: | TimeSpan |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ZoneName
Specifies the name of a DNS zone.
| Type: | String |
| Position: | 2 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
Outputs
Related Links
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for