Set-EdgeSyncServiceConfig

This cmdlet is available only in on-premises Exchange. Use the Set-EdgeSyncServiceConfig cmdlet to modify the configuration of edge synchronization service settings that control the general synchronization behavior shared by all EdgeSync services. For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax (https://technet.microsoft.com/library/bb123552.aspx).

Syntax

Set-EdgeSyncServiceConfig
   [-Identity] <EdgeSyncServiceConfigIdParameter>
   [-ConfigurationSyncInterval <EnhancedTimeSpan>]
   [-Confirm]
   [-CookieValidDuration <EnhancedTimeSpan>]
   [-DomainController <Fqdn>]
   [-FailoverDCInterval <EnhancedTimeSpan>]
   [-LockDuration <EnhancedTimeSpan>]
   [-LockRenewalDuration <EnhancedTimeSpan>]
   [-LogEnabled <$true | $false>]
   [-LogLevel <None | Low | Medium | High>]
   [-LogMaxAge <EnhancedTimeSpan>]
   [-LogMaxDirectorySize <Unlimited>]
   [-LogMaxFileSize <Unlimited>]
   [-LogPath <String>]
   [-Name <String>]
   [-OptionDuration <EnhancedTimeSpan>]
   [-RecipientSyncInterval <EnhancedTimeSpan>]
   [-WhatIf]
   [<CommonParameters>]

Description

You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet (https://technet.microsoft.com/library/mt432940.aspx).

Examples

-------------------------- Example 1 --------------------------

Set-EdgeSyncServiceConfig "Primary EdgeSync Settings" -LogEnabled $true -LogLevel Medium -LogPath "\\Server01\EdgeSyncLog" -LogMaxFileSize 5MB -LogMaxAge 3

This example configures the Microsoft Exchange EdgeSync service settings named Primary EdgeSync Settings with the following values:

EdgeSync logging is enabled and set to the medium detail level.

The log files are stored in the EdgeSyncLog share on the server named Server01.

The maximum individual log file size is 5 megabytes (MB).

The log files are kept for 3 days.

Required Parameters

-Identity

The Identity parameter specifies the name of the Microsoft Exchange EdgeSync service you want to configure.

Type:EdgeSyncServiceConfigIdParameter
Position:1
Default value:None
Accept pipeline input:True
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016

Optional Parameters

-ConfigurationSyncInterval

The ConfigurationSyncInterval parameter specifies how frequently the Microsoft Exchange EdgeSync service synchronizes configuration data. The default value is 3 minutes.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Type:EnhancedTimeSpan
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-Confirm

The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.

  • Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax: -Confirm:$false.

  • Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-CookieValidDuration

The CookieValidDuration parameter specifies how long a cookie record is valid. The default value is 21 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Type:EnhancedTimeSpan
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-DomainController

The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.

Type:Fqdn
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-FailoverDCInterval

The FailoverDCInterval parameter specifies how long EdgeSync waits before failing over to another domain controller if it can't read configuration data from Active Directory. The default value is 5 minutes.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Type:EnhancedTimeSpan
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-LockDuration

The LockDuration parameter specifies how long an instance of the Microsoft Exchange EdgeSync service can maintain an exclusive lock on the synchronization rights. While an EdgeSync service maintains an exclusive lock on synchronization rights, no other EdgeSync service can take over synchronization. The default value is 6 minutes.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Type:EnhancedTimeSpan
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-LockRenewalDuration

The LockRenewalDuration parameter specifies how long before the expiry of an exclusive lock an EdgeSync service can renew the lock. The default value is 4 minutes.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Type:EnhancedTimeSpan
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-LogEnabled

The LogEnabled parameter specifies enables or disables the EdgeSyncLog. Valid input for this parameter is $true or $false. The default value is $true.

Type:$true | $false
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-LogLevel

The LogLevel parameter specifies the EdgeSync logging level. Valid values for this parameter are None, Low, Medium and High. The default value is None.

Type:None | Low | Medium | High
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-LogMaxAge

The LogMaxAge parameter specifies the maximum duration in days to keep the EdgeSyncLog files. Log files older than the specified value can be overwritten. The default value is 30 days.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Type:EnhancedTimeSpan
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-LogMaxDirectorySize

The LogMaxDirectorySize specifies the maximum amount of disk space the EdgeSyncLog directory can use. The default value is 250 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of the LogMaxFileSize parameter must be less than or equal to the value of the LogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the EdgeSyncLog directory.

Type:Unlimited
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-LogMaxFileSize

The LogMaxFileSize parameter specifies the maximum log file size for the EdgeSyncLog files. The default value is 10 MB.

When you enter a value, qualify the value with one of the following units:

  • B (bytes)

  • KB (kilobytes)

  • MB (megabytes)

  • GB (gigabytes)

  • TB (terabytes)

Unqualified values are typically treated as bytes, but small values may be rounded up to the nearest kilobyte.

The value of the LogMaxFileSize parameter must be less than or equal to the value of the LogMaxDirectorySize parameter. The valid input range for either parameter is from 1 through 9223372036854775807 bytes. If you enter a value of unlimited, no size limit is imposed on the EdgeSyncLog files.

Type:Unlimited
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-LogPath

The LogPath parameter specifies the disk location to store the EdgeSyncLog files. The default value is TransportRoles\Logs\EdgeSync\.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-Name

The Name parameter specifies a unique name for the EdgeSync service configuration.

Type:String
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-OptionDuration

The OptionDuration parameter specifies how long an instance of the Microsoft Exchange EdgeSync service can maintain an optional lock on the synchronization rights. While an EdgeSync service maintains an optional lock on synchronization rights, another EdgeSync service can take over synchronization after the optional lock has expired if it's initiated using the Start-EdgeSynchronization command. The default value is 30 minutes.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Type:EnhancedTimeSpan
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-RecipientSyncInterval

The RecipientSyncInterval parameter specifies how frequently the Microsoft Exchange EdgeSync service synchronizes recipient data from the global catalog. The default value is 5 minutes.

To specify a value, enter it as a time span: dd.hh:mm:ss where dd = days, hh = hours, mm = minutes, and ss = seconds.

Type:EnhancedTimeSpan
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016
-WhatIf

The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Accept pipeline input:False
Accept wildcard characters:False
Applies to:Exchange Server 2010, Exchange Server 2013, Exchange Server 2016

Inputs

To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.

Outputs

To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types (https://go.microsoft.com/fwlink/p/?LinkId=616387). If the Output Type field is blank, the cmdlet doesn't return data.